The transition from Global Offensive to Counter-Strike 2 marked the end of the DX9 era for Valve. The new Source 2 engine introduces physically based rendering and dynamic smoke that interacts with lighting, significantly changing the performance profile. While CS:GO was light on the GPU, CS2 requires a competent card to handle these effects without stuttering. It remains CPU-heavy at competitive settings, where the 'sub-tick' server architecture demands strong single-thread performance. CPUs with large L3 caches, like AMD's X3D line, offer a major advantage. 8GB of RAM is now the absolute minimum, though more is recommended to avoid hitches.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 257 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 172 FPS. At 4K, all settings exceed 71 FPS.
The GeForce RTX 4060 Ti is 40% above the recommended GPU (GeForce RTX 2070) for Counter-Strike 2. The Ryzen 7 7800X3D is 97% above the recommended CPU (Core i7-9700K).
Counter-Strike 2 supports: AFMF. This game does not have native DLSS 3 or FSR 3 Frame Generation support. AFMF is AMD-exclusive and not compatible with GeForce RTX 4060 Ti.
The GeForce RTX 4060 Ti sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $764. At 1080p Ultra, this combo delivers 257 FPS, equivalent to 0.34 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.538 fps/$ | 0.475 fps/$ | 0.390 fps/$ | 0.336 fps/$ |
| 1440p | 0.369 fps/$ | 0.318 fps/$ | 0.255 fps/$ | 0.225 fps/$ |
| 4k | 0.153 fps/$ | 0.127 fps/$ | 0.106 fps/$ | 0.093 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k ultra, the GeForce RTX 4060 Ti sets the ceiling at about 58 FPS, while the Ryzen 7 7800X3D has headroom up to 274 FPS. In this scenario, the GPU limits the CPU potential by 79% (FPS gap: 216 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your GeForce RTX 4060 Ti is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 43% | GPU Limits CPU 41% | GPU Limits CPU 51% | GPU Limits CPU 62% |
| 1440p (2K QHD) | GPU Limits CPU 57% | GPU Limits CPU 58% | GPU Limits CPU 63% | GPU Limits CPU 71% |
| 4K (Ultra HD) | GPU Limits CPU 73% | GPU Limits CPU 75% | GPU Limits CPU 77% | GPU Limits CPU 79% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 97% above and your GPU is 40% above the recommended specs. High/Ultra at 1080p. Lower settings for higher resolutions.
+97%vsrecommended
+40%vsrecommended
+1247%vsminimum
+461%vsminimum
Yes, the Ryzen 7 7800X3D paired with the GeForce RTX 4060 Ti can run Counter-Strike 2 smoothly up to 4k achieving around 71 FPS at Ultra quality. Your GPU is 40% above the recommended specs, and your CPU is 97% above the recommended requirements.
This CPU + GPU combo costs approximately $764 ($384 CPU (Rank #212 Value) + $380 GPU (Rank #27 Value)). Your build is already very cost-efficient, but if you want even more FPS, the next good option is upgrading the GPU. For example, upgrading to the GeForce RTX 4070 Ti for around $799 (Rank #42 for value) could deliver noticeably better performance.
For Counter-Strike 2, upgrading the GPU would give you the most noticeable improvement. The GeForce RTX 4060 Ti is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p high, 1080p low, 1080p medium, 1080p ultra, 1440p high, 1440p low, 1440p medium, 1440p ultra, 4k high, 4k low, 4k medium, 4k ultra.
Counter-Strike 2 currently only supports AFMF (AMD Fluid Motion Frames) for frame generation, which is an AMD-exclusive technology. Because you are using an NVIDIA GPU, you cannot use Frame Generation for this specific game. However, the game does support FSR Upscaling, which you should enable to render at a lower resolution and use AI to significantly boost your FPS without losing visual quality.
Counter-Strike 2 requires at minimum a Core i5 750 (CPU) and GeForce GTX 660 (GPU) with 8 GB RAM and 85 GB storage. For the recommended experience, you need a Core i7-9700K and GeForce RTX 2070 with 16 GB RAM. Your Ryzen 7 7800X3D and GeForce RTX 4060 Ti both exceed the recommended specs, so you're well-positioned for a great experience.
These Counter-Strike 2 FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
