Unlike shooters, Naraka focuses on melee combat with fluid animations. The game is visually dense and supports DLSS, which is vital for high frame rates at resolutions above 1080p. An SSD is critical for map loading, and 16GB of RAM is recommended for smooth gameplay.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, frame rates range from 58 to 141 FPS depending on quality settings. At 1440p, frame rates range from 53 to 116 FPS. At 4K, frame rates range from 39 to 69 FPS.
The Quadro M5000 is 7% below recommended, but 141% above minimum for Naraka: Bladepoint. The Ryzen 7 7800X3D is 161% above the recommended CPU (Core i7-7700).
The Quadro M5000 determines the performance ceiling at all 1080p settings, all 1440p settings, all 4k settings, executing at maximum capacity.
Approximated average price on current market:
Combo price: $504. At 1080p Ultra, this combo delivers 58 FPS, equivalent to 0.12 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.280 fps/$ | 0.208 fps/$ | 0.155 fps/$ | 0.115 fps/$ |
| 1440p | 0.230 fps/$ | 0.183 fps/$ | 0.141 fps/$ | 0.105 fps/$ |
| 4k | 0.137 fps/$ | 0.121 fps/$ | 0.095 fps/$ | 0.077 fps/$ |
* Table values represent FPS per Dollar (higher is better)
At 4k ultra, the Quadro M5000 sets the ceiling at about 43 FPS, while the Ryzen 7 7800X3D has headroom up to 115 FPS. In this scenario, the GPU limits the CPU potential by 63% (FPS gap: 72 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your Quadro M5000 is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 27% | GPU Limits CPU 23% | GPU Limits CPU 26% | GPU Limits CPU 45% |
| 1440p (2K QHD) | GPU Limits CPU 39% | GPU Limits CPU 35% | GPU Limits CPU 38% | GPU Limits CPU 53% |
| 4K (Ultra HD) | GPU Limits CPU 56% | GPU Limits CPU 56% | GPU Limits CPU 57% | GPU Limits CPU 63% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 161% below recommended and your GPU is 7% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
+161%vsrecommended
-7%vsrecommended
+598%vsminimum
+141%vsminimum
The Ryzen 7 7800X3D and Quadro M5000 will struggle to run Naraka: Bladepoint at smooth framerates. At 1080p Ultra, you can expect around 58 FPS which is classified as "playable". Consider lowering settings or upgrading your hardware.
This CPU + GPU combo costs approximately $504 ($384 CPU (Rank #212 Value) + $120 GPU). Since the GPU is the main limiting factor, investing in a stronger GPU will improve your framerates and overall value. For example, upgrading to the RTX 2000 Ada Generation Embedded GPU (Rank #6 for value) could deliver noticeably better performance.
For Naraka: Bladepoint, upgrading the GPU would give you the most noticeable improvement. The Quadro M5000 is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Naraka: Bladepoint does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Naraka: Bladepoint requires at minimum a Core i5-4460 (CPU) and GeForce GTX 750 Ti (GPU) with 8 GB RAM and 20 GB storage. For the recommended experience, you need a Core i7-7700 and GeForce GTX 1060 with 16 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Naraka: Bladepoint FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
