Destiny 2FPS onRyzen 7 7800X3D&GeForce RTX 4070 Mobile

Destiny 2

Uses the stable Tiger engine. It has dropped support for older OSs and requires significant storage space. A decent CPU is needed for raids and activities with many enemies.

Destiny 2 - FPS Estimates by Resolution

Actual FPS may vary based on RAM speed, background processes, and other system factors

1080P
low241 FPS
medium216 FPS
high189 FPS
ultra173 FPS
1440P
low195 FPS
medium167 FPS
high149 FPS
ultra139 FPS
4K
low127 FPS
medium103 FPS
high90 FPS
ultra83 FPS

Performance Report

Destiny 2

GeForce RTX 4070 Mobile + Ryzen 7 7800X3D
🎮Visual Experience

At 1080p, all quality settings exceed 173 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 139 FPS. At 4K, all settings exceed 83 FPS.

Official Requirements

The GeForce RTX 4070 Mobile is 115% above the recommended GPU (GeForce GTX 970) for Destiny 2. The Ryzen 7 7800X3D is 164% above the recommended CPU (Core i5-2400).

⚙️FPS Ceiling Analysis

The GeForce RTX 4070 Mobile sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.

Performance Limiter Analysis

Ryzen 7 7800X3D|GeForce RTX 4070 Mobile

This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.

📈Analysis

At 1440p ultra, the GeForce RTX 4070 Mobile sets the ceiling at about 138 FPS, while the Ryzen 7 7800X3D has headroom up to 250 FPS. In this scenario, the GPU limits the CPU potential by 45% (FPS gap: 112 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.

Verdict

GPU Limits CPU

Your GeForce RTX 4070 Mobile is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.

🧩Detailed Breakdown
1080p (Full HD)
LowGPU Limits CPU 17%
MediumGPU Limits CPU 19%
HighGPU Limits CPU 19%
UltraGPU Limits CPU 31%
1440p (2K QHD)
LowGPU Limits CPU 31%
MediumGPU Limits CPU 37%
HighGPU Limits CPU 39%
UltraGPU Limits CPU 45%
4K (Ultra HD)
LowGPU Limits CPU 33%
MediumGPU Limits CPU 40%
HighGPU Limits CPU 39%
UltraGPU Limits CPU 43%
Percentages show how much potential FPS of the stronger component is lost because the other component has a lower FPS ceiling.
🧠Methodology

We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.

Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.

CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.

A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.

📊Predicted Hardware Utilization for Ryzen 7 7800X3D and GeForce RTX 4070 Mobile

1080p (Full HD)

Low
CPU2% - 27%
<>
GPU71% - 95%
<>
Medium
CPU2% - 27%
<>
GPU71% - 95%
<>
High
CPU22% - 50%
<>
GPU85% - 99%
<>
Ultra
CPU19% - 40%
<>
GPU90% - 98%
<>

1440p (2K QHD)

Low
CPU7% - 27%
<>
GPU75% - 95%
<>
Medium
CPU7% - 27%
<>
GPU75% - 95%
<>
High
CPU20% - 44%
<>
GPU94% - 100%
<>
Ultra
CPU17% - 35%
<>
GPU99% - 100%
<>

4K (Ultra HD)

Low
CPU4% - 22%
<>
GPU75% - 95%
<>
Medium
CPU4% - 22%
<>
GPU75% - 95%
<>
High
CPU16% - 40%
<>
GPU95% - 100%
<>
Ultra
CPU11% - 31%
<>
GPU99% - 100%
<>

Performance Summary

The Ryzen 7 7800X3D + GeForce RTX 4070 Mobile pairing runs this title with CPU utilization between 2% and 50% and GPU utilization between 71% and 100%. Ryzen 7 7800X3D keeps significant headroom across presets, while GeForce RTX 4070 Mobile carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 88% at 1080p to 92% at 4K, while CPU averages move from 24% to 19%.

Load Interpretation

From a utilization perspective, this is a GPU-heavy load profile. At 1440p (2K QHD) Ultra, the GeForce RTX 4070 Mobile averages 100% usage (99-100%), while the Ryzen 7 7800X3D stays at 26% (17-35%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.

