Unlike shooters, Naraka focuses on melee combat with fluid animations. The game is visually dense and supports DLSS, which is vital for high frame rates at resolutions above 1080p. An SSD is critical for map loading, and 16GB of RAM is recommended for smooth gameplay.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 68 FPS. At 1440p, frame rates range from 58 to 133 FPS. At 4K, frame rates range from 36 to 77 FPS.
The Radeon RX 580 2048SP is 24% below recommended, but 96% above minimum for Naraka: Bladepoint. The Ryzen 7 7800X3D is 161% above the recommended CPU (Core i7-7700).
Naraka: Bladepoint supports: DLSS Frame Gen, FSR 3 Frame Gen, AFMF. The Radeon RX 580 2048SP can use FSR 3 Frame Gen and AFMF, providing up to 1.5x-2x frame rate boost.
The Radeon RX 580 2048SP sets the FPS ceiling at 1080p (low/high/ultra), all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom. The FPS ceiling is closely matched at 1080p medium.
Approximated average price on current market:
Combo price: $444. At 1080p Ultra, this combo delivers 68 FPS, equivalent to 0.15 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.365 fps/$ | 0.279 fps/$ | 0.203 fps/$ | 0.153 fps/$ |
| 1440p | 0.300 fps/$ | 0.236 fps/$ | 0.171 fps/$ | 0.131 fps/$ |
| 4k | 0.173 fps/$ | 0.140 fps/$ | 0.099 fps/$ | 0.081 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k ultra, the Radeon RX 580 2048SP sets the ceiling at about 41 FPS, while the Ryzen 7 7800X3D has headroom up to 115 FPS. In this scenario, the GPU limits the CPU potential by 64% (FPS gap: 74 FPS). Overall distribution: GPU limits 11/12 cells, CPU limits 0/12, balanced 1/12.
Your Radeon RX 580 2048SP is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 14% | Balanced | GPU Limits CPU 11% | GPU Limits CPU 33% |
| 1440p (2K QHD) | GPU Limits CPU 29% | GPU Limits CPU 22% | GPU Limits CPU 32% | GPU Limits CPU 47% |
| 4K (Ultra HD) | GPU Limits CPU 51% | GPU Limits CPU 54% | GPU Limits CPU 60% | GPU Limits CPU 64% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 161% below recommended and your GPU is 24% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
+161%vsrecommended
-24%vsrecommended
+598%vsminimum
+96%vsminimum
Yes, the Ryzen 7 7800X3D paired with the Radeon RX 580 2048SP can run Naraka: Bladepoint smoothly up to 1080p achieving around 68 FPS at Ultra quality. Your GPU is 24% below the recommended specs, and your CPU is 161% above the recommended requirements.
This CPU + GPU combo costs approximately $444 ($384 CPU (Rank #212 Value) + $60 GPU). Since the GPU is the main limiting factor, investing in a stronger GPU will improve your framerates and overall value. For example, upgrading to the GeForce RTX 5060 for around $299 (Rank #2 for value) could deliver noticeably better performance.
For Naraka: Bladepoint, upgrading the GPU would give you the most noticeable improvement. The Radeon RX 580 2048SP is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p high, 1080p low, 1080p ultra, 1440p high, 1440p low, 1440p medium, 1440p ultra, 4k high, 4k low, 4k medium, 4k ultra.
Yes! Naraka: Bladepoint supports DLSS Frame Gen and FSR 3 Frame Gen and AFMF, and your Radeon RX 580 2048SP is compatible with FSR 3 Frame Gen and AFMF. With Frame Generation enabled, you can expect a 1.5x-2x FPS multiplier on top of native framerates, significantly boosting perceived smoothness.
Naraka: Bladepoint requires at minimum a Core i5-4460 (CPU) and GeForce GTX 750 Ti (GPU) with 8 GB RAM and 20 GB storage. For the recommended experience, you need a Core i7-7700 and GeForce GTX 1060 with 16 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Naraka: Bladepoint FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
