An asymmetrical horror game locked at 60 FPS. It is generally GPU-limited at high settings but runs on most mid-range hardware.
This game has a built-in FPS cap of 60 FPS
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, frame rates range from 20 to 61 FPS depending on quality settings. At 1440p, frame rates range from 15 to 46 FPS. At 4K, frame rates range from 4 to 15 FPS.
The Quadro 5000M is 9% below minimum GPU requirement for Dead by Daylight. The Ryzen 7 7800X3D is 543% above the recommended CPU (Core i3-4170).
The Quadro 5000M sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k ultra, the Quadro 5000M sets the ceiling at about 4 FPS, while the Ryzen 7 7800X3D has headroom up to 117 FPS. In this scenario, the GPU limits the CPU potential by 97% (FPS gap: 113 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your Quadro 5000M is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 74% | GPU Limits CPU 81% | GPU Limits CPU 87% | GPU Limits CPU 92% |
| 1440p (2K QHD) | GPU Limits CPU 64% | GPU Limits CPU 74% | GPU Limits CPU 83% | GPU Limits CPU 91% |
| 4K (Ultra HD) | GPU Limits CPU 88% | GPU Limits CPU 91% | GPU Limits CPU 95% | GPU Limits CPU 97% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU28% - 39% <> GPU50% - 69% <> | CPU28% - 39% <> GPU50% - 69% <> | CPU30% - 45% <> GPU70% - 85% <> | CPU19% - 32% <> GPU73% - 84% <> |
| 1440p (2K QHD) | CPU19% - 38% <> GPU50% - 82% <> | CPU19% - 38% <> GPU50% - 82% <> | CPU21% - 38% <> GPU70% - 98% <> | CPU10% - 25% <> GPU72% - 97% <> |
| 4K (Ultra HD) | CPU20% - 38% <> GPU50% - 82% <> | CPU20% - 38% <> GPU50% - 82% <> | CPU21% - 38% <> GPU70% - 97% <> | CPU9% - 25% <> GPU74% - 96% <> |
The Ryzen 7 7800X3D + Quadro 5000M pairing runs this title with CPU utilization between 9% and 45% and GPU utilization between 50% and 98%. Ryzen 7 7800X3D keeps significant headroom across presets, while Quadro 5000M is utilized efficiently without persistent saturation. As resolution scales, average GPU load rises from 69% at 1080p to 75% at 4K, while CPU averages move from 33% to 26%.
The utilization pattern is relatively even. The Quadro 5000M reaches 85% average at its highest-load preset, while the Ryzen 7 7800X3D peaks at 38% average. This suggests a fairly controlled load distribution, but the actual FPS-limiting side should still be read from the limiter analysis above.
At 1080p, averages sit around CPU 33% and GPU 69%. At 1440p, that shifts to CPU 26% and GPU 75%, and at 4K it reaches CPU 26% and GPU 75%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
4K (Ultra HD) Ultra is the most balanced preset based on this dataset. It runs around CPU 17% (9-25%) and GPU 85% (74-96%), which keeps Quadro 5000M well utilized without constant max-out behavior while Ryzen 7 7800X3D remains stable for consistent frame delivery.
Current utilization does not show an urgent upgrade requirement for either component; the Ryzen 7 7800X3D and Quadro 5000M remain reasonably matched for this title.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your hardware is below minimum requirements. GPU is the limiting factor (9% below minimum). Expect performance issues. Low settings recommended.
+543%vsrecommended
-57%vsrecommended
+420%vsminimum
-9%vsminimum
The Ryzen 7 7800X3D and Quadro 5000M will struggle to run Dead by Daylight at smooth framerates. At 1080p Ultra, you can expect around 20 FPS which is classified as "struggling". Consider lowering settings or upgrading your hardware.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
For Dead by Daylight, upgrading the GPU would give you the most noticeable improvement. The Quadro 5000M is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Dead by Daylight does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Dead by Daylight requires at minimum a Core i3-4170 (CPU) and GeForce GTX 460 (GPU) with 8 GB RAM and 50 GB storage. For the recommended experience, you need a Core i3-4170 and GeForce GTX 760 with 8 GB RAM. Your hardware falls below the minimum requirements for this game, which may result in poor performance.
These Dead by Daylight FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
