A heavy RE Engine title using advanced geometry and global illumination. It has sparked discussion by listing Frame Generation as a requirement for 60 FPS in its recommended specs. An SSD is mandatory.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 85 FPS. At 1440p, all settings exceed 62 FPS. At 4K, frame rates range from 46 to 86 FPS.
The GeForce RTX 5060 Ti is 16% above the recommended GPU (GeForce RTX 2070 Super) for Monster Hunter Wilds. The Ryzen 7 7800X3D is 76% above the recommended CPU (Core i5-11600K).
Monster Hunter Wilds supports: DLSS Frame Gen, FSR 3 Frame Gen, AFMF. The GeForce RTX 5060 Ti can use DLSS Frame Gen and FSR 3 Frame Gen, providing up to 2x-3x frame rate boost.
The GeForce RTX 5060 Ti sets the FPS ceiling at 1080p (medium/high/ultra), all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom. The FPS ceiling is closely matched at 1080p low.
Approximated average price on current market:
Combo price: $763. At 1080p Ultra, this combo delivers 85 FPS, equivalent to 0.11 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.198 fps/$ | 0.147 fps/$ | 0.125 fps/$ | 0.111 fps/$ |
| 1440p | 0.135 fps/$ | 0.104 fps/$ | 0.096 fps/$ | 0.081 fps/$ |
| 4k | 0.113 fps/$ | 0.088 fps/$ | 0.073 fps/$ | 0.060 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1440p ultra, the GeForce RTX 5060 Ti sets the ceiling at about 57 FPS, while the Ryzen 7 7800X3D has headroom up to 93 FPS. In this scenario, the GPU limits the CPU potential by 39% (FPS gap: 36 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your GeForce RTX 5060 Ti is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 6% | GPU Limits CPU 16% | GPU Limits CPU 11% | GPU Limits CPU 20% |
| 1440p (2K QHD) | GPU Limits CPU 24% | GPU Limits CPU 32% | GPU Limits CPU 29% | GPU Limits CPU 39% |
| 4K (Ultra HD) | GPU Limits CPU 11% | GPU Limits CPU 15% | GPU Limits CPU 25% | GPU Limits CPU 36% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 76% above and your GPU is 16% above the recommended specs. High/Ultra at 1080p. Lower settings for higher resolutions.
+76%vsrecommended
+16%vsrecommended
+94%vsminimum
+70%vsminimum
Yes, the Ryzen 7 7800X3D paired with the GeForce RTX 5060 Ti can run Monster Hunter Wilds smoothly up to 1440p achieving around 62 FPS at Ultra quality. Your GPU is 16% above the recommended specs, and your CPU is 76% above the recommended requirements.
This CPU + GPU combo costs approximately $763 ($384 CPU (Rank #212 Value) + $379 GPU (Rank #21 Value)). Your build is already very cost-efficient, but if you want even more FPS, the next good option is upgrading the GPU. For example, upgrading to the GeForce RTX 4070 Ti for around $799 (Rank #42 for value) could deliver noticeably better performance.
For Monster Hunter Wilds, upgrading the GPU would give you the most noticeable improvement. The GeForce RTX 5060 Ti is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p high, 1080p medium, 1080p ultra, 1440p high, 1440p low, 1440p medium, 1440p ultra, 4k high, 4k low, 4k medium, 4k ultra.
Yes! Monster Hunter Wilds supports DLSS Frame Gen and FSR 3 Frame Gen and AFMF, and your GeForce RTX 5060 Ti is compatible with DLSS Frame Gen and FSR 3 Frame Gen. With Frame Generation enabled, you can expect a 2x-3x FPS multiplier on top of native framerates, significantly boosting perceived smoothness.
Monster Hunter Wilds requires at minimum a Core i5-10600 (CPU) and GeForce GTX 1660 Super (GPU) with 16 GB RAM and 140 GB (SSD) storage. For the recommended experience, you need a Core i5-11600K and GeForce RTX 2070 Super with 16 GB RAM. Your Ryzen 7 7800X3D and GeForce RTX 5060 Ti both exceed the recommended specs, so you're well-positioned for a great experience.
These Monster Hunter Wilds FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
