Baldur's Gate 3FPS onRyzen 7 7800X3D&Radeon RX 7400

Baldur's Gate 3

A dense RPG where Act 3 becomes a CPU stress test due to the high number of NPCs. An SSD is vital for loading times. 16GB of RAM is recommended, and the game benefits greatly from upscaling tech like DLSS and FSR.

Baldur's Gate 3 - FPS Estimates by Resolution

Actual FPS may vary based on RAM speed, background processes, and other system factors

1080P
low203 FPS
medium172 FPS
high152 FPS
ultra127 FPS
1440P
low133 FPS
medium109 FPS
high95 FPS
ultra75 FPS
4K
low90 FPS
medium74 FPS
high63 FPS
ultra45 FPS

Performance Report

Baldur's Gate 3

Radeon RX 7400 + Ryzen 7 7800X3D
🎮Visual Experience

At 1080p, all quality settings exceed 127 FPS. At 1440p, all settings exceed 75 FPS. At 4K, frame rates range from 45 to 90 FPS.

Official Requirements

The Radeon RX 7400 is 29% below recommended, but 21% above minimum for Baldur's Gate 3. The Ryzen 7 7800X3D is 94% above the recommended CPU (Core i7-8700K).

⚙️FPS Ceiling Analysis

The Radeon RX 7400 sets the FPS ceiling at 1080p (low/medium/ultra), all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom. The FPS ceiling is closely matched at 1080p high.

💰Value Analysis

Approximated average price on current market:

Radeon RX 7400:$199(updated 2/6/2026)
Official Launch Price: $199
Ryzen 7 7800X3D:$384(updated 2/6/2026)
Official Launch Price: $449

Combo price: $583. At 1080p Ultra, this combo delivers 127 FPS, equivalent to 0.22 FPS per dollar.

ResolutionLowMediumHighUltra
1080p0.348 fps/$0.295 fps/$0.261 fps/$0.218 fps/$
1440p0.228 fps/$0.187 fps/$0.163 fps/$0.129 fps/$
4k0.154 fps/$0.127 fps/$0.108 fps/$0.077 fps/$

* Table values represent FPS per Dollar (higher is better)

Performance Limiter Analysis

Ryzen 7 7800X3D|Radeon RX 7400

This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.

📈Analysis

At 4k ultra, the Radeon RX 7400 sets the ceiling at about 35 FPS, while the Ryzen 7 7800X3D has headroom up to 91 FPS. In this scenario, the GPU limits the CPU potential by 62% (FPS gap: 56 FPS). Overall distribution: GPU limits 11/12 cells, CPU limits 0/12, balanced 1/12.

Verdict

GPU Limits CPU

Your Radeon RX 7400 is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.

🧩Detailed Breakdown
1080p (Full HD)
LowGPU Limits CPU 8%
MediumGPU Limits CPU 15%
HighBalanced
UltraGPU Limits CPU 7%
1440p (2K QHD)
LowGPU Limits CPU 33%
MediumGPU Limits CPU 41%
HighGPU Limits CPU 34%
UltraGPU Limits CPU 34%
4K (Ultra HD)
LowGPU Limits CPU 54%
MediumGPU Limits CPU 59%
HighGPU Limits CPU 59%
UltraGPU Limits CPU 62%
Percentages show how much potential FPS of the stronger component is lost because the other component has a lower FPS ceiling.
🧠Methodology

We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.

Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.

CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.

A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.

📊Predicted Hardware Utilization for Ryzen 7 7800X3D and Radeon RX 7400

1080p (Full HD)

Low
CPU33% - 49%
<>
GPU67% - 82%
<>
Medium
CPU33% - 44%
<>
GPU78% - 85%
<>
High
CPU27% - 33%
<>
GPU89% - 93%
<>
Ultra
CPU27% - 29%
<>
GPU97% - 98%
<>

1440p (2K QHD)

Low
CPU32% - 46%
<>
GPU73% - 86%
<>
Medium
CPU32% - 40%
<>
GPU84% - 88%
<>
High
CPU24% - 32%
<>
GPU94% - 97%
<>
Ultra
CPU24% - 27%
<>
GPU99% - 100%
<>

4K (Ultra HD)

Low
CPU46% - 53%
<>
GPU71% - 86%
<>
Medium
CPU45% - 47%
<>
GPU82% - 88%
<>
High
CPU29% - 47%
<>
GPU92% - 97%
<>
Ultra
CPU30% - 45%
<>
GPU99% - 99%

Performance Summary

The Ryzen 7 7800X3D + Radeon RX 7400 pairing runs this title with CPU utilization between 24% and 53% and GPU utilization between 67% and 100%. Ryzen 7 7800X3D keeps significant headroom across presets, while Radeon RX 7400 carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 86% at 1080p to 89% at 4K, while CPU averages move from 34% to 43%.

