Fortnite serves as a showcase for Unreal Engine 5. In 'Performance Mode', it runs on almost anything. However, enabling 'Lumen' (global illumination) and 'Nanite' (virtualized geometry) requires a powerful RTX 30/40 series GPU to maintain 60 FPS. The building mechanics also add a significant CPU load, especially in competitive end-games with dense player structures.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 152 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 105 FPS. At 4K, frame rates range from 49 to 140 FPS.
The GeForce RTX 4060 Ti is 40% above the recommended GPU (GeForce GTX 1080) for Fortnite. The Ryzen 7 7800X3D is 161% above the recommended CPU (Core i5-7300U).
The GeForce RTX 4060 Ti sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $764. At 1080p Ultra, this combo delivers 152 FPS, equivalent to 0.2 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.568 fps/$ | 0.452 fps/$ | 0.271 fps/$ | 0.199 fps/$ |
| 1440p | 0.366 fps/$ | 0.267 fps/$ | 0.192 fps/$ | 0.137 fps/$ |
| 4k | 0.183 fps/$ | 0.130 fps/$ | 0.096 fps/$ | 0.064 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k high, the GeForce RTX 4060 Ti sets the ceiling at about 70 FPS, while the Ryzen 7 7800X3D has headroom up to 115 FPS. In this scenario, the GPU limits the CPU potential by 39% (FPS gap: 45 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your GeForce RTX 4060 Ti is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 25% | GPU Limits CPU 26% | GPU Limits CPU 11% | GPU Limits CPU 20% |
| 1440p (2K QHD) | GPU Limits CPU 27% | GPU Limits CPU 29% | GPU Limits CPU 22% | GPU Limits CPU 23% |
| 4K (Ultra HD) | GPU Limits CPU 29% | GPU Limits CPU 32% | GPU Limits CPU 39% | GPU Limits CPU 34% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU35% - 78% <> GPU35% - 52% <> | CPU28% - 74% <> GPU73% - 78% <> | CPU29% - 62% <> GPU82% - 99% <> | CPU29% - 59% <> GPU97% - 99% <> |
| 1440p (2K QHD) | CPU30% - 50% <> GPU42% - 60% <> | CPU24% - 49% <> GPU78% - 90% <> | CPU23% - 36% <> GPU96% - 100% <> | CPU22% - 36% <> GPU97% - 100% <> |
| 4K (Ultra HD) | CPU32% - 52% <> GPU41% - 60% <> | CPU27% - 52% <> GPU78% - 93% <> | CPU27% - 41% <> GPU97% - 99% <> | CPU27% - 43% <> GPU96% - 100% <> |
The Ryzen 7 7800X3D + GeForce RTX 4060 Ti pairing runs this title with CPU utilization between 22% and 78% and GPU utilization between 35% and 100%. Ryzen 7 7800X3D keeps significant headroom across presets, while GeForce RTX 4060 Ti carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 77% at 1080p to 83% at 4K, while CPU averages move from 49% to 38%.
From a utilization perspective, this is a GPU-heavy load profile. At 1080p (Full HD) Ultra, the GeForce RTX 4060 Ti averages 98% usage (97-99%), while the Ryzen 7 7800X3D stays at 44% (29-59%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.
At 1080p, averages sit around CPU 49% and GPU 77%. At 1440p, that shifts to CPU 34% and GPU 83%, and at 4K it reaches CPU 38% and GPU 83%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
1080p (Full HD) High is the most balanced preset based on this dataset. It runs around CPU 46% (29-62%) and GPU 90% (82-99%), which keeps GeForce RTX 4060 Ti well utilized without constant max-out behavior while Ryzen 7 7800X3D remains stable for consistent frame delivery.
Upgrade priority should be the GPU. The GeForce RTX 4060 Ti reaches 98% average load at 1080p (Full HD) Ultra while the Ryzen 7 7800X3D still has headroom, so a faster graphics card would deliver the largest uplift.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 161% above and your GPU is 40% above the recommended specs. High/Ultra at 1080p. Lower settings for higher resolutions.
+161%vsrecommended
+40%vsrecommended
+435%vsminimum
+269%vsminimum
Yes, the Ryzen 7 7800X3D paired with the GeForce RTX 4060 Ti can run Fortnite smoothly up to 1440p achieving around 105 FPS at Ultra quality. Your GPU is 40% above the recommended specs, and your CPU is 161% above the recommended requirements.
This CPU + GPU combo costs approximately $764 ($384 CPU (Rank #212 Value) + $380 GPU (Rank #27 Value)). Your build is already very cost-efficient, but if you want even more FPS, the next good option is upgrading the GPU. For example, upgrading to the GeForce RTX 4070 Ti for around $799 (Rank #42 for value) could deliver noticeably better performance.
For Fortnite, upgrading the GPU would give you the most noticeable improvement. The GeForce RTX 4060 Ti is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Fortnite does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Fortnite requires at minimum a Core i3-3225 (CPU) and GeForce GTX 960 (GPU) with 8 GB RAM and 30 GB storage. For the recommended experience, you need a Core i5-7300U and GeForce GTX 1080 with 16 GB RAM. Your Ryzen 7 7800X3D and GeForce RTX 4060 Ti both exceed the recommended specs, so you're well-positioned for a great experience.
These Fortnite FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
