Cyberpunk 2077FPS onRyzen 7 7800X3D&Quadro RTX 6000

Cyberpunk 2077

The benchmark for modern graphical fidelity. Update 2.0 and Phantom Liberty raised the requirements, making an SSD mandatory. The dense city and NPC AI require strong multi-thread CPU performance. Path Tracing ('Overdrive Mode') is a feature reserved for high-end RTX 40 series cards with Frame Generation.

Cyberpunk 2077 - FPS Estimates by Resolution

Actual FPS may vary based on RAM speed, background processes, and other system factors

1080P
low159 FPS
medium143 FPS
high117 FPS
ultra100 FPS
1440P
low95 FPS
medium84 FPS
high75 FPS
ultra67 FPS
4K
low57 FPS
medium49 FPS
high42 FPS
ultra34 FPS

Performance Report

Cyberpunk 2077

Quadro RTX 6000 + Ryzen 7 7800X3D
🎮Visual Experience

At 1080p, all quality settings exceed 100 FPS. At 1440p, all settings exceed 67 FPS. At 4K, frame rates range from 34 to 57 FPS.

Official Requirements

The Quadro RTX 6000 is 9% above the recommended GPU (GeForce RTX 2060 Super) for Cyberpunk 2077. The Ryzen 7 7800X3D is 0% above the recommended CPU (Core i7-12700).

⚙️FPS Ceiling Analysis

The Quadro RTX 6000 sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.

💰Value Analysis

Approximated average price on current market:

Quadro RTX 6000:$1800(updated 2/10/2026)
Official Launch Price: $6300
Ryzen 7 7800X3D:$384(updated 2/6/2026)
Official Launch Price: $449

Combo price: $2184. At 1080p Ultra, this combo delivers 100 FPS, equivalent to 0.05 FPS per dollar.

ResolutionLowMediumHighUltra
1080p0.073 fps/$0.065 fps/$0.054 fps/$0.046 fps/$
1440p0.043 fps/$0.038 fps/$0.034 fps/$0.031 fps/$
4k0.026 fps/$0.022 fps/$0.019 fps/$0.016 fps/$

* Table values represent FPS per Dollar (higher is better)

Performance Limiter Analysis

Ryzen 7 7800X3D|Quadro RTX 6000

This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.

📈Analysis

At 4k medium, the Quadro RTX 6000 sets the ceiling at about 52 FPS, while the Ryzen 7 7800X3D has headroom up to 130 FPS. In this scenario, the GPU limits the CPU potential by 60% (FPS gap: 78 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.

Verdict

GPU Limits CPU

Your Quadro RTX 6000 is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.

🧩Detailed Breakdown
1080p (Full HD)
LowGPU Limits CPU 43%
MediumGPU Limits CPU 44%
HighGPU Limits CPU 46%
UltraGPU Limits CPU 43%
1440p (2K QHD)
LowGPU Limits CPU 56%
MediumGPU Limits CPU 55%
HighGPU Limits CPU 54%
UltraGPU Limits CPU 47%
4K (Ultra HD)
LowGPU Limits CPU 57%
MediumGPU Limits CPU 60%
HighGPU Limits CPU 55%
UltraGPU Limits CPU 50%
Percentages show how much potential FPS of the stronger component is lost because the other component has a lower FPS ceiling.
🧠Methodology

We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.

Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.

CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.

A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.

📊Predicted Hardware Utilization for Ryzen 7 7800X3D and Quadro RTX 6000

1080p (Full HD)

Low
CPU42% - 64%
<>
GPU59% - 81%
<>
Medium
CPU50% - 67%
<>
GPU78% - 93%
<>
High
CPU44% - 65%
<>
GPU80% - 97%
<>
Ultra
CPU40% - 57%
<>
GPU81% - 98%
<>

1440p (2K QHD)

Low
CPU42% - 62%
<>
GPU95% - 98%
<>
Medium
CPU44% - 61%
<>
GPU100% - 100%
High
CPU38% - 59%
<>
GPU99% - 100%
<>
Ultra
CPU27% - 51%
<>
GPU98% - 100%
<>

4K (Ultra HD)

Low
CPU37% - 48%
<>
GPU99% - 100%
<>
Medium
CPU38% - 49%
<>
GPU100% - 100%
High
CPU32% - 48%
<>
GPU100% - 100%
Ultra
CPU22% - 39%
<>
GPU100% - 100%

Performance Summary

The Ryzen 7 7800X3D + Quadro RTX 6000 pairing runs this title with CPU utilization between 22% and 67% and GPU utilization between 59% and 100%. Ryzen 7 7800X3D keeps significant headroom across presets, while Quadro RTX 6000 carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 84% at 1080p to 100% at 4K, while CPU averages move from 53% to 39%.

