An asymmetrical horror game locked at 60 FPS. It is generally GPU-limited at high settings but runs on most mid-range hardware.
This game has a built-in FPS cap of 60 FPS
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, frame rates range from 44 to 108 FPS depending on quality settings. At 1440p, frame rates range from 36 to 87 FPS. At 4K, frame rates range from 22 to 59 FPS.
The GeForce RTX 5060 Laptop GPU is 261% above the recommended GPU (GeForce GTX 760) for Dead by Daylight. The Ryzen 7 7800X3D is 543% above the recommended CPU (Core i3-4170).
The GeForce RTX 5060 Laptop GPU sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k ultra, the GeForce RTX 5060 Laptop GPU sets the ceiling at about 19 FPS, while the Ryzen 7 7800X3D has headroom up to 82 FPS. In this scenario, the GPU limits the CPU potential by 77% (FPS gap: 63 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your GeForce RTX 5060 Laptop GPU is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 35% | GPU Limits CPU 53% | GPU Limits CPU 55% | GPU Limits CPU 63% |
| 1440p (2K QHD) | GPU Limits CPU 47% | GPU Limits CPU 61% | GPU Limits CPU 62% | GPU Limits CPU 70% |
| 4K (Ultra HD) | GPU Limits CPU 59% | GPU Limits CPU 68% | GPU Limits CPU 70% | GPU Limits CPU 77% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 543% above and your GPU is 261% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+543%vsrecommended
+261%vsrecommended
+420%vsminimum
+664%vsminimum
The Ryzen 7 7800X3D and GeForce RTX 5060 Laptop GPU will struggle to run Dead by Daylight at smooth framerates. At 1080p Ultra, you can expect around 44 FPS which is classified as "playable". Consider lowering settings or upgrading your hardware.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
For Dead by Daylight, upgrading the GPU would give you the most noticeable improvement. The GeForce RTX 5060 Laptop GPU is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Dead by Daylight does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Dead by Daylight requires at minimum a Core i3-4170 (CPU) and GeForce GTX 460 (GPU) with 8 GB RAM and 50 GB storage. For the recommended experience, you need a Core i3-4170 and GeForce GTX 760 with 8 GB RAM. Your Ryzen 7 7800X3D and GeForce RTX 5060 Laptop GPU both exceed the recommended specs, so you're well-positioned for a great experience.
These Dead by Daylight FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
