A competitor to Overwatch featuring environmental destruction, which makes it CPU heavy. DX12 and 12GB of RAM are the minimum requirements.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 159 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 103 FPS. At 4K, frame rates range from 58 to 106 FPS.
The GeForce RTX 4060 Ti is 37% above the recommended GPU (GeForce RTX 2060 Super) for Marvel Rivals. The Ryzen 7 7800X3D is 57% above the recommended CPU (Core i5-10400).
Marvel Rivals supports: DLSS Frame Gen, FSR 3 Frame Gen, AFMF. The GeForce RTX 4060 Ti can use DLSS Frame Gen and FSR 3 Frame Gen, providing up to 2x-3x frame rate boost.
The GeForce RTX 4060 Ti sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $764. At 1080p Ultra, this combo delivers 159 FPS, equivalent to 0.21 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.360 fps/$ | 0.310 fps/$ | 0.247 fps/$ | 0.208 fps/$ |
| 1440p | 0.262 fps/$ | 0.211 fps/$ | 0.158 fps/$ | 0.135 fps/$ |
| 4k | 0.139 fps/$ | 0.109 fps/$ | 0.096 fps/$ | 0.076 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1080p medium, the GeForce RTX 4060 Ti sets the ceiling at about 203 FPS, while the Ryzen 7 7800X3D has headroom up to 451 FPS. In this scenario, the GPU limits the CPU potential by 55% (FPS gap: 248 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your GeForce RTX 4060 Ti is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 52% | GPU Limits CPU 55% | GPU Limits CPU 54% | GPU Limits CPU 50% |
| 1440p (2K QHD) | GPU Limits CPU 40% | GPU Limits CPU 45% | GPU Limits CPU 52% | GPU Limits CPU 53% |
| 4K (Ultra HD) | GPU Limits CPU 41% | GPU Limits CPU 46% | GPU Limits CPU 48% | GPU Limits CPU 49% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 57% above and your GPU is 37% above the recommended specs. High/Ultra at 1080p. Lower settings for higher resolutions.
+57%vsrecommended
+37%vsrecommended
+164%vsminimum
+125%vsminimum
Yes, the Ryzen 7 7800X3D paired with the GeForce RTX 4060 Ti can run Marvel Rivals smoothly up to 1440p achieving around 103 FPS at Ultra quality. Your GPU is 37% above the recommended specs, and your CPU is 57% above the recommended requirements.
This CPU + GPU combo costs approximately $764 ($384 CPU (Rank #212 Value) + $380 GPU (Rank #27 Value)). Your build is already very cost-efficient, but if you want even more FPS, the next good option is upgrading the GPU. For example, upgrading to the GeForce RTX 4070 Ti for around $799 (Rank #42 for value) could deliver noticeably better performance.
For Marvel Rivals, upgrading the GPU would give you the most noticeable improvement. The GeForce RTX 4060 Ti is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p high, 1080p low, 1080p medium, 1080p ultra, 1440p high, 1440p low, 1440p medium, 1440p ultra, 4k high, 4k low, 4k medium, 4k ultra.
Yes! Marvel Rivals supports DLSS Frame Gen and FSR 3 Frame Gen and AFMF, and your GeForce RTX 4060 Ti is compatible with DLSS Frame Gen and FSR 3 Frame Gen. With Frame Generation enabled, you can expect a 2x-3x FPS multiplier on top of native framerates, significantly boosting perceived smoothness.
Marvel Rivals requires at minimum a Core i5-6600K (CPU) and GeForce GTX 1060 (GPU) with 12 GB RAM and 70 GB storage. For the recommended experience, you need a Core i5-10400 and GeForce RTX 2060 Super with 16 GB RAM. Your Ryzen 7 7800X3D and GeForce RTX 4060 Ti both exceed the recommended specs, so you're well-positioned for a great experience.
These Marvel Rivals FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
