Returning to compete with Battlefield, Delta Force uses a modern engine featuring environmental destruction. While minimum requirements are accessible (GTX 960), competitive settings scale up to require GTX 10/RTX 20 series GPUs and 16GB of RAM for the best experience.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 107 FPS. At 1440p, all settings exceed 74 FPS. At 4K, frame rates range from 45 to 77 FPS.
The Radeon RX 6800M is 45% above the recommended GPU (GeForce GTX 1060 5GB) for Delta Force. The Ryzen 7 7800X3D is 278% above the recommended CPU (Core i5-6500).
The Radeon RX 6800M sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1440p ultra, the Radeon RX 6800M sets the ceiling at about 69 FPS, while the Ryzen 7 7800X3D has headroom up to 196 FPS. In this scenario, the GPU limits the CPU potential by 65% (FPS gap: 127 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your Radeon RX 6800M is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 31% | GPU Limits CPU 34% | GPU Limits CPU 44% | GPU Limits CPU 57% |
| 1440p (2K QHD) | GPU Limits CPU 51% | GPU Limits CPU 55% | GPU Limits CPU 58% | GPU Limits CPU 65% |
| 4K (Ultra HD) | GPU Limits CPU 51% | GPU Limits CPU 54% | GPU Limits CPU 56% | GPU Limits CPU 60% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU42% - 69% <> GPU94% - 100% <> | CPU42% - 69% <> GPU94% - 100% <> | CPU39% - 66% <> GPU93% - 100% <> | CPU38% - 68% <> GPU93% - 100% <> |
| 1440p (2K QHD) | CPU24% - 43% <> GPU97% - 100% <> | CPU24% - 43% <> GPU97% - 100% <> | CPU26% - 45% <> GPU97% - 100% <> | CPU25% - 44% <> GPU96% - 100% <> |
| 4K (Ultra HD) | CPU16% - 27% <> GPU98% - 100% <> | CPU16% - 27% <> GPU98% - 100% <> | CPU17% - 29% <> GPU99% - 100% <> | CPU16% - 29% <> GPU99% - 100% <> |
The Ryzen 7 7800X3D + Radeon RX 6800M pairing runs this title with CPU utilization between 16% and 69% and GPU utilization between 93% and 100%. Ryzen 7 7800X3D keeps significant headroom across presets, while Radeon RX 6800M carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 97% at 1080p to 100% at 4K, while CPU averages move from 54% to 22%.
From a utilization perspective, this is a GPU-heavy load profile. At 4K (Ultra HD) High, the Radeon RX 6800M averages 100% usage (99-100%), while the Ryzen 7 7800X3D stays at 23% (17-29%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.
At 1080p, averages sit around CPU 54% and GPU 97%. At 1440p, that shifts to CPU 35% and GPU 98%, and at 4K it reaches CPU 22% and GPU 100%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
1080p (Full HD) High is the most balanced preset based on this dataset. It runs around CPU 52% (39-66%) and GPU 96% (93-100%), which keeps Radeon RX 6800M well utilized without constant max-out behavior while Ryzen 7 7800X3D remains stable for consistent frame delivery.
Upgrade priority should be the GPU. The Radeon RX 6800M reaches 100% average load at 4K (Ultra HD) High while the Ryzen 7 7800X3D still has headroom, so a faster graphics card would deliver the largest uplift.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 278% above and your GPU is 45% above the recommended specs. High/Ultra at 1080p. Lower settings for higher resolutions.
+278%vsrecommended
+45%vsrecommended
+729%vsminimum
+117%vsminimum
Yes, the Ryzen 7 7800X3D paired with the Radeon RX 6800M can run Delta Force smoothly up to 1440p achieving around 74 FPS at Ultra quality. Your GPU is 45% above the recommended specs, and your CPU is 278% above the recommended requirements.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
For Delta Force, upgrading the GPU would give you the most noticeable improvement. The Radeon RX 6800M is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Delta Force does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Delta Force requires at minimum a Core i3-4150 (CPU) and GeForce GTX 960 (GPU) with 12 GB RAM and 50 GB storage. For the recommended experience, you need a Core i5-6500 and GeForce GTX 1060 5GB with 16 GB RAM. Your Ryzen 7 7800X3D and Radeon RX 6800M both exceed the recommended specs, so you're well-positioned for a great experience.
These Delta Force FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
