A masterpiece of the RAGE engine, heavily taxing the GPU with volumetric lighting and water physics. Interestingly, it has relatively low CPU utilization compared to its graphical demands. Be prepared for a massive 150GB install size.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, frame rates range from 14 to 28 FPS depending on quality settings. At 1440p, frame rates range from 13 to 19 FPS. At 4K, frame rates range from 8 to 13 FPS.
The Quadro is 16% below minimum GPU requirement for Red Dead Redemption 2. The Ryzen 7 7800X3D is 278% above the recommended CPU (Core i7-4770K).
The Quadro sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $434. At 1080p Ultra, this combo delivers 14 FPS, equivalent to 0.03 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.065 fps/$ | 0.053 fps/$ | 0.041 fps/$ | 0.032 fps/$ |
| 1440p | 0.044 fps/$ | 0.037 fps/$ | 0.037 fps/$ | 0.030 fps/$ |
| 4k | 0.030 fps/$ | 0.023 fps/$ | 0.021 fps/$ | 0.018 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1440p ultra, the Quadro sets the ceiling at about 14 FPS, while the Ryzen 7 7800X3D has headroom up to 122 FPS. In this scenario, the GPU limits the CPU potential by 89% (FPS gap: 108 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your Quadro is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 85% | GPU Limits CPU 86% | GPU Limits CPU 86% | GPU Limits CPU 88% |
| 1440p (2K QHD) | GPU Limits CPU 87% | GPU Limits CPU 88% | GPU Limits CPU 87% | GPU Limits CPU 89% |
| 4K (Ultra HD) | GPU Limits CPU 88% | GPU Limits CPU 89% | GPU Limits CPU 89% | GPU Limits CPU 88% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU25% - 53% <> GPU89% - 95% <> | CPU27% - 53% <> GPU93% - 96% <> | CPU29% - 55% <> GPU93% - 96% <> | CPU29% - 48% <> GPU99% - 100% <> |
| 1440p (2K QHD) | CPU16% - 31% <> GPU98% - 99% <> | CPU17% - 29% <> GPU99% - 100% <> | CPU15% - 26% <> GPU99% - 100% <> | CPU14% - 21% <> GPU100% - 100% |
| 4K (Ultra HD) | CPU11% - 15% <> GPU99% - 100% <> | CPU11% - 12% <> GPU100% - 100% | CPU10% - 11% <> GPU100% - 100% | CPU10% - 10% GPU100% - 100% |
The Ryzen 7 7800X3D + Quadro pairing runs this title with CPU utilization between 10% and 55% and GPU utilization between 89% and 100%. Ryzen 7 7800X3D keeps significant headroom across presets, while Quadro carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 95% at 1080p to 100% at 4K, while CPU averages move from 40% to 11%.
From a utilization perspective, this is a GPU-heavy load profile. At 1080p (Full HD) Ultra, the Quadro averages 100% usage (99-100%), while the Ryzen 7 7800X3D stays at 38% (29-48%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.
At 1080p, averages sit around CPU 40% and GPU 95%. At 1440p, that shifts to CPU 21% and GPU 100%, and at 4K it reaches CPU 11% and GPU 100%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
1080p (Full HD) Low is the most balanced preset based on this dataset. It runs around CPU 39% (25-53%) and GPU 92% (89-95%), which keeps Quadro well utilized without constant max-out behavior while Ryzen 7 7800X3D remains stable for consistent frame delivery.
Upgrade priority should be the GPU. The Quadro reaches 100% average load at 1080p (Full HD) Ultra while the Ryzen 7 7800X3D still has headroom, so a faster graphics card would deliver the largest uplift.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your hardware is below minimum requirements. GPU is the limiting factor (16% below minimum). Expect performance issues. Low settings recommended.
+278%vsrecommended
-50%vsrecommended
+728%vsminimum
-16%vsminimum
The Ryzen 7 7800X3D and Quadro will struggle to run Red Dead Redemption 2 at smooth framerates. At 1080p Ultra, you can expect around 14 FPS which is classified as "struggling". Consider lowering settings or upgrading your hardware.
This CPU + GPU combo costs approximately $434 ($384 CPU (Rank #212 Value) + $50 GPU). Since the GPU is the main limiting factor, investing in a stronger GPU will improve your framerates and overall value. For example, upgrading to the RTX 2000 Ada Generation Embedded GPU (Rank #6 for value) could deliver noticeably better performance.
For Red Dead Redemption 2, upgrading the GPU would give you the most noticeable improvement. The Quadro is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Red Dead Redemption 2 does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Red Dead Redemption 2 requires at minimum a Core i5-2500K (CPU) and GeForce GTX 770 (GPU) with 8 GB RAM and 150 GB storage. For the recommended experience, you need a Core i7-4770K and GeForce GTX 1060 with 12 GB RAM. Your hardware falls below the minimum requirements for this game, which may result in poor performance.
These Red Dead Redemption 2 FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
