Built for massive sieges, this MMO creates a significant CPU bottleneck in large battles. 16GB of RAM is the minimum, setting a standard for next-gen MMOs.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 117 FPS. At 1440p, all settings exceed 105 FPS. At 4K, frame rates range from 57 to 119 FPS.
The Radeon RX 6950 XT is 109% above the recommended GPU (GeForce GTX 1660) for Throne and Liberty. The Ryzen 7 7800X3D is 76% above the recommended CPU (Core i5-11600K).
Throne and Liberty supports: AFMF. The Radeon RX 6950 XT can use AFMF, providing up to 1.5x-2x frame rate boost.
The Radeon RX 6950 XT sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $1234. At 1080p Ultra, this combo delivers 117 FPS, equivalent to 0.09 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.152 fps/$ | 0.138 fps/$ | 0.106 fps/$ | 0.095 fps/$ |
| 1440p | 0.139 fps/$ | 0.131 fps/$ | 0.103 fps/$ | 0.085 fps/$ |
| 4k | 0.096 fps/$ | 0.083 fps/$ | 0.056 fps/$ | 0.046 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k high, the Radeon RX 6950 XT sets the ceiling at about 65 FPS, while the Ryzen 7 7800X3D has headroom up to 126 FPS. In this scenario, the GPU limits the CPU potential by 48% (FPS gap: 61 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your Radeon RX 6950 XT is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 29% | GPU Limits CPU 28% | GPU Limits CPU 37% | GPU Limits CPU 37% |
| 1440p (2K QHD) | GPU Limits CPU 25% | GPU Limits CPU 28% | GPU Limits CPU 37% | GPU Limits CPU 33% |
| 4K (Ultra HD) | GPU Limits CPU 31% | GPU Limits CPU 36% | GPU Limits CPU 48% | GPU Limits CPU 46% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 76% above and your GPU is 109% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+76%vsrecommended
+109%vsrecommended
+161%vsminimum
+358%vsminimum
Yes, the Ryzen 7 7800X3D paired with the Radeon RX 6950 XT can run Throne and Liberty smoothly up to 1440p achieving around 105 FPS at Ultra quality. Your GPU is 109% above the recommended specs, and your CPU is 76% above the recommended requirements.
This CPU + GPU combo costs approximately $1234 ($384 CPU (Rank #212 Value) + $850 GPU (Rank #71 Value)). Your Radeon RX 6950 XT provides phenomenal top-tier performance but at a premium enthusiast price. Since you are essentially at the ceiling of current hardware capabilities, there are no meaningful performance upgrades available. However, if you wanted a more cost-effective build that still delivers a great experience, you could theoretically step down to a high-end card with a significantly better value rating. For example, upgrading to the GeForce RTX 4090 for around $1599 (Rank #77 for value) could deliver noticeably better performance.
Your Radeon RX 6950 XT is already a top-tier graphics card. While it's technically the limiting factor here (which means you are fully utilizing your GPU's visual horsepower exactly as intended), there is no meaningful upgrade path that would drastically improve your Throne and Liberty performance right now. GPU fully utilized at: 1080p high, 1080p low, 1080p medium, 1080p ultra, 1440p high, 1440p low, 1440p medium, 1440p ultra, 4k high, 4k low, 4k medium, 4k ultra.
Yes! Throne and Liberty supports AFMF, and your Radeon RX 6950 XT is compatible with AFMF. With Frame Generation enabled, you can expect a 1.5x-2x FPS multiplier on top of native framerates, significantly boosting perceived smoothness.
Throne and Liberty requires at minimum a Core i5-7700 (CPU) and GeForce GTX 960 (GPU) with 16 GB RAM and 63 GB storage. For the recommended experience, you need a Core i5-11600K and GeForce GTX 1660 with 16 GB RAM. Your Ryzen 7 7800X3D and Radeon RX 6950 XT both exceed the recommended specs, so you're well-positioned for a great experience.
These Throne and Liberty FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
