Bethesda's Creation Engine 2 is CPU-dependent, especially in cities, and requires an SSD for asset streaming. Optimization tends to favor AMD slightly, but generally requires powerful hardware to run smoothly.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 84 FPS. At 1440p, all settings exceed 81 FPS. At 4K, all settings exceed 60 FPS.
The GeForce RTX 4070 Ti is 26% above the recommended GPU (GeForce RTX 2080) for Starfield. The Ryzen 7 7800X3D is 89% above the recommended CPU (Core i5-10600K).
Starfield supports: FSR 3 Frame Gen, AFMF. The GeForce RTX 4070 Ti can use FSR 3 Frame Gen, providing up to 1.5x-2x frame rate boost.
The GeForce RTX 4070 Ti sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $974. At 1080p Ultra, this combo delivers 84 FPS, equivalent to 0.09 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.120 fps/$ | 0.106 fps/$ | 0.097 fps/$ | 0.086 fps/$ |
| 1440p | 0.112 fps/$ | 0.101 fps/$ | 0.097 fps/$ | 0.083 fps/$ |
| 4k | 0.088 fps/$ | 0.080 fps/$ | 0.072 fps/$ | 0.062 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1440p medium, the GeForce RTX 4070 Ti sets the ceiling at about 81 FPS, while the Ryzen 7 7800X3D has headroom up to 190 FPS. In this scenario, the GPU limits the CPU potential by 57% (FPS gap: 109 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your GeForce RTX 4070 Ti is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 40% | GPU Limits CPU 47% | GPU Limits CPU 46% | GPU Limits CPU 47% |
| 1440p (2K QHD) | GPU Limits CPU 50% | GPU Limits CPU 57% | GPU Limits CPU 55% | GPU Limits CPU 56% |
| 4K (Ultra HD) | GPU Limits CPU 29% | GPU Limits CPU 36% | GPU Limits CPU 37% | GPU Limits CPU 39% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 89% above and your GPU is 26% above the recommended specs. High/Ultra at 1080p. Lower settings for higher resolutions.
+89%vsrecommended
+26%vsrecommended
+147%vsminimum
+115%vsminimum
Yes, the Ryzen 7 7800X3D paired with the GeForce RTX 4070 Ti can run Starfield smoothly up to 4k achieving around 60 FPS at Ultra quality. Your GPU is 26% above the recommended specs, and your CPU is 89% above the recommended requirements.
This CPU + GPU combo costs approximately $974 ($384 CPU (Rank #212 Value) + $590 GPU (Rank #42 Value)). Your GeForce RTX 4070 Ti provides phenomenal top-tier performance but at a premium enthusiast price. Since you are essentially at the ceiling of current hardware capabilities, there are no meaningful performance upgrades available. However, if you wanted a more cost-effective build that still delivers a great experience, you could theoretically step down to a high-end card with a significantly better value rating. For example, upgrading to the GeForce RTX 5090 for around $1999 (Rank #80 for value) could deliver noticeably better performance.
Your GeForce RTX 4070 Ti is already a top-tier graphics card. While it's technically the limiting factor here (which means you are fully utilizing your GPU's visual horsepower exactly as intended), there is no meaningful upgrade path that would drastically improve your Starfield performance right now. GPU fully utilized at: 1080p high, 1080p low, 1080p medium, 1080p ultra, 1440p high, 1440p low, 1440p medium, 1440p ultra, 4k high, 4k low, 4k medium, 4k ultra.
Yes! Starfield supports FSR 3 Frame Gen and AFMF, and your GeForce RTX 4070 Ti is compatible with FSR 3 Frame Gen. With Frame Generation enabled, you can expect a 1.5x-2x FPS multiplier on top of native framerates, significantly boosting perceived smoothness.
Starfield requires at minimum a Core i7-6800K (CPU) and GeForce GTX 1070 Ti (GPU) with 16 GB RAM and 125 GB (SSD Obrigatório) storage. For the recommended experience, you need a Core i5-10600K and GeForce RTX 2080 with 16 GB RAM. Your Ryzen 7 7800X3D and GeForce RTX 4070 Ti both exceed the recommended specs, so you're well-positioned for a great experience.
These Starfield FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
