Returning to compete with Battlefield, Delta Force uses a modern engine featuring environmental destruction. While minimum requirements are accessible (GTX 960), competitive settings scale up to require GTX 10/RTX 20 series GPUs and 16GB of RAM for the best experience.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 191 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 156 FPS. At 4K, all settings exceed 90 FPS.
The GeForce RTX 5080 is 292% above the recommended GPU (GeForce GTX 1060 5GB) for Delta Force. The Ryzen 7 7800X3D is 278% above the recommended CPU (Core i5-6500).
At lower resolutions (1080p (low/medium)), the Ryzen 7 7800X3D sets the FPS ceiling. As graphical load increases at (1080p ultra, 1440p (medium/high/ultra), all 4k settings), the GeForce RTX 5080 becomes the FPS-limiting side. The FPS ceiling is closely matched at 1080p high, 1440p low.
Approximated average price on current market:
Combo price: $1634. At 1080p Ultra, this combo delivers 191 FPS, equivalent to 0.12 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.145 fps/$ | 0.135 fps/$ | 0.125 fps/$ | 0.117 fps/$ |
| 1440p | 0.124 fps/$ | 0.120 fps/$ | 0.110 fps/$ | 0.095 fps/$ |
| 4k | 0.084 fps/$ | 0.083 fps/$ | 0.072 fps/$ | 0.055 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1440p ultra, the GeForce RTX 5080 sets the ceiling at about 146 FPS, while the Ryzen 7 7800X3D has headroom up to 179 FPS. In this scenario, the GPU limits the CPU potential by 18% (FPS gap: 33 FPS). Overall distribution: GPU limits 8/12 cells, CPU limits 2/12, balanced 2/12.
Your GeForce RTX 5080 is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 11% | CPU Limits GPU 8% | Balanced | GPU Limits CPU 10% |
| 1440p (2K QHD) | Balanced | GPU Limits CPU 7% | GPU Limits CPU 12% | GPU Limits CPU 18% |
| 4K (Ultra HD) | GPU Limits CPU 10% | GPU Limits CPU 14% | GPU Limits CPU 15% | GPU Limits CPU 18% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU68% - 82% <> GPU58% - 75% <> | CPU68% - 82% <> GPU58% - 75% <> | CPU65% - 84% <> GPU60% - 78% <> | CPU65% - 84% <> GPU60% - 78% <> |
| 1440p (2K QHD) | CPU28% - 40% <> GPU93% - 97% <> | CPU28% - 40% <> GPU93% - 97% <> | CPU25% - 41% <> GPU95% - 100% <> | CPU25% - 41% <> GPU95% - 100% <> |
| 4K (Ultra HD) | CPU24% - 25% <> GPU95% - 97% <> | CPU24% - 25% <> GPU95% - 97% <> | CPU20% - 26% <> GPU98% - 100% <> | CPU20% - 25% <> GPU98% - 100% <> |
The Ryzen 7 7800X3D + GeForce RTX 5080 pairing runs this title with CPU utilization between 20% and 84% and GPU utilization between 58% and 100%. Ryzen 7 7800X3D stays in a controlled operating range, while GeForce RTX 5080 carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 68% at 1080p to 98% at 4K, while CPU averages move from 75% to 23%.
From a utilization perspective, this is a GPU-heavy load profile. At 4K (Ultra HD) High, the GeForce RTX 5080 averages 99% usage (98-100%), while the Ryzen 7 7800X3D stays at 23% (20-26%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.
At 1080p, averages sit around CPU 75% and GPU 68%. At 1440p, that shifts to CPU 34% and GPU 97%, and at 4K it reaches CPU 23% and GPU 98%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
1440p (2K QHD) Low is the most balanced preset based on this dataset. It runs around CPU 34% (28-40%) and GPU 95% (93-97%), which keeps GeForce RTX 5080 well utilized without constant max-out behavior while Ryzen 7 7800X3D remains stable for consistent frame delivery.
Current utilization does not show an urgent upgrade requirement for either component; the Ryzen 7 7800X3D and GeForce RTX 5080 remain reasonably matched for this title.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 278% above and your GPU is 292% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+278%vsrecommended
+292%vsrecommended
+729%vsminimum
+486%vsminimum
Yes, the Ryzen 7 7800X3D paired with the GeForce RTX 5080 can run Delta Force smoothly up to 4k achieving around 90 FPS at Ultra quality. Your GPU is 292% above the recommended specs, and your CPU is 278% above the recommended requirements.
This CPU + GPU combo costs approximately $1634 ($384 CPU (Rank #212 Value) + $1250 GPU (Rank #74 Value)). Your GeForce RTX 5080 provides phenomenal top-tier performance but at a premium enthusiast price. Since you are essentially at the ceiling of current hardware capabilities, there are no meaningful performance upgrades available. However, if you wanted a more cost-effective build that still delivers a great experience, you could theoretically step down to a high-end card with a significantly better value rating.
Your GeForce RTX 5080 is already a top-tier graphics card. While it's technically the limiting factor here (which means you are fully utilizing your GPU's visual horsepower exactly as intended), there is no meaningful upgrade path that would drastically improve your Delta Force performance right now. GPU fully utilized at: 1080p ultra, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra. CPU-limited at: 1080p low, 1080p medium.
Delta Force does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Delta Force requires at minimum a Core i3-4150 (CPU) and GeForce GTX 960 (GPU) with 12 GB RAM and 50 GB storage. For the recommended experience, you need a Core i5-6500 and GeForce GTX 1060 5GB with 16 GB RAM. Your Ryzen 7 7800X3D and GeForce RTX 5080 both exceed the recommended specs, so you're well-positioned for a great experience.
These Delta Force FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
