Built for massive sieges, this MMO creates a significant CPU bottleneck in large battles. 16GB of RAM is the minimum, setting a standard for next-gen MMOs.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, frame rates range from 27 to 61 FPS depending on quality settings. At 1440p, frame rates range from 21 to 40 FPS. At 4K, frame rates range from 17 to 31 FPS.
The Radeon R9 390 is 34% below recommended, but 44% above minimum for Throne and Liberty. The Ryzen 7 7800X3D is 76% above the recommended CPU (Core i5-11600K).
Throne and Liberty supports: AFMF. The Radeon R9 390 can use AFMF, providing up to 1.5x-2x frame rate boost.
The Radeon R9 390 sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $449. At 1080p Ultra, this combo delivers 27 FPS, equivalent to 0.06 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.136 fps/$ | 0.094 fps/$ | 0.085 fps/$ | 0.060 fps/$ |
| 1440p | 0.089 fps/$ | 0.067 fps/$ | 0.067 fps/$ | 0.047 fps/$ |
| 4k | 0.069 fps/$ | 0.058 fps/$ | 0.051 fps/$ | 0.038 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1440p medium, the Radeon R9 390 sets the ceiling at about 28 FPS, while the Ryzen 7 7800X3D has headroom up to 210 FPS. In this scenario, the GPU limits the CPU potential by 87% (FPS gap: 182 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your Radeon R9 390 is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 77% | GPU Limits CPU 83% | GPU Limits CPU 82% | GPU Limits CPU 85% |
| 1440p (2K QHD) | GPU Limits CPU 83% | GPU Limits CPU 87% | GPU Limits CPU 85% | GPU Limits CPU 87% |
| 4K (Ultra HD) | GPU Limits CPU 82% | GPU Limits CPU 84% | GPU Limits CPU 82% | GPU Limits CPU 83% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 76% below recommended and your GPU is 34% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
+76%vsrecommended
-34%vsrecommended
+161%vsminimum
+44%vsminimum
The Ryzen 7 7800X3D and Radeon R9 390 will struggle to run Throne and Liberty at smooth framerates. At 1080p Ultra, you can expect around 27 FPS which is classified as "struggling". Consider lowering settings or upgrading your hardware.
This CPU + GPU combo costs approximately $449 ($384 CPU (Rank #212 Value) + $65 GPU). Since the GPU is the main limiting factor, investing in a stronger GPU will improve your framerates and overall value. For example, upgrading to the GeForce RTX 5060 for around $299 (Rank #2 for value) could deliver noticeably better performance.
For Throne and Liberty, upgrading the GPU would give you the most noticeable improvement. The Radeon R9 390 is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p high, 1080p low, 1080p medium, 1080p ultra, 1440p high, 1440p low, 1440p medium, 1440p ultra, 4k high, 4k low, 4k medium, 4k ultra.
Yes! Throne and Liberty supports AFMF, and your Radeon R9 390 is compatible with AFMF. With Frame Generation enabled, you can expect a 1.5x-2x FPS multiplier on top of native framerates, significantly boosting perceived smoothness.
Throne and Liberty requires at minimum a Core i5-7700 (CPU) and GeForce GTX 960 (GPU) with 16 GB RAM and 63 GB storage. For the recommended experience, you need a Core i5-11600K and GeForce GTX 1660 with 16 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Throne and Liberty FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
