Built for massive sieges, this MMO creates a significant CPU bottleneck in large battles. 16GB of RAM is the minimum, setting a standard for next-gen MMOs.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 87 FPS. At 1440p, all settings exceed 78 FPS. At 4K, frame rates range from 46 to 71 FPS.
The GeForce RTX 4060 is 45% above the recommended GPU (GeForce GTX 1660) for Throne and Liberty. The Ryzen 7 7800X3D is 76% above the recommended CPU (Core i5-11600K).
Throne and Liberty supports: AFMF. This game does not have native DLSS 3 or FSR 3 Frame Generation support. AFMF is AMD-exclusive and not compatible with GeForce RTX 4060.
The GeForce RTX 4060 sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $683. At 1080p Ultra, this combo delivers 87 FPS, equivalent to 0.13 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.179 fps/$ | 0.158 fps/$ | 0.138 fps/$ | 0.127 fps/$ |
| 1440p | 0.160 fps/$ | 0.151 fps/$ | 0.133 fps/$ | 0.114 fps/$ |
| 4k | 0.104 fps/$ | 0.097 fps/$ | 0.078 fps/$ | 0.067 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k high, the GeForce RTX 4060 sets the ceiling at about 51 FPS, while the Ryzen 7 7800X3D has headroom up to 126 FPS. In this scenario, the GPU limits the CPU potential by 60% (FPS gap: 75 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your GeForce RTX 4060 is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 53% | GPU Limits CPU 53% | GPU Limits CPU 55% | GPU Limits CPU 53% |
| 1440p (2K QHD) | GPU Limits CPU 52% | GPU Limits CPU 53% | GPU Limits CPU 55% | GPU Limits CPU 52% |
| 4K (Ultra HD) | GPU Limits CPU 59% | GPU Limits CPU 59% | GPU Limits CPU 60% | GPU Limits CPU 57% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 76% above and your GPU is 45% above the recommended specs. High/Ultra at 1080p. Lower settings for higher resolutions.
+76%vsrecommended
+45%vsrecommended
+161%vsminimum
+219%vsminimum
Yes, the Ryzen 7 7800X3D paired with the GeForce RTX 4060 can run Throne and Liberty smoothly up to 1440p achieving around 78 FPS at Ultra quality. Your GPU is 45% above the recommended specs, and your CPU is 76% above the recommended requirements.
This CPU + GPU combo costs approximately $683 ($384 CPU (Rank #212 Value) + $299 GPU (Rank #12 Value)). Your build is already very cost-efficient, but if you want even more FPS, the next good option is upgrading the GPU. For example, upgrading to the GeForce RTX 3070 Ti for around $599 (Rank #37 for value) could deliver noticeably better performance.
For Throne and Liberty, upgrading the GPU would give you the most noticeable improvement. The GeForce RTX 4060 is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p high, 1080p low, 1080p medium, 1080p ultra, 1440p high, 1440p low, 1440p medium, 1440p ultra, 4k high, 4k low, 4k medium, 4k ultra.
Throne and Liberty currently only supports AFMF (AMD Fluid Motion Frames) for frame generation, which is an AMD-exclusive technology. Because you are using an NVIDIA GPU, you cannot use Frame Generation for this specific game. However, the game does support DLSS Upscaling and FSR Upscaling and XeSS, which you should enable to render at a lower resolution and use AI to significantly boost your FPS without losing visual quality.
Throne and Liberty requires at minimum a Core i5-7700 (CPU) and GeForce GTX 960 (GPU) with 16 GB RAM and 63 GB storage. For the recommended experience, you need a Core i5-11600K and GeForce GTX 1660 with 16 GB RAM. Your Ryzen 7 7800X3D and GeForce RTX 4060 both exceed the recommended specs, so you're well-positioned for a great experience.
These Throne and Liberty FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
