A dense RPG where Act 3 becomes a CPU stress test due to the high number of NPCs. An SSD is vital for loading times. 16GB of RAM is recommended, and the game benefits greatly from upscaling tech like DLSS and FSR.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, frame rates range from 12 to 34 FPS depending on quality settings. At 1440p, frame rates range from 9 to 26 FPS. At 4K, frame rates range from 4 to 11 FPS.
The Radeon R5 435 is 92% below minimum GPU requirement for Baldur's Gate 3. The Ryzen 7 7800X3D is 94% above the recommended CPU (Core i7-8700K).
The Radeon R5 435 sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $464. At 1080p Ultra, this combo delivers 12 FPS, equivalent to 0.03 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.073 fps/$ | 0.058 fps/$ | 0.043 fps/$ | 0.026 fps/$ |
| 1440p | 0.056 fps/$ | 0.041 fps/$ | 0.032 fps/$ | 0.019 fps/$ |
| 4k | 0.024 fps/$ | 0.015 fps/$ | 0.013 fps/$ | 0.009 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k high, the Radeon R5 435 sets the ceiling at about 9 FPS, while the Ryzen 7 7800X3D has headroom up to 49 FPS. In this scenario, the GPU limits the CPU potential by 82% (FPS gap: 40 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your Radeon R5 435 is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 71% | GPU Limits CPU 75% | GPU Limits CPU 73% | GPU Limits CPU 75% |
| 1440p (2K QHD) | GPU Limits CPU 76% | GPU Limits CPU 79% | GPU Limits CPU 78% | GPU Limits CPU 78% |
| 4K (Ultra HD) | GPU Limits CPU 75% | GPU Limits CPU 80% | GPU Limits CPU 82% | GPU Limits CPU 79% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your hardware is below minimum requirements. GPU is the limiting factor (92% below minimum). Expect performance issues. Low settings recommended.
+94%vsrecommended
-95%vsrecommended
+478%vsminimum
-92%vsminimum
The Ryzen 7 7800X3D and Radeon R5 435 will struggle to run Baldur's Gate 3 at smooth framerates. At 1080p Ultra, you can expect around 12 FPS which is classified as "struggling". Consider lowering settings or upgrading your hardware.
This CPU + GPU combo costs approximately $464 ($384 CPU + $80 GPU). Since the GPU is the main limiting factor, investing in a stronger GPU will improve your framerates and overall value. For example, upgrading to the GeForce GTX 1080 SLI (móvel) (Rank #2 for value) could deliver noticeably better performance.
For Baldur's Gate 3, upgrading the GPU would give you the most noticeable improvement. The Radeon R5 435 is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Baldur's Gate 3 does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Baldur's Gate 3 requires at minimum a Core i5-4690 (CPU) and GeForce GTX 970 (GPU) with 8 GB RAM and 150 GB (SSD) storage. For the recommended experience, you need a Core i7-8700K and GeForce RTX 2060 Super with 16 GB RAM. Your hardware falls below the minimum requirements for this game, which may result in poor performance.
These Baldur's Gate 3 FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
