The benchmark for modern graphical fidelity. Update 2.0 and Phantom Liberty raised the requirements, making an SSD mandatory. The dense city and NPC AI require strong multi-thread CPU performance. Path Tracing ('Overdrive Mode') is a feature reserved for high-end RTX 40 series cards with Frame Generation.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, frame rates range from 49 to 93 FPS depending on quality settings. At 1440p, frame rates range from 31 to 63 FPS. At 4K, frame rates range from 14 to 30 FPS.
The Radeon RX 5600 OEM is 25% below recommended, but 23% above minimum for Cyberpunk 2077. The Ryzen 7 7800X3D is 0% above the recommended CPU (Core i7-12700).
Cyberpunk 2077 supports: DLSS Frame Gen, FSR 3 Frame Gen, AFMF. The Radeon RX 5600 OEM can use FSR 3 Frame Gen and AFMF, providing up to 1.5x-2x frame rate boost.
The Radeon RX 5600 OEM sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k medium, the Radeon RX 5600 OEM sets the ceiling at about 21 FPS, while the Ryzen 7 7800X3D has headroom up to 130 FPS. In this scenario, the GPU limits the CPU potential by 84% (FPS gap: 109 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your Radeon RX 5600 OEM is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 63% | GPU Limits CPU 71% | GPU Limits CPU 74% | GPU Limits CPU 72% |
| 1440p (2K QHD) | GPU Limits CPU 69% | GPU Limits CPU 76% | GPU Limits CPU 79% | GPU Limits CPU 78% |
| 4K (Ultra HD) | GPU Limits CPU 78% | GPU Limits CPU 84% | GPU Limits CPU 81% | GPU Limits CPU 80% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 0% below recommended and your GPU is 25% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
+0%vsrecommended
-25%vsrecommended
+180%vsminimum
+23%vsminimum
The Ryzen 7 7800X3D and Radeon RX 5600 OEM will struggle to run Cyberpunk 2077 at smooth framerates. At 1080p Ultra, you can expect around 49 FPS which is classified as "playable". Consider lowering settings or upgrading your hardware.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
For Cyberpunk 2077, upgrading the GPU would give you the most noticeable improvement. The Radeon RX 5600 OEM is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p high, 1080p low, 1080p medium, 1080p ultra, 1440p high, 1440p low, 1440p medium, 1440p ultra, 4k high, 4k low, 4k medium, 4k ultra.
Yes! Cyberpunk 2077 supports DLSS Frame Gen and FSR 3 Frame Gen and AFMF, and your Radeon RX 5600 OEM is compatible with FSR 3 Frame Gen and AFMF. With Frame Generation enabled, you can expect a 1.5x-2x FPS multiplier on top of native framerates, significantly boosting perceived smoothness.
Cyberpunk 2077 requires at minimum a Core i7-6700 (CPU) and GeForce GTX 1060 (GPU) with 12 GB RAM and 70 GB (SSD) storage. For the recommended experience, you need a Core i7-12700 and GeForce RTX 2060 Super with 16 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Cyberpunk 2077 FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
