1Can the Ryzen 7 7800X3D and Radeon R9 M375X run Naraka: Bladepoint well?
The Ryzen 7 7800X3D and Radeon R9 M375X will struggle to run Naraka: Bladepoint at smooth framerates.
Naraka: BladepointFPS onRyzen 7 7800X3D&Radeon R9 M375X
Naraka: Bladepoint
Unlike shooters, Naraka focuses on melee combat with fluid animations. The game is visually dense and supports DLSS, which is vital for high frame rates at resolutions above 1080p. An SSD is critical for map loading, and 16GB of RAM is recommended for smooth gameplay.
Performance Report
Naraka: Bladepoint
Radeon R9 M375X + Ryzen 7 7800X3D
🎮Visual Experience
⚠️Official Requirements
The Radeon R9 M375X is 56% below minimum GPU requirement for Naraka: Bladepoint. The Ryzen 7 7800X3D is 161% above the recommended CPU (Core i7-7700).
✅FPS Ceiling Analysis
No major FPS-ceiling mismatch detected. The Radeon R9 M375X and Ryzen 7 7800X3D stay close in effective frame-generation ceiling across the tested resolutions and quality settings.
💰Value Analysis
📊Predicted Hardware Utilization for Ryzen 7 7800X3D and Radeon R9 M375X
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU57% - 74% <> GPU65% - 84% <> | CPU57% - 74% <> GPU65% - 84% <> | CPU19% - 42% <> GPU85% - 99% <> | CPU18% - 44% <> GPU87% - 100% <> |
| 1440p (2K QHD) | CPU56% - 71% <> GPU62% - 83% <> | CPU56% - 71% <> GPU62% - 83% <> | CPU13% - 38% <> GPU87% - 98% <> | CPU13% - 39% <> GPU89% - 99% <> |
| 4K (Ultra HD) | CPU55% - 66% <> GPU62% - 83% <> | CPU55% - 66% <> GPU62% - 83% <> | CPU11% - 34% <> GPU85% - 98% <> | CPU5% - 29% <> GPU87% - 99% <> |
1080p (Full HD)
Low
CPU57% - 74%
<>
GPU65% - 84%
<>
Medium
CPU57% - 74%
<>
GPU65% - 84%
<>
High
CPU19% - 42%
<>
GPU85% - 99%
<>
Ultra
CPU18% - 44%
<>
GPU87% - 100%
<>
1440p (2K QHD)
Low
CPU56% - 71%
<>
GPU62% - 83%
<>
Medium
CPU56% - 71%
<>
GPU62% - 83%
<>
High
CPU13% - 38%
<>
GPU87% - 98%
<>
Ultra
CPU13% - 39%
<>
GPU89% - 99%
<>
4K (Ultra HD)
Low
CPU55% - 66%
<>
GPU62% - 83%
<>
Medium
CPU55% - 66%
<>
GPU62% - 83%
<>
High
CPU11% - 34%
<>
GPU85% - 98%
<>
Ultra
CPU5% - 29%
<>
GPU87% - 99%
<>
Performance Summary
The Ryzen 7 7800X3D + Radeon R9 M375X pairing runs this title with CPU utilization between 5% and 74% and GPU utilization between 62% and 100%. Ryzen 7 7800X3D stays in a controlled operating range, while Radeon R9 M375X carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 84% at 1080p to 82% at 4K, while CPU averages move from 48% to 40%.
Load Interpretation
From a utilization perspective, this is a GPU-heavy load profile. At 1080p (Full HD) Ultra, the Radeon R9 M375X averages 94% usage (87-100%), while the Ryzen 7 7800X3D stays at 31% (18-44%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.
Resolution Scaling
At 1080p, averages sit around CPU 48% and GPU 84%. At 1440p, that shifts to CPU 45% and GPU 83%, and at 4K it reaches CPU 40% and GPU 82%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
Optimal Settings Recommendation
1080p (Full HD) High is the most balanced preset based on this dataset. It runs around CPU 30% (19-42%) and GPU 92% (85-99%), which keeps Radeon R9 M375X well utilized without constant max-out behavior while Ryzen 7 7800X3D remains stable for consistent frame delivery.
Upgrade Insight
Current utilization does not show an urgent upgrade requirement for either component; the Ryzen 7 7800X3D and Radeon R9 M375X remain reasonably matched for this title.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
- High GPU Load: You typically want to see High GPU Utilization (90%+) and moderate CPU usage when visual settings are heavy. This indicates the graphics pipeline is under strong load, but the exact FPS limiter should still be confirmed by the FPS ceiling analysis.
- High CPU Load: If you see High CPU Utilization (85%+) paired with lower GPU utilization, the processor is handling a disproportionate share of frame preparation and game logic. That can point to CPU-side pressure, but it should not be treated as a direct replacement for FPS ceiling analysis.
- Low CPU and GPU Load: If both CPU and GPU utilization are relatively low, it means the hardware is waiting on something else. This could be a game engine limitation, poorly optimized code, or an artificial framerate cap like VSync holding performance back. It does not mean both parts are equally fast in FPS terms.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
Naraka: Bladepoint Requirements Comparison
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
CPU - Ryzen 7 7800X3D
34,293
Your Score
MinimumCore i5-4460
RecommendedCore i7-7700
GPU - Radeon R9 M375X
1,711
Your Score
MinimumGeForce GTX 750 Ti
RecommendedGeForce GTX 1060
Your hardware is below minimum requirements. GPU is the limiting factor (56% below minimum). Expect performance issues. Low settings recommended.
+161%vsrecommended
-83%vsrecommended
+598%vsminimum
-56%vsminimum
Minimum Requirements
Video Card: GeForce GTX 750 Ti
Processor: Core i5-4460
Memory: 8 GB
Disk Space: 20 GB
System: Windows 10 64-bit
Recommended Requirements
Video Card: GeForce GTX 1060
Processor: Core i7-7700
Memory: 16 GB
Disk Space: 20 GB (SSD)
System: Windows 10 64-bit
Frequently Asked Questions
2Is there a more cost-effective setup to run Naraka: Bladepoint?
This CPU + GPU combo costs approximately $434 ($384 CPU (Rank #212 Value) + $50 GPU). This is a well-balanced setup, meaning you're getting good value from both components without significant waste.
3Which component should I upgrade first to improve Naraka: Bladepoint performance?
This setup is already well-balanced for Naraka: Bladepoint. No significant bottleneck - CPU and GPU are well matched across all settings. Both the Ryzen 7 7800X3D and Radeon R9 M375X complement each other effectively, so upgrading either component individually would yield diminishing returns. If you want more FPS, you'd benefit most from upgrading both CPU and GPU together.
4Does this setup support Frame Generation for Naraka: Bladepoint?
Naraka: Bladepoint does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
5What are the minimum and recommended specs for Naraka: Bladepoint?
Naraka: Bladepoint requires at minimum a Core i5-4460 (CPU) and GeForce GTX 750 Ti (GPU) with 8 GB RAM and 20 GB storage. For the recommended experience, you need a Core i7-7700 and GeForce GTX 1060 with 16 GB RAM. Your hardware falls below the minimum requirements for this game, which may result in poor performance.
6How accurate are these Naraka: Bladepoint FPS estimates for the Ryzen 7 7800X3D and Radeon R9 M375X?
These Naraka: Bladepoint FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.