This 'Pokémon with guns' survival game runs on Unreal Engine. It is CPU-heavy due to AI simulation for the many creatures. Memory leaks can occur in long sessions, making 16GB of RAM a practical minimum.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 68 FPS. At 1440p, frame rates range from 57 to 90 FPS. At 4K, frame rates range from 19 to 40 FPS.
The Radeon RX 590 is 42% below recommended, but 85% above minimum for Palworld. The Ryzen 7 7800X3D is 53% above the recommended CPU (Core i9-9900K).
The Radeon RX 590 sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $449. At 1080p Ultra, this combo delivers 68 FPS, equivalent to 0.15 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.301 fps/$ | 0.232 fps/$ | 0.205 fps/$ | 0.151 fps/$ |
| 1440p | 0.200 fps/$ | 0.158 fps/$ | 0.151 fps/$ | 0.127 fps/$ |
| 4k | 0.089 fps/$ | 0.065 fps/$ | 0.051 fps/$ | 0.042 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k high, the Radeon RX 590 sets the ceiling at about 24 FPS, while the Ryzen 7 7800X3D has headroom up to 132 FPS. In this scenario, the GPU limits the CPU potential by 82% (FPS gap: 108 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your Radeon RX 590 is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 62% | GPU Limits CPU 64% | GPU Limits CPU 60% | GPU Limits CPU 68% |
| 1440p (2K QHD) | GPU Limits CPU 71% | GPU Limits CPU 74% | GPU Limits CPU 71% | GPU Limits CPU 73% |
| 4K (Ultra HD) | GPU Limits CPU 78% | GPU Limits CPU 80% | GPU Limits CPU 82% | GPU Limits CPU 80% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU52% - 56% <> GPU90% - 93% <> | CPU48% - 48% GPU95% - 99% <> | CPU34% - 49% <> GPU95% - 100% <> | CPU33% - 45% <> GPU94% - 100% <> |
| 1440p (2K QHD) | CPU40% - 53% <> GPU90% - 98% <> | CPU44% - 44% GPU99% - 99% | CPU28% - 42% <> GPU100% - 100% | CPU28% - 37% <> GPU99% - 100% <> |
| 4K (Ultra HD) | CPU37% - 51% <> GPU90% - 98% <> | CPU40% - 42% <> GPU99% - 99% | CPU25% - 37% <> GPU100% - 100% | CPU24% - 37% <> GPU100% - 100% |
The Ryzen 7 7800X3D + Radeon RX 590 pairing runs this title with CPU utilization between 24% and 56% and GPU utilization between 90% and 100%. Ryzen 7 7800X3D keeps significant headroom across presets, while Radeon RX 590 carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 96% at 1080p to 98% at 4K, while CPU averages move from 46% to 37%.
From a utilization perspective, this is a GPU-heavy load profile. At 1440p (2K QHD) High, the Radeon RX 590 averages 100% usage (100-100%), while the Ryzen 7 7800X3D stays at 35% (28-42%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.
At 1080p, averages sit around CPU 46% and GPU 96%. At 1440p, that shifts to CPU 39% and GPU 98%, and at 4K it reaches CPU 37% and GPU 98%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
1080p (Full HD) Low is the most balanced preset based on this dataset. It runs around CPU 54% (52-56%) and GPU 92% (90-93%), which keeps Radeon RX 590 well utilized without constant max-out behavior while Ryzen 7 7800X3D remains stable for consistent frame delivery.
Upgrade priority should be the GPU. The Radeon RX 590 reaches 100% average load at 1440p (2K QHD) High while the Ryzen 7 7800X3D still has headroom, so a faster graphics card would deliver the largest uplift.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 53% below recommended and your GPU is 42% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
+53%vsrecommended
-42%vsrecommended
+344%vsminimum
+85%vsminimum
Yes, the Ryzen 7 7800X3D paired with the Radeon RX 590 can run Palworld smoothly up to 1080p achieving around 68 FPS at Ultra quality. Your GPU is 42% below the recommended specs, and your CPU is 53% above the recommended requirements.
This CPU + GPU combo costs approximately $449 ($384 CPU (Rank #212 Value) + $65 GPU). Since the GPU is the main limiting factor, investing in a stronger GPU will improve your framerates and overall value. For example, upgrading to the GeForce RTX 5060 for around $299 (Rank #2 for value) could deliver noticeably better performance.
For Palworld, upgrading the GPU would give you the most noticeable improvement. The Radeon RX 590 is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Palworld does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Palworld requires at minimum a Core i5-3570K (CPU) and GeForce GTX 1050 (GPU) with 16 GB RAM and 40 GB (SSD) storage. For the recommended experience, you need a Core i9-9900K and GeForce RTX 2070 with 32 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Palworld FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
