Valve's new MOBA/Shooter hybrid. It has higher requirements than Dota 2, with 16GB of RAM recommended for a smooth experience.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, frame rates range from 28 to 55 FPS depending on quality settings. At 1440p, frame rates range from 14 to 33 FPS. At 4K, frame rates range from 7 to 16 FPS.
The Radeon RX 5300 is 24% below recommended, but 88% above minimum for Deadlock. The Ryzen 7 7800X3D is 161% above the recommended CPU (Core i7-6700K).
Deadlock supports: AFMF. The Radeon RX 5300 can use AFMF, providing up to 1.5x-2x frame rate boost.
The Radeon RX 5300 sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $434. At 1080p Ultra, this combo delivers 28 FPS, equivalent to 0.06 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.127 fps/$ | 0.106 fps/$ | 0.083 fps/$ | 0.065 fps/$ |
| 1440p | 0.076 fps/$ | 0.060 fps/$ | 0.046 fps/$ | 0.032 fps/$ |
| 4k | 0.037 fps/$ | 0.028 fps/$ | 0.021 fps/$ | 0.016 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k ultra, the Radeon RX 5300 sets the ceiling at about 7 FPS, while the Ryzen 7 7800X3D has headroom up to 112 FPS. In this scenario, the GPU limits the CPU potential by 94% (FPS gap: 105 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your Radeon RX 5300 is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 79% | GPU Limits CPU 80% | GPU Limits CPU 82% | GPU Limits CPU 84% |
| 1440p (2K QHD) | GPU Limits CPU 88% | GPU Limits CPU 90% | GPU Limits CPU 91% | GPU Limits CPU 93% |
| 4K (Ultra HD) | GPU Limits CPU 90% | GPU Limits CPU 92% | GPU Limits CPU 93% | GPU Limits CPU 94% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 161% below recommended and your GPU is 24% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
+161%vsrecommended
-24%vsrecommended
+435%vsminimum
+88%vsminimum
The Ryzen 7 7800X3D and Radeon RX 5300 will struggle to run Deadlock at smooth framerates. At 1080p Ultra, you can expect around 28 FPS which is classified as "struggling". Consider lowering settings or upgrading your hardware.
This CPU + GPU combo costs approximately $434 ($384 CPU (Rank #212 Value) + $50 GPU (Rank #34 Value)). Your build is already very cost-efficient, but if you want even more FPS, the next good option is upgrading the GPU. For example, upgrading to the GeForce RTX 5060 for around $299 (Rank #2 for value) could deliver noticeably better performance.
For Deadlock, upgrading the GPU would give you the most noticeable improvement. The Radeon RX 5300 is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p high, 1080p low, 1080p medium, 1080p ultra, 1440p high, 1440p low, 1440p medium, 1440p ultra, 4k high, 4k low, 4k medium, 4k ultra.
Yes! Deadlock supports AFMF, and your Radeon RX 5300 is compatible with AFMF. With Frame Generation enabled, you can expect a 1.5x-2x FPS multiplier on top of native framerates, significantly boosting perceived smoothness.
Deadlock requires at minimum a Core i5-2500K (CPU) and GeForce GTX 660 (GPU) with 8 GB RAM and 20 GB storage. For the recommended experience, you need a Core i7-6700K and GeForce GTX 1060 with 16 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Deadlock FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
