This extraction shooter bets on visual fidelity with UE5 and DX12, requiring AVX2 support. It uses volumetric lighting and dense effects, with a recommended baseline of RTX 2070 / RX 5700 XT, indicating it is a demanding title.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 170 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 177 FPS. At 4K, all settings exceed 129 FPS.
The GeForce RTX 5090 D is 154% above the recommended GPU (GeForce RTX 2070) for ARC Raiders. The Ryzen 7 7800X3D is 94% above the recommended CPU (Core i5-9600K).
ARC Raiders supports: DLSS Frame Gen, FSR 3 Frame Gen, AFMF. The GeForce RTX 5090 D can use DLSS Frame Gen and FSR 3 Frame Gen, providing up to 2x-3x frame rate boost.
At lower resolutions (all 1080p settings), the Ryzen 7 7800X3D sets the FPS ceiling. As graphical load increases at (1440p medium, 4k (low/medium)), the GeForce RTX 5090 D becomes the FPS-limiting side. The FPS ceiling is closely matched at 1440p (low/high/ultra), 4k (high/ultra).
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1080p high, the Ryzen 7 7800X3D sets the ceiling at about 209 FPS, while the GeForce RTX 5090 D could reach 242 FPS. In this scenario, the CPU limits the GPU potential by 14% (FPS gap: 33 FPS). Overall distribution: CPU limits 4/12 cells, GPU limits 5/12, balanced 3/12.
The Ryzen 7 7800X3D and GeForce RTX 5090 D stay close in effective frame-generation ceiling across most presets, so neither side consistently suppresses the other by a large margin.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 12% | CPU Limits GPU 11% | CPU Limits GPU 14% | CPU Limits GPU 13% |
| 1440p (2K QHD) | Balanced | GPU Limits CPU 8% | GPU Limits CPU 6% | Balanced |
| 4K (Ultra HD) | GPU Limits CPU 7% | GPU Limits CPU 10% | GPU Limits CPU 6% | Balanced |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 94% above and your GPU is 154% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+94%vsrecommended
+154%vsrecommended
+180%vsminimum
+367%vsminimum
Yes, the Ryzen 7 7800X3D paired with the GeForce RTX 5090 D can run ARC Raiders smoothly up to 4k achieving around 129 FPS at Ultra quality. Your GPU is 154% above the recommended specs, and your CPU is 94% above the recommended requirements.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
For ARC Raiders, upgrading the CPU would have the biggest impact on performance. The Ryzen 7 7800X3D is currently the limiting factor — the GeForce RTX 5090 D has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p high, 1080p low, 1080p medium, 1080p ultra. GPU fully utilized at: 1440p medium, 4k low, 4k medium.
Yes! ARC Raiders supports DLSS Frame Gen and FSR 3 Frame Gen and AFMF, and your GeForce RTX 5090 D is compatible with DLSS Frame Gen and FSR 3 Frame Gen. With Frame Generation enabled, you can expect a 2x-3x FPS multiplier on top of native framerates, significantly boosting perceived smoothness.
ARC Raiders requires at minimum a Core i5-6600K (CPU) and GeForce GTX 1050 Ti (GPU) with 12 GB RAM and 35 GB storage. For the recommended experience, you need a Core i5-9600K and GeForce RTX 2070 with 16 GB RAM. Your Ryzen 7 7800X3D and GeForce RTX 5090 D both exceed the recommended specs, so you're well-positioned for a great experience.
These ARC Raiders FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