Resolution Scaling

At 1080p, averages sit around CPU 24% and GPU 88%. At 1440p, that shifts to CPU 23% and GPU 92%, and at 4K it reaches CPU 19% and GPU 92%. This shows that workload scaling is limited, which can indicate engine-side constraints.

Optimal Settings Recommendation

1440p (2K QHD) Low is the most balanced preset based on this dataset. It runs around CPU 17% (7-27%) and GPU 85% (75-95%), which keeps GeForce RTX 4070 Mobile well utilized without constant max-out behavior while Ryzen 7 7800X3D remains stable for consistent frame delivery.

Upgrade Insight

Upgrade priority should be the GPU. The GeForce RTX 4070 Mobile reaches 100% average load at 1440p (2K QHD) Ultra while the Ryzen 7 7800X3D still has headroom, so a faster graphics card would deliver the largest uplift.

Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.

Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.

  • High GPU Load: You typically want to see High GPU Utilization (90%+) and moderate CPU usage when visual settings are heavy. This indicates the graphics pipeline is under strong load, but the exact FPS limiter should still be confirmed by the FPS ceiling analysis.
  • High CPU Load: If you see High CPU Utilization (85%+) paired with lower GPU utilization, the processor is handling a disproportionate share of frame preparation and game logic. That can point to CPU-side pressure, but it should not be treated as a direct replacement for FPS ceiling analysis.
  • Low CPU and GPU Load: If both CPU and GPU utilization are relatively low, it means the hardware is waiting on something else. This could be a game engine limitation, poorly optimized code, or an artificial framerate cap like VSync holding performance back. It does not mean both parts are equally fast in FPS terms.

Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.

Destiny 2 Requirements Comparison

See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.

CPU - Ryzen 7 7800X3D
cpu icon
34,293
Your Score
MinimumCore i3-3250
RecommendedCore i5-2400
GPU - GeForce RTX 4070 Mobile
gpu icon
20,702
Your Score
MinimumGeForce GTX 660
RecommendedGeForce GTX 970

Your CPU is 164% above and your GPU is 115% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.

CPU

+164%vsrecommended

GPU

+115%vsrecommended

CPU

+977%vsminimum

GPU

+412%vsminimum

Minimum Requirements
Video Card: GeForce GTX 660
Processor: Core i3-3250
Memory: 6 GB
Disk Space: 105 GB
System: Windows 10 64-bit
Recommended Requirements
Video Card: GeForce GTX 970
Processor: Core i5-2400
Memory: 8 GB
Disk Space: 105 GB (SSD)
System: Windows 10 64-bit

Frequently Asked Questions

1Can the Ryzen 7 7800X3D and GeForce RTX 4070 Mobile run Destiny 2 well?

Yes, the Ryzen 7 7800X3D paired with the GeForce RTX 4070 Mobile can run Destiny 2 smoothly up to 4k achieving around 83 FPS at Ultra quality. Your GPU is 115% above the recommended specs, and your CPU is 164% above the recommended requirements.

2Is there a more cost-effective setup to run Destiny 2?

Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.

3Which component should I upgrade first to improve Destiny 2 performance?

For Destiny 2, upgrading the GPU would give you the most noticeable improvement. The GeForce RTX 4070 Mobile is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.

4Does this setup support Frame Generation for Destiny 2?

Destiny 2 does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.

5What are the minimum and recommended specs for Destiny 2?

Destiny 2 requires at minimum a Core i3-3250 (CPU) and GeForce GTX 660 (GPU) with 6 GB RAM and 105 GB storage. For the recommended experience, you need a Core i5-2400 and GeForce GTX 970 with 8 GB RAM. Your Ryzen 7 7800X3D and GeForce RTX 4070 Mobile both exceed the recommended specs, so you're well-positioned for a great experience.

6How accurate are these Destiny 2 FPS estimates for the Ryzen 7 7800X3D and GeForce RTX 4070 Mobile?

These Destiny 2 FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.

Performance estimates are based on synthetic benchmarks and hardware capabilities.

Results may vary based on drivers, OS, and background processes.