A true test for system memory. Procedural maps can exhaust RAM quickly; 16GB is the minimum, and 32GB is recommended. CPUs with 3D V-Cache (AMD X3D) offer massive performance gains here.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 144 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 92 FPS. At 4K, frame rates range from 45 to 68 FPS.
The GeForce RTX 5060 Ti is 107% above the recommended GPU (GeForce GTX 980) for Rust. The Ryzen 7 7800X3D is 180% above the recommended CPU (Core i7-4790K).
The GeForce RTX 5060 Ti sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $763. At 1080p Ultra, this combo delivers 144 FPS, equivalent to 0.19 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.246 fps/$ | 0.249 fps/$ | 0.215 fps/$ | 0.189 fps/$ |
| 1440p | 0.176 fps/$ | 0.169 fps/$ | 0.149 fps/$ | 0.121 fps/$ |
| 4k | 0.089 fps/$ | 0.081 fps/$ | 0.075 fps/$ | 0.059 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k low, the GeForce RTX 5060 Ti sets the ceiling at about 65 FPS, while the Ryzen 7 7800X3D has headroom up to 144 FPS. In this scenario, the GPU limits the CPU potential by 55% (FPS gap: 79 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your GeForce RTX 5060 Ti is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 26% | GPU Limits CPU 26% | GPU Limits CPU 21% | GPU Limits CPU 22% |
| 1440p (2K QHD) | GPU Limits CPU 41% | GPU Limits CPU 41% | GPU Limits CPU 29% | GPU Limits CPU 32% |
| 4K (Ultra HD) | GPU Limits CPU 55% | GPU Limits CPU 52% | GPU Limits CPU 45% | GPU Limits CPU 48% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU11% - 34% <> GPU68% - 68% | CPU14% - 34% <> GPU66% - 68% <> | CPU12% - 31% <> GPU52% - 78% <> | CPU24% - 66% <> GPU50% - 77% <> |
| 1440p (2K QHD) | CPU11% - 34% <> GPU67% - 68% <> | CPU14% - 34% <> GPU66% - 67% <> | CPU13% - 32% <> GPU52% - 77% <> | CPU25% - 67% <> GPU50% - 76% <> |
| 4K (Ultra HD) | CPU10% - 34% <> GPU84% - 89% <> | CPU11% - 35% <> GPU84% - 88% <> | CPU10% - 33% <> GPU79% - 97% <> | CPU15% - 67% <> GPU79% - 97% <> |
The Ryzen 7 7800X3D + GeForce RTX 5060 Ti pairing runs this title with CPU utilization between 10% and 67% and GPU utilization between 50% and 97%. Ryzen 7 7800X3D keeps significant headroom across presets, while GeForce RTX 5060 Ti is utilized efficiently without persistent saturation. As resolution scales, average GPU load rises from 66% at 1080p to 87% at 4K, while CPU averages move from 28% to 27%.
The utilization pattern is relatively even. The GeForce RTX 5060 Ti reaches 88% average at its highest-load preset, while the Ryzen 7 7800X3D peaks at 46% average. This suggests a fairly controlled load distribution, but the actual FPS-limiting side should still be read from the limiter analysis above.
At 1080p, averages sit around CPU 28% and GPU 66%. At 1440p, that shifts to CPU 29% and GPU 65%, and at 4K it reaches CPU 27% and GPU 87%. This shows that GPU demand scales sharply with resolution while CPU load remains comparatively stable.
4K (Ultra HD) High is the most balanced preset based on this dataset. It runs around CPU 22% (10-33%) and GPU 88% (79-97%), which keeps GeForce RTX 5060 Ti well utilized without constant max-out behavior while Ryzen 7 7800X3D remains stable for consistent frame delivery.
Current utilization does not show an urgent upgrade requirement for either component; the Ryzen 7 7800X3D and GeForce RTX 5060 Ti remain reasonably matched for this title.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 180% above and your GPU is 107% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+180%vsrecommended
+107%vsrecommended
+236%vsminimum
+314%vsminimum
Yes, the Ryzen 7 7800X3D paired with the GeForce RTX 5060 Ti can run Rust smoothly up to 1440p achieving around 92 FPS at Ultra quality. Your GPU is 107% above the recommended specs, and your CPU is 180% above the recommended requirements.
This CPU + GPU combo costs approximately $763 ($384 CPU (Rank #212 Value) + $379 GPU (Rank #21 Value)). Your build is already very cost-efficient, but if you want even more FPS, the next good option is upgrading the GPU. For example, upgrading to the GeForce RTX 4070 Ti for around $799 (Rank #42 for value) could deliver noticeably better performance.
For Rust, upgrading the GPU would give you the most noticeable improvement. The GeForce RTX 5060 Ti is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Rust does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Rust requires at minimum a Core i7-3770 (CPU) and GeForce GTX 670 (GPU) with 10 GB RAM and 25 GB (SSD) storage. For the recommended experience, you need a Core i7-4790K and GeForce GTX 980 with 16 GB RAM. Your Ryzen 7 7800X3D and GeForce RTX 5060 Ti both exceed the recommended specs, so you're well-positioned for a great experience.
These Rust FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
