Unlike shooters, Naraka focuses on melee combat with fluid animations. The game is visually dense and supports DLSS, which is vital for high frame rates at resolutions above 1080p. An SSD is critical for map loading, and 16GB of RAM is recommended for smooth gameplay.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 81 FPS. At 1440p, all settings exceed 85 FPS. At 4K, frame rates range from 59 to 105 FPS.
The Radeon RX 7600 XT is 71% above the recommended GPU (GeForce GTX 1060) for Naraka: Bladepoint. The Ryzen 7 7800X3D is 161% above the recommended CPU (Core i7-7700).
Naraka: Bladepoint supports: DLSS Frame Gen, FSR 3 Frame Gen, AFMF. The Radeon RX 7600 XT can use FSR 3 Frame Gen and AFMF, providing up to 1.5x-2x frame rate boost.
At lower resolutions (1080p (low/medium/high)), the Ryzen 7 7800X3D sets the FPS ceiling. As graphical load increases at (1080p ultra, 1440p ultra, all 4k settings), the Radeon RX 7600 XT becomes the FPS-limiting side. The FPS ceiling is closely matched at 1440p (low/medium/high).
Approximated average price on current market:
Combo price: $714. At 1080p Ultra, this combo delivers 81 FPS, equivalent to 0.11 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.265 fps/$ | 0.195 fps/$ | 0.141 fps/$ | 0.113 fps/$ |
| 1440p | 0.245 fps/$ | 0.190 fps/$ | 0.144 fps/$ | 0.119 fps/$ |
| 4k | 0.147 fps/$ | 0.122 fps/$ | 0.094 fps/$ | 0.083 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k ultra, the Radeon RX 7600 XT sets the ceiling at about 64 FPS, while the Ryzen 7 7800X3D has headroom up to 115 FPS. In this scenario, the GPU limits the CPU potential by 44% (FPS gap: 51 FPS). Overall distribution: GPU limits 7/12 cells, CPU limits 3/12, balanced 2/12.
Your Radeon RX 7600 XT is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 7% | CPU Limits GPU 14% | CPU Limits GPU 10% | GPU Limits CPU 13% |
| 1440p (2K QHD) | GPU Limits CPU 6% | Balanced | Balanced | GPU Limits CPU 23% |
| 4K (Ultra HD) | GPU Limits CPU 34% | GPU Limits CPU 35% | GPU Limits CPU 39% | GPU Limits CPU 44% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 161% above and your GPU is 71% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+161%vsrecommended
+71%vsrecommended
+598%vsminimum
+342%vsminimum
Yes, the Ryzen 7 7800X3D paired with the Radeon RX 7600 XT can run Naraka: Bladepoint smoothly up to 1440p achieving around 85 FPS at Ultra quality. Your GPU is 71% above the recommended specs, and your CPU is 161% above the recommended requirements.
This CPU + GPU combo costs approximately $714 ($384 CPU (Rank #212 Value) + $330 GPU (Rank #45 Value)). Since the GPU is the main limiting factor, investing in a stronger GPU will improve your framerates and overall value. For example, upgrading to the GeForce RTX 3070 for around $499 (Rank #16 for value) could deliver noticeably better performance.
For Naraka: Bladepoint, upgrading the GPU would give you the most noticeable improvement. The Radeon RX 7600 XT is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p ultra, 1440p ultra, 4k high, 4k low, 4k medium, 4k ultra. CPU-limited at: 1080p high, 1080p low, 1080p medium.
Yes! Naraka: Bladepoint supports DLSS Frame Gen and FSR 3 Frame Gen and AFMF, and your Radeon RX 7600 XT is compatible with FSR 3 Frame Gen and AFMF. With Frame Generation enabled, you can expect a 1.5x-2x FPS multiplier on top of native framerates, significantly boosting perceived smoothness.
Naraka: Bladepoint requires at minimum a Core i5-4460 (CPU) and GeForce GTX 750 Ti (GPU) with 8 GB RAM and 20 GB storage. For the recommended experience, you need a Core i7-7700 and GeForce GTX 1060 with 16 GB RAM. Your Ryzen 7 7800X3D and Radeon RX 7600 XT both exceed the recommended specs, so you're well-positioned for a great experience.
These Naraka: Bladepoint FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
