Built for massive sieges, this MMO creates a significant CPU bottleneck in large battles. 16GB of RAM is the minimum, setting a standard for next-gen MMOs.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 175 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 146 FPS. At 4K, all settings exceed 100 FPS.
The GeForce RTX 4090 D is 128% above the recommended GPU (GeForce GTX 1660) for Throne and Liberty. The Ryzen 7 7800X3D is 76% above the recommended CPU (Core i5-11600K).
Throne and Liberty supports: AFMF. This game does not have native DLSS 3 or FSR 3 Frame Generation support. AFMF is AMD-exclusive and not compatible with GeForce RTX 4090 D.
The GeForce RTX 4090 D sets the FPS ceiling at 1440p high, while the Ryzen 7 7800X3D still has additional frame-generation headroom. The FPS ceiling is closely matched at all 1080p settings, 1440p (low/medium/ultra), all 4k settings.
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1440p high, the GeForce RTX 4090 D sets the ceiling at about 164 FPS, while the Ryzen 7 7800X3D has headroom up to 179 FPS. In this scenario, the GPU limits the CPU potential by 8% (FPS gap: 15 FPS). Overall distribution: GPU limits 2/12 cells, CPU limits 0/12, balanced 10/12.
The Ryzen 7 7800X3D and GeForce RTX 4090 D stay close in effective frame-generation ceiling across most presets, so neither side consistently suppresses the other by a large margin.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | Balanced | Balanced | Balanced | Balanced |
| 1440p (2K QHD) | Balanced | Balanced | GPU Limits CPU 8% | Balanced |
| 4K (Ultra HD) | Balanced | Balanced | GPU Limits CPU 7% | Balanced |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 76% above and your GPU is 128% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+76%vsrecommended
+128%vsrecommended
+161%vsminimum
+401%vsminimum
Yes, the Ryzen 7 7800X3D paired with the GeForce RTX 4090 D can run Throne and Liberty smoothly up to 4k achieving around 100 FPS at Ultra quality. Your GPU is 128% above the recommended specs, and your CPU is 76% above the recommended requirements.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
Your GeForce RTX 4090 D is already a top-tier graphics card. While it's technically the limiting factor here (which means you are fully utilizing your GPU's visual horsepower exactly as intended), there is no meaningful upgrade path that would drastically improve your Throne and Liberty performance right now. GPU fully utilized at: 1440p high.
Throne and Liberty currently only supports AFMF (AMD Fluid Motion Frames) for frame generation, which is an AMD-exclusive technology. Because you are using an NVIDIA GPU, you cannot use Frame Generation for this specific game. However, the game does support DLSS Upscaling and FSR Upscaling and XeSS, which you should enable to render at a lower resolution and use AI to significantly boost your FPS without losing visual quality.
Throne and Liberty requires at minimum a Core i5-7700 (CPU) and GeForce GTX 960 (GPU) with 16 GB RAM and 63 GB storage. For the recommended experience, you need a Core i5-11600K and GeForce GTX 1660 with 16 GB RAM. Your Ryzen 7 7800X3D and GeForce RTX 4090 D both exceed the recommended specs, so you're well-positioned for a great experience.
These Throne and Liberty FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
