Bethesda's Creation Engine 2 is CPU-dependent, especially in cities, and requires an SSD for asset streaming. Optimization tends to favor AMD slightly, but generally requires powerful hardware to run smoothly.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, frame rates range from 59 to 98 FPS depending on quality settings. At 1440p, frame rates range from 58 to 90 FPS. At 4K, frame rates range from 25 to 39 FPS.
The Radeon PRO V710 is 18% below minimum GPU requirement for Starfield. The Ryzen 7 7800X3D is 89% above the recommended CPU (Core i5-10600K).
The Radeon PRO V710 sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $2384. At 1080p Ultra, this combo delivers 59 FPS, equivalent to 0.02 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.041 fps/$ | 0.033 fps/$ | 0.026 fps/$ | 0.025 fps/$ |
| 1440p | 0.038 fps/$ | 0.032 fps/$ | 0.027 fps/$ | 0.024 fps/$ |
| 4k | 0.016 fps/$ | 0.014 fps/$ | 0.012 fps/$ | 0.010 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k high, the Radeon PRO V710 sets the ceiling at about 24 FPS, while the Ryzen 7 7800X3D has headroom up to 96 FPS. In this scenario, the GPU limits the CPU potential by 75% (FPS gap: 72 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your Radeon PRO V710 is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 56% | GPU Limits CPU 63% | GPU Limits CPU 67% | GPU Limits CPU 66% |
| 1440p (2K QHD) | GPU Limits CPU 62% | GPU Limits CPU 68% | GPU Limits CPU 70% | GPU Limits CPU 71% |
| 4K (Ultra HD) | GPU Limits CPU 70% | GPU Limits CPU 73% | GPU Limits CPU 75% | GPU Limits CPU 74% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU43% - 50% <> GPU90% - 95% <> | CPU41% - 46% <> GPU95% - 98% <> | CPU36% - 42% <> GPU95% - 100% <> | CPU30% - 40% <> GPU96% - 100% <> |
| 1440p (2K QHD) | CPU32% - 39% <> GPU96% - 96% | CPU31% - 38% <> GPU99% - 99% | CPU29% - 36% <> GPU99% - 100% <> | CPU27% - 31% <> GPU100% - 100% |
| 4K (Ultra HD) | CPU25% - 30% <> GPU96% - 97% <> | CPU22% - 30% <> GPU99% - 100% <> | CPU20% - 29% <> GPU99% - 100% <> | CPU17% - 26% <> GPU100% - 100% |
The Ryzen 7 7800X3D + Radeon PRO V710 pairing runs this title with CPU utilization between 17% and 50% and GPU utilization between 90% and 100%. Ryzen 7 7800X3D keeps significant headroom across presets, while Radeon PRO V710 carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 96% at 1080p to 99% at 4K, while CPU averages move from 41% to 25%.
From a utilization perspective, this is a GPU-heavy load profile. At 1440p (2K QHD) High, the Radeon PRO V710 averages 100% usage (99-100%), while the Ryzen 7 7800X3D stays at 32% (29-36%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.
At 1080p, averages sit around CPU 41% and GPU 96%. At 1440p, that shifts to CPU 33% and GPU 99%, and at 4K it reaches CPU 25% and GPU 99%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
1080p (Full HD) Low is the most balanced preset based on this dataset. It runs around CPU 46% (43-50%) and GPU 92% (90-95%), which keeps Radeon PRO V710 well utilized without constant max-out behavior while Ryzen 7 7800X3D remains stable for consistent frame delivery.
Upgrade priority should be the GPU. The Radeon PRO V710 reaches 100% average load at 1440p (2K QHD) High while the Ryzen 7 7800X3D still has headroom, so a faster graphics card would deliver the largest uplift.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your hardware is below minimum requirements. GPU is the limiting factor (18% below minimum). Expect performance issues. Low settings recommended.
+89%vsrecommended
-52%vsrecommended
+147%vsminimum
-18%vsminimum
The Ryzen 7 7800X3D and Radeon PRO V710 will struggle to run Starfield at smooth framerates. At 1080p Ultra, you can expect around 59 FPS which is classified as "playable". Consider lowering settings or upgrading your hardware.
This CPU + GPU combo costs approximately $2384 ($384 CPU (Rank #212 Value) + $2000 GPU (Rank #84 Value)). Your Radeon PRO V710 is currently the main performance bottleneck and its market value ($2000) is actually higher than newer, faster alternatives. Trading it or upgrading could yield immediate profit and performance gains. For example, upgrading to the Quadro RTX 4000 (móvel) for around $900 (Rank #11 for value) could deliver noticeably better performance while costing less than your current GPU.
For Starfield, upgrading the GPU would give you the most noticeable improvement. The Radeon PRO V710 is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Starfield does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Starfield requires at minimum a Core i7-6800K (CPU) and GeForce GTX 1070 Ti (GPU) with 16 GB RAM and 125 GB (SSD Obrigatório) storage. For the recommended experience, you need a Core i5-10600K and GeForce RTX 2080 with 16 GB RAM. Your hardware falls below the minimum requirements for this game, which may result in poor performance.
These Starfield FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
