Built for massive sieges, this MMO creates a significant CPU bottleneck in large battles. 16GB of RAM is the minimum, setting a standard for next-gen MMOs.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, frame rates range from 23 to 86 FPS depending on quality settings. At 1440p, frame rates range from 18 to 58 FPS. At 4K, frame rates range from 12 to 30 FPS.
The Radeon Pro Vega 48 is 16% below recommended, but 84% above minimum for Throne and Liberty. The Ryzen 7 7800X3D is 76% above the recommended CPU (Core i5-11600K).
The Radeon Pro Vega 48 sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $834. At 1080p Ultra, this combo delivers 23 FPS, equivalent to 0.03 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.103 fps/$ | 0.068 fps/$ | 0.046 fps/$ | 0.028 fps/$ |
| 1440p | 0.070 fps/$ | 0.048 fps/$ | 0.034 fps/$ | 0.022 fps/$ |
| 4k | 0.036 fps/$ | 0.029 fps/$ | 0.018 fps/$ | 0.014 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1440p ultra, the Radeon Pro Vega 48 sets the ceiling at about 17 FPS, while the Ryzen 7 7800X3D has headroom up to 150 FPS. In this scenario, the GPU limits the CPU potential by 89% (FPS gap: 133 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your Radeon Pro Vega 48 is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 68% | GPU Limits CPU 77% | GPU Limits CPU 82% | GPU Limits CPU 87% |
| 1440p (2K QHD) | GPU Limits CPU 75% | GPU Limits CPU 82% | GPU Limits CPU 86% | GPU Limits CPU 89% |
| 4K (Ultra HD) | GPU Limits CPU 83% | GPU Limits CPU 85% | GPU Limits CPU 89% | GPU Limits CPU 88% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU46% - 60% <> GPU67% - 75% <> | CPU43% - 64% <> GPU74% - 79% <> | CPU43% - 64% <> GPU74% - 79% <> | CPU31% - 49% <> GPU73% - 79% <> |
| 1440p (2K QHD) | CPU43% - 55% <> GPU68% - 75% <> | CPU36% - 57% <> GPU75% - 79% <> | CPU36% - 57% <> GPU75% - 79% <> | CPU25% - 42% <> GPU75% - 79% <> |
| 4K (Ultra HD) | CPU43% - 61% <> GPU63% - 76% <> | CPU40% - 63% <> GPU70% - 81% <> | CPU40% - 63% <> GPU70% - 81% <> | CPU29% - 48% <> GPU70% - 81% <> |
The Ryzen 7 7800X3D + Radeon Pro Vega 48 pairing runs this title with CPU utilization between 25% and 64% and GPU utilization between 63% and 81%. Ryzen 7 7800X3D keeps significant headroom across presets, while Radeon Pro Vega 48 is utilized efficiently without persistent saturation. As resolution scales, average GPU load rises from 75% at 1080p to 75% at 4K, while CPU averages move from 50% to 49%.
The utilization pattern is relatively even. The Radeon Pro Vega 48 reaches 77% average at its highest-load preset, while the Ryzen 7 7800X3D peaks at 54% average. This suggests a fairly controlled load distribution, but the actual FPS-limiting side should still be read from the limiter analysis above.
At 1080p, averages sit around CPU 50% and GPU 75%. At 1440p, that shifts to CPU 44% and GPU 76%, and at 4K it reaches CPU 49% and GPU 75%. This shows that workload scaling is limited, which can indicate engine-side constraints.
1440p (2K QHD) Medium is the most balanced preset based on this dataset. It runs around CPU 46% (36-57%) and GPU 77% (75-79%), which keeps Radeon Pro Vega 48 well utilized without constant max-out behavior while Ryzen 7 7800X3D remains stable for consistent frame delivery.
Current utilization does not show an urgent upgrade requirement for either component; the Ryzen 7 7800X3D and Radeon Pro Vega 48 remain reasonably matched for this title.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 76% below recommended and your GPU is 16% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
+76%vsrecommended
-16%vsrecommended
+161%vsminimum
+84%vsminimum
The Ryzen 7 7800X3D and Radeon Pro Vega 48 will struggle to run Throne and Liberty at smooth framerates. At 1080p Ultra, you can expect around 23 FPS which is classified as "struggling". Consider lowering settings or upgrading your hardware.
This CPU + GPU combo costs approximately $834 ($384 CPU (Rank #212 Value) + $450 GPU (Rank #26 Value)). Your build is already very cost-efficient, but if you want even more FPS, the next good option is upgrading the GPU. For example, upgrading to the Quadro RTX 4000 (móvel) for around $900 (Rank #11 for value) could deliver noticeably better performance.
For Throne and Liberty, upgrading the GPU would give you the most noticeable improvement. The Radeon Pro Vega 48 is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Throne and Liberty does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Throne and Liberty requires at minimum a Core i5-7700 (CPU) and GeForce GTX 960 (GPU) with 16 GB RAM and 63 GB storage. For the recommended experience, you need a Core i5-11600K and GeForce GTX 1660 with 16 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Throne and Liberty FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
