A dense RPG where Act 3 becomes a CPU stress test due to the high number of NPCs. An SSD is vital for loading times. 16GB of RAM is recommended, and the game benefits greatly from upscaling tech like DLSS and FSR.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 134 FPS. At 1440p, all settings exceed 74 FPS. At 4K, frame rates range from 47 to 90 FPS.
The Radeon RX 6600 LE is 17% below recommended, but 43% above minimum for Baldur's Gate 3. The Ryzen 7 7800X3D is 94% above the recommended CPU (Core i7-8700K).
Baldur's Gate 3 supports: AFMF. The Radeon RX 6600 LE can use AFMF, providing up to 1.5x-2x frame rate boost.
The Radeon RX 6600 LE sets the FPS ceiling at 1080p (low/medium), all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom. The FPS ceiling is closely matched at 1080p (high/ultra).
Approximated average price on current market:
Combo price: $544. At 1080p Ultra, this combo delivers 134 FPS, equivalent to 0.25 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.375 fps/$ | 0.327 fps/$ | 0.290 fps/$ | 0.246 fps/$ |
| 1440p | 0.232 fps/$ | 0.191 fps/$ | 0.165 fps/$ | 0.136 fps/$ |
| 4k | 0.165 fps/$ | 0.142 fps/$ | 0.119 fps/$ | 0.086 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k ultra, the Radeon RX 6600 LE sets the ceiling at about 36 FPS, while the Ryzen 7 7800X3D has headroom up to 92 FPS. In this scenario, the GPU limits the CPU potential by 61% (FPS gap: 56 FPS). Overall distribution: GPU limits 10/12 cells, CPU limits 0/12, balanced 2/12.
Your Radeon RX 6600 LE is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 9% | GPU Limits CPU 14% | Balanced | Balanced |
| 1440p (2K QHD) | GPU Limits CPU 36% | GPU Limits CPU 43% | GPU Limits CPU 37% | GPU Limits CPU 36% |
| 4K (Ultra HD) | GPU Limits CPU 53% | GPU Limits CPU 59% | GPU Limits CPU 58% | GPU Limits CPU 61% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 94% below recommended and your GPU is 17% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
+94%vsrecommended
-17%vsrecommended
+478%vsminimum
+43%vsminimum
Yes, the Ryzen 7 7800X3D paired with the Radeon RX 6600 LE can run Baldur's Gate 3 smoothly up to 1440p achieving around 74 FPS at Ultra quality. Your GPU is 17% below the recommended specs, and your CPU is 94% above the recommended requirements.
This CPU + GPU combo costs approximately $544 ($384 CPU (Rank #212 Value) + $160 GPU (Rank #24 Value)). Your build is already very cost-efficient, but if you want even more FPS, the next good option is upgrading the GPU. For example, upgrading to the GeForce RTX 5060 for around $299 (Rank #2 for value) could deliver noticeably better performance.
For Baldur's Gate 3, upgrading the GPU would give you the most noticeable improvement. The Radeon RX 6600 LE is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p low, 1080p medium, 1440p high, 1440p low, 1440p medium, 1440p ultra, 4k high, 4k low, 4k medium, 4k ultra.
Yes! Baldur's Gate 3 supports AFMF, and your Radeon RX 6600 LE is compatible with AFMF. With Frame Generation enabled, you can expect a 1.5x-2x FPS multiplier on top of native framerates, significantly boosting perceived smoothness.
Baldur's Gate 3 requires at minimum a Core i5-4690 (CPU) and GeForce GTX 970 (GPU) with 8 GB RAM and 150 GB (SSD) storage. For the recommended experience, you need a Core i7-8700K and GeForce RTX 2060 Super with 16 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Baldur's Gate 3 FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
