Built on a modified Source engine, Apex Legends retains the scalability of Titanfall 2. Fast movement demands high frame rates for fluidity. VRAM can be a bottleneck if the 'Texture Streaming Budget' is set too high. While it handles 8GB of RAM better than some competitors, 16GB is recommended. It is generally less CPU-intensive than Warzone, allowing older quad-core CPUs to remain viable.
This game has a built-in FPS cap of 300 FPS
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 192 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 158 FPS. At 4K, all settings exceed 90 FPS.
The Quadro P5200 is 21% above the recommended GPU (GeForce GTX 970) for Apex Legends. The Ryzen 7 7800X3D is 278% above the recommended CPU (Core i5-3570K).
The Quadro P5200 sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $624. At 1080p Ultra, this combo delivers 192 FPS, equivalent to 0.31 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.394 fps/$ | 0.359 fps/$ | 0.329 fps/$ | 0.308 fps/$ |
| 1440p | 0.314 fps/$ | 0.290 fps/$ | 0.282 fps/$ | 0.253 fps/$ |
| 4k | 0.213 fps/$ | 0.176 fps/$ | 0.179 fps/$ | 0.144 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1440p ultra, the Quadro P5200 sets the ceiling at about 127 FPS, while the Ryzen 7 7800X3D has headroom up to 335 FPS. In this scenario, the GPU limits the CPU potential by 62% (FPS gap: 208 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your Quadro P5200 is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 32% | GPU Limits CPU 40% | GPU Limits CPU 44% | GPU Limits CPU 46% |
| 1440p (2K QHD) | GPU Limits CPU 51% | GPU Limits CPU 57% | GPU Limits CPU 58% | GPU Limits CPU 62% |
| 4K (Ultra HD) | GPU Limits CPU 55% | GPU Limits CPU 60% | GPU Limits CPU 57% | GPU Limits CPU 61% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU16% - 33% <> GPU82% - 94% <> | CPU17% - 33% <> GPU93% - 100% <> | CPU19% - 35% <> GPU92% - 100% <> | CPU18% - 34% <> GPU93% - 100% <> |
| 1440p (2K QHD) | CPU16% - 31% <> GPU84% - 95% <> | CPU16% - 31% <> GPU96% - 100% <> | CPU18% - 32% <> GPU96% - 100% <> | CPU18% - 31% <> GPU95% - 100% <> |
| 4K (Ultra HD) | CPU15% - 31% <> GPU84% - 95% <> | CPU15% - 31% <> GPU97% - 100% <> | CPU17% - 32% <> GPU96% - 100% <> | CPU17% - 32% <> GPU96% - 100% <> |
The Ryzen 7 7800X3D + Quadro P5200 pairing runs this title with CPU utilization between 15% and 35% and GPU utilization between 82% and 100%. Ryzen 7 7800X3D keeps significant headroom across presets, while Quadro P5200 carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 94% at 1080p to 96% at 4K, while CPU averages move from 26% to 24%.
From a utilization perspective, this is a GPU-heavy load profile. At 1440p (2K QHD) Medium, the Quadro P5200 averages 98% usage (96-100%), while the Ryzen 7 7800X3D stays at 24% (16-31%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.
At 1080p, averages sit around CPU 26% and GPU 94%. At 1440p, that shifts to CPU 24% and GPU 96%, and at 4K it reaches CPU 24% and GPU 96%. This shows that workload scaling is limited, which can indicate engine-side constraints.
1080p (Full HD) Low is the most balanced preset based on this dataset. It runs around CPU 24% (16-33%) and GPU 88% (82-94%), which keeps Quadro P5200 well utilized without constant max-out behavior while Ryzen 7 7800X3D remains stable for consistent frame delivery.
Upgrade priority should be the GPU. The Quadro P5200 reaches 98% average load at 1440p (2K QHD) Medium while the Ryzen 7 7800X3D still has headroom, so a faster graphics card would deliver the largest uplift.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 278% above and your GPU is 21% above the recommended specs. High/Ultra at 1080p. Lower settings for higher resolutions.
+278%vsrecommended
+21%vsrecommended
+692%vsminimum
+897%vsminimum
Yes, the Ryzen 7 7800X3D paired with the Quadro P5200 can run Apex Legends smoothly up to 4k achieving around 90 FPS at Ultra quality. Your GPU is 21% above the recommended specs, and your CPU is 278% above the recommended requirements.
This CPU + GPU combo costs approximately $624 ($384 CPU (Rank #212 Value) + $240 GPU (Rank #28 Value)). Your build is already very cost-efficient, but if you want even more FPS, the next good option is upgrading the GPU. For example, upgrading to the Quadro RTX 4000 (móvel) for around $900 (Rank #11 for value) could deliver noticeably better performance.
For Apex Legends, upgrading the GPU would give you the most noticeable improvement. The Quadro P5200 is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Apex Legends does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Apex Legends requires at minimum a Core i3-6300 (CPU) and GeForce GT 640 (GPU) with 6 GB RAM and 56 GB storage. For the recommended experience, you need a Core i5-3570K and GeForce GTX 970 with 8 GB RAM. Your Ryzen 7 7800X3D and Quadro P5200 both exceed the recommended specs, so you're well-positioned for a great experience.
These Apex Legends FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
