This 'Pokémon with guns' survival game runs on Unreal Engine. It is CPU-heavy due to AI simulation for the many creatures. Memory leaks can occur in long sessions, making 16GB of RAM a practical minimum.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 226 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 193 FPS. At 4K, all settings exceed 101 FPS.
The GeForce RTX 4090 D is 90% above the recommended GPU (GeForce RTX 2070) for Palworld. The Ryzen 7 7800X3D is 53% above the recommended CPU (Core i9-9900K).
Palworld supports: AFMF. This game does not have native DLSS 3 or FSR 3 Frame Generation support. AFMF is AMD-exclusive and not compatible with GeForce RTX 4090 D.
The GeForce RTX 4090 D sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1440p low, the GeForce RTX 4090 D sets the ceiling at about 205 FPS, while the Ryzen 7 7800X3D has headroom up to 256 FPS. In this scenario, the GPU limits the CPU potential by 20% (FPS gap: 51 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your GeForce RTX 4090 D is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 12% | GPU Limits CPU 10% | GPU Limits CPU 9% | GPU Limits CPU 10% |
| 1440p (2K QHD) | GPU Limits CPU 20% | GPU Limits CPU 19% | GPU Limits CPU 20% | GPU Limits CPU 19% |
| 4K (Ultra HD) | GPU Limits CPU 12% | GPU Limits CPU 10% | GPU Limits CPU 11% | GPU Limits CPU 10% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU35% - 47% <> GPU83% - 89% <> | CPU21% - 37% <> GPU84% - 98% <> | CPU25% - 48% <> GPU87% - 100% <> | CPU25% - 44% <> GPU86% - 100% <> |
| 1440p (2K QHD) | CPU32% - 39% <> GPU89% - 95% <> | CPU18% - 38% <> GPU97% - 98% <> | CPU20% - 43% <> GPU100% - 100% | CPU19% - 39% <> GPU100% - 100% |
| 4K (Ultra HD) | CPU28% - 39% <> GPU89% - 96% <> | CPU14% - 38% <> GPU98% - 98% | CPU15% - 42% <> GPU100% - 100% | CPU15% - 42% <> GPU100% - 100% |
The Ryzen 7 7800X3D + GeForce RTX 4090 D pairing runs this title with CPU utilization between 14% and 48% and GPU utilization between 83% and 100%. Ryzen 7 7800X3D keeps significant headroom across presets, while GeForce RTX 4090 D carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 91% at 1080p to 98% at 4K, while CPU averages move from 35% to 29%.
From a utilization perspective, this is a GPU-heavy load profile. At 1440p (2K QHD) High, the GeForce RTX 4090 D averages 100% usage (100-100%), while the Ryzen 7 7800X3D stays at 32% (20-43%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.
At 1080p, averages sit around CPU 35% and GPU 91%. At 1440p, that shifts to CPU 31% and GPU 98%, and at 4K it reaches CPU 29% and GPU 98%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
1080p (Full HD) Low is the most balanced preset based on this dataset. It runs around CPU 41% (35-47%) and GPU 86% (83-89%), which keeps GeForce RTX 4090 D well utilized without constant max-out behavior while Ryzen 7 7800X3D remains stable for consistent frame delivery.
Upgrade priority should be the GPU. The GeForce RTX 4090 D reaches 100% average load at 1440p (2K QHD) High while the Ryzen 7 7800X3D still has headroom, so a faster graphics card would deliver the largest uplift.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 53% above and your GPU is 90% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+53%vsrecommended
+90%vsrecommended
+344%vsminimum
+510%vsminimum
Yes, the Ryzen 7 7800X3D paired with the GeForce RTX 4090 D can run Palworld smoothly up to 4k achieving around 101 FPS at Ultra quality. Your GPU is 90% above the recommended specs, and your CPU is 53% above the recommended requirements.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
Your GeForce RTX 4090 D is already a top-tier graphics card. While it's technically the limiting factor here (which means you are fully utilizing your GPU's visual horsepower exactly as intended), there is no meaningful upgrade path that would drastically improve your Palworld performance right now. GPU fully utilized at: 1080p high, 1080p low, 1080p medium, 1080p ultra, 1440p high, 1440p low, 1440p medium, 1440p ultra, 4k high, 4k low, 4k medium, 4k ultra.
Palworld currently only supports AFMF (AMD Fluid Motion Frames) for frame generation, which is an AMD-exclusive technology. Because you are using an NVIDIA GPU, you cannot use Frame Generation for this specific game. However, the game does support DLSS Upscaling and FSR Upscaling and XeSS, which you should enable to render at a lower resolution and use AI to significantly boost your FPS without losing visual quality.
Palworld requires at minimum a Core i5-3570K (CPU) and GeForce GTX 1050 (GPU) with 16 GB RAM and 40 GB (SSD) storage. For the recommended experience, you need a Core i9-9900K and GeForce RTX 2070 with 32 GB RAM. Your Ryzen 7 7800X3D and GeForce RTX 4090 D both exceed the recommended specs, so you're well-positioned for a great experience.
These Palworld FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
