This 'Pokémon with guns' survival game runs on Unreal Engine. It is CPU-heavy due to AI simulation for the many creatures. Memory leaks can occur in long sessions, making 16GB of RAM a practical minimum.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 122 FPS. At 1440p, all settings exceed 103 FPS. At 4K, frame rates range from 42 to 77 FPS.
The GeForce RTX 5060 is 29% above the recommended GPU (GeForce RTX 2070) for Palworld. The Ryzen 7 7800X3D is 53% above the recommended CPU (Core i9-9900K).
Palworld supports: AFMF. This game does not have native DLSS 3 or FSR 3 Frame Generation support. AFMF is AMD-exclusive and not compatible with GeForce RTX 5060.
The GeForce RTX 5060 sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $683. At 1080p Ultra, this combo delivers 122 FPS, equivalent to 0.18 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.272 fps/$ | 0.239 fps/$ | 0.205 fps/$ | 0.179 fps/$ |
| 1440p | 0.201 fps/$ | 0.179 fps/$ | 0.170 fps/$ | 0.151 fps/$ |
| 4k | 0.113 fps/$ | 0.091 fps/$ | 0.081 fps/$ | 0.061 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k high, the GeForce RTX 5060 sets the ceiling at about 52 FPS, while the Ryzen 7 7800X3D has headroom up to 132 FPS. In this scenario, the GPU limits the CPU potential by 61% (FPS gap: 80 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your GeForce RTX 5060 is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 48% | GPU Limits CPU 47% | GPU Limits CPU 45% | GPU Limits CPU 48% |
| 1440p (2K QHD) | GPU Limits CPU 57% | GPU Limits CPU 58% | GPU Limits CPU 55% | GPU Limits CPU 56% |
| 4K (Ultra HD) | GPU Limits CPU 58% | GPU Limits CPU 60% | GPU Limits CPU 61% | GPU Limits CPU 60% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 53% above and your GPU is 29% above the recommended specs. High/Ultra at 1080p. Lower settings for higher resolutions.
+53%vsrecommended
+29%vsrecommended
+344%vsminimum
+314%vsminimum
Yes, the Ryzen 7 7800X3D paired with the GeForce RTX 5060 can run Palworld smoothly up to 1440p achieving around 103 FPS at Ultra quality. Your GPU is 29% above the recommended specs, and your CPU is 53% above the recommended requirements.
This CPU + GPU combo costs approximately $683 ($384 CPU (Rank #212 Value) + $299 GPU (Rank #2 Value)). Your build is already very cost-efficient, but if you want even more FPS, the next good option is upgrading the GPU. For example, upgrading to the GeForce RTX 4070 Ti for around $799 (Rank #42 for value) could deliver noticeably better performance.
For Palworld, upgrading the GPU would give you the most noticeable improvement. The GeForce RTX 5060 is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p high, 1080p low, 1080p medium, 1080p ultra, 1440p high, 1440p low, 1440p medium, 1440p ultra, 4k high, 4k low, 4k medium, 4k ultra.
Palworld currently only supports AFMF (AMD Fluid Motion Frames) for frame generation, which is an AMD-exclusive technology. Because you are using an NVIDIA GPU, you cannot use Frame Generation for this specific game. However, the game does support DLSS Upscaling and FSR Upscaling and XeSS, which you should enable to render at a lower resolution and use AI to significantly boost your FPS without losing visual quality.
Palworld requires at minimum a Core i5-3570K (CPU) and GeForce GTX 1050 (GPU) with 16 GB RAM and 40 GB (SSD) storage. For the recommended experience, you need a Core i9-9900K and GeForce RTX 2070 with 32 GB RAM. Your Ryzen 7 7800X3D and GeForce RTX 5060 both exceed the recommended specs, so you're well-positioned for a great experience.
These Palworld FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
