This 'Pokémon with guns' survival game runs on Unreal Engine. It is CPU-heavy due to AI simulation for the many creatures. Memory leaks can occur in long sessions, making 16GB of RAM a practical minimum.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, frame rates range from 8 to 15 FPS depending on quality settings. At 1440p, frame rates range from 6 to 11 FPS. At 4K, frame rates range from 4 to 8 FPS.
The Radeon HD 8450G is 93% below minimum GPU requirement for Palworld. The Ryzen 7 7800X3D is 53% above the recommended CPU (Core i9-9900K).
The Radeon HD 8450G sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $434. At 1080p Ultra, this combo delivers 8 FPS, equivalent to 0.02 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.035 fps/$ | 0.028 fps/$ | 0.023 fps/$ | 0.018 fps/$ |
| 1440p | 0.025 fps/$ | 0.021 fps/$ | 0.018 fps/$ | 0.014 fps/$ |
| 4k | 0.018 fps/$ | 0.014 fps/$ | 0.012 fps/$ | 0.009 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1440p ultra, the Radeon HD 8450G sets the ceiling at about 6 FPS, while the Ryzen 7 7800X3D has headroom up to 94 FPS. In this scenario, the GPU limits the CPU potential by 94% (FPS gap: 88 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your Radeon HD 8450G is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 92% | GPU Limits CPU 92% | GPU Limits CPU 92% | GPU Limits CPU 93% |
| 1440p (2K QHD) | GPU Limits CPU 93% | GPU Limits CPU 93% | GPU Limits CPU 93% | GPU Limits CPU 94% |
| 4K (Ultra HD) | GPU Limits CPU 92% | GPU Limits CPU 94% | GPU Limits CPU 94% | GPU Limits CPU 93% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your hardware is below minimum requirements. GPU is the limiting factor (93% below minimum). Expect performance issues. Low settings recommended.
+53%vsrecommended
-98%vsrecommended
+344%vsminimum
-93%vsminimum
The Ryzen 7 7800X3D and Radeon HD 8450G will struggle to run Palworld at smooth framerates. At 1080p Ultra, you can expect around 8 FPS which is classified as "struggling". Consider lowering settings or upgrading your hardware.
This CPU + GPU combo costs approximately $434 ($384 CPU + $50 GPU). Since the GPU is the main limiting factor, investing in a stronger GPU will improve your framerates and overall value. For example, upgrading to the GeForce RTX 5060 for around $299 (Rank #2 for value) could deliver noticeably better performance.
For Palworld, upgrading the GPU would give you the most noticeable improvement. The Radeon HD 8450G is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Palworld does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Palworld requires at minimum a Core i5-3570K (CPU) and GeForce GTX 1050 (GPU) with 16 GB RAM and 40 GB (SSD) storage. For the recommended experience, you need a Core i9-9900K and GeForce RTX 2070 with 32 GB RAM. Your hardware falls below the minimum requirements for this game, which may result in poor performance.
These Palworld FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