Load Interpretation

From a utilization perspective, this is a GPU-heavy load profile. At 1440p (2K QHD) Medium, the Quadro RTX 6000 averages 100% usage (100-100%), while the Ryzen 7 7800X3D stays at 52% (44-61%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.

Resolution Scaling

At 1080p, averages sit around CPU 53% and GPU 84%. At 1440p, that shifts to CPU 48% and GPU 99%, and at 4K it reaches CPU 39% and GPU 100%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.

Optimal Settings Recommendation

1080p (Full HD) High is the most balanced preset based on this dataset. It runs around CPU 54% (44-65%) and GPU 88% (80-97%), which keeps Quadro RTX 6000 well utilized without constant max-out behavior while Ryzen 7 7800X3D remains stable for consistent frame delivery.

Upgrade Insight

Upgrade priority should be the GPU. The Quadro RTX 6000 reaches 100% average load at 1440p (2K QHD) Medium while the Ryzen 7 7800X3D still has headroom, so a faster graphics card would deliver the largest uplift.

Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.

Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.

  • High GPU Load: You typically want to see High GPU Utilization (90%+) and moderate CPU usage when visual settings are heavy. This indicates the graphics pipeline is under strong load, but the exact FPS limiter should still be confirmed by the FPS ceiling analysis.
  • High CPU Load: If you see High CPU Utilization (85%+) paired with lower GPU utilization, the processor is handling a disproportionate share of frame preparation and game logic. That can point to CPU-side pressure, but it should not be treated as a direct replacement for FPS ceiling analysis.
  • Low CPU and GPU Load: If both CPU and GPU utilization are relatively low, it means the hardware is waiting on something else. This could be a game engine limitation, poorly optimized code, or an artificial framerate cap like VSync holding performance back. It does not mean both parts are equally fast in FPS terms.

Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.

Cyberpunk 2077 Requirements Comparison

See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.

CPU - Ryzen 7 7800X3D
cpu icon
34,293
Your Score
MinimumCore i7-6700
RecommendedCore i7-12700
GPU - Quadro RTX 6000
gpu icon
17,887
Your Score
MinimumGeForce GTX 1060
RecommendedGeForce RTX 2060 Super

Your CPU is 0% above and your GPU is 9% above the recommended specs. High/Ultra at 1080p. Lower settings for higher resolutions.

CPU

+0%vsrecommended

GPU

+9%vsrecommended

CPU

+180%vsminimum

GPU

+78%vsminimum

Minimum Requirements
Video Card: GeForce GTX 1060
Processor: Core i7-6700
Memory: 12 GB
Disk Space: 70 GB (SSD)
System: Windows 10 64-bit
Recommended Requirements
Processor: Core i7-12700
Memory: 16 GB
Disk Space: 70 GB (NVMe SSD)
System: Windows 10 64-bit

Frequently Asked Questions

1Can the Ryzen 7 7800X3D and Quadro RTX 6000 run Cyberpunk 2077 well?

Yes, the Ryzen 7 7800X3D paired with the Quadro RTX 6000 can run Cyberpunk 2077 smoothly up to 1440p achieving around 67 FPS at Ultra quality. Your GPU is 9% above the recommended specs, and your CPU is 0% below the recommended requirements.

2Is there a more cost-effective setup to run Cyberpunk 2077?

This CPU + GPU combo costs approximately $2184 ($384 CPU (Rank #212 Value) + $1800 GPU (Rank #105 Value)). Since the GPU is the main limiting factor, investing in a stronger GPU will improve your framerates and overall value. For example, upgrading to the RTX PRO 4500 Blackwell for around $2399 (Rank #51 for value) could deliver noticeably better performance.

3Which component should I upgrade first to improve Cyberpunk 2077 performance?

For Cyberpunk 2077, upgrading the GPU would give you the most noticeable improvement. The Quadro RTX 6000 is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.

4Does this setup support Frame Generation for Cyberpunk 2077?

Cyberpunk 2077 does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.

5What are the minimum and recommended specs for Cyberpunk 2077?

Cyberpunk 2077 requires at minimum a Core i7-6700 (CPU) and GeForce GTX 1060 (GPU) with 12 GB RAM and 70 GB (SSD) storage. For the recommended experience, you need a Core i7-12700 and GeForce RTX 2060 Super with 16 GB RAM. Your Ryzen 7 7800X3D and Quadro RTX 6000 both exceed the recommended specs, so you're well-positioned for a great experience.

6How accurate are these Cyberpunk 2077 FPS estimates for the Ryzen 7 7800X3D and Quadro RTX 6000?

These Cyberpunk 2077 FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.

Performance estimates are based on synthetic benchmarks and hardware capabilities.

Results may vary based on drivers, OS, and background processes.