Load Interpretation

From a utilization perspective, this is a GPU-heavy load profile. At 1440p (2K QHD) Ultra, the Radeon RX 7400 averages 100% usage (99-100%), while the Ryzen 7 7800X3D stays at 26% (24-27%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.

Resolution Scaling

At 1080p, averages sit around CPU 34% and GPU 86%. At 1440p, that shifts to CPU 32% and GPU 91%, and at 4K it reaches CPU 43% and GPU 89%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.

Optimal Settings Recommendation

1440p (2K QHD) Medium is the most balanced preset based on this dataset. It runs around CPU 36% (32-40%) and GPU 86% (84-88%), which keeps Radeon RX 7400 well utilized without constant max-out behavior while Ryzen 7 7800X3D remains stable for consistent frame delivery.

Upgrade Insight

Upgrade priority should be the GPU. The Radeon RX 7400 reaches 100% average load at 1440p (2K QHD) Ultra while the Ryzen 7 7800X3D still has headroom, so a faster graphics card would deliver the largest uplift.

Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.

Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.

  • High GPU Load: You typically want to see High GPU Utilization (90%+) and moderate CPU usage when visual settings are heavy. This indicates the graphics pipeline is under strong load, but the exact FPS limiter should still be confirmed by the FPS ceiling analysis.
  • High CPU Load: If you see High CPU Utilization (85%+) paired with lower GPU utilization, the processor is handling a disproportionate share of frame preparation and game logic. That can point to CPU-side pressure, but it should not be treated as a direct replacement for FPS ceiling analysis.
  • Low CPU and GPU Load: If both CPU and GPU utilization are relatively low, it means the hardware is waiting on something else. This could be a game engine limitation, poorly optimized code, or an artificial framerate cap like VSync holding performance back. It does not mean both parts are equally fast in FPS terms.

Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.

Baldur's Gate 3 Requirements Comparison

See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.

CPU - Ryzen 7 7800X3D
cpu icon
34,293
Your Score
MinimumCore i5-4690
RecommendedCore i7-8700K
GPU - Radeon RX 7400
gpu icon
11,654
Your Score
MinimumGeForce GTX 970
RecommendedGeForce RTX 2060 Super

Your CPU is 94% below recommended and your GPU is 29% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.

CPU

+94%vsrecommended

GPU

-29%vsrecommended

CPU

+478%vsminimum

GPU

+21%vsminimum

Minimum Requirements
Video Card: GeForce GTX 970
Processor: Core i5-4690
Memory: 8 GB
Disk Space: 150 GB (SSD)
System: Windows 10 64-bit
Recommended Requirements
Processor: Core i7-8700K
Memory: 16 GB
Disk Space: 150 GB (SSD)
System: Windows 10 64-bit

Frequently Asked Questions

1Can the Ryzen 7 7800X3D and Radeon RX 7400 run Baldur's Gate 3 well?

Yes, the Ryzen 7 7800X3D paired with the Radeon RX 7400 can run Baldur's Gate 3 smoothly up to 1440p achieving around 75 FPS at Ultra quality. Your GPU is 29% below the recommended specs, and your CPU is 94% above the recommended requirements.

2Is there a more cost-effective setup to run Baldur's Gate 3?

This CPU + GPU combo costs approximately $583 ($384 CPU (Rank #212 Value) + $199 GPU (Rank #31 Value)). Your build is already very cost-efficient, but if you want even more FPS, the next good option is upgrading the GPU. For example, upgrading to the GeForce RTX 5060 for around $299 (Rank #2 for value) could deliver noticeably better performance.

3Which component should I upgrade first to improve Baldur's Gate 3 performance?

For Baldur's Gate 3, upgrading the GPU would give you the most noticeable improvement. The Radeon RX 7400 is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p low, 1080p medium, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.

4Does this setup support Frame Generation for Baldur's Gate 3?

Baldur's Gate 3 does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.

5What are the minimum and recommended specs for Baldur's Gate 3?

Baldur's Gate 3 requires at minimum a Core i5-4690 (CPU) and GeForce GTX 970 (GPU) with 8 GB RAM and 150 GB (SSD) storage. For the recommended experience, you need a Core i7-8700K and GeForce RTX 2060 Super with 16 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.

6How accurate are these Baldur's Gate 3 FPS estimates for the Ryzen 7 7800X3D and Radeon RX 7400?

These Baldur's Gate 3 FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.

Performance estimates are based on synthetic benchmarks and hardware capabilities.

Results may vary based on drivers, OS, and background processes.