Unlike shooters, Naraka focuses on melee combat with fluid animations. The game is visually dense and supports DLSS, which is vital for high frame rates at resolutions above 1080p. An SSD is critical for map loading, and 16GB of RAM is recommended for smooth gameplay.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 118 FPS. At 1440p, all settings exceed 101 FPS. At 4K, all settings exceed 76 FPS.
The Radeon RX 7700 XT is 125% above the recommended GPU (GeForce GTX 1060) for Naraka: Bladepoint. The Ryzen 7 7800X3D is 161% above the recommended CPU (Core i7-7700).
At lower resolutions (all 1080p settings, 1440p (medium/high)), the Ryzen 7 7800X3D sets the FPS ceiling. As graphical load increases at (all 4k settings), the Radeon RX 7700 XT becomes the FPS-limiting side. The FPS ceiling is closely matched at 1440p (low/ultra).
Approximated average price on current market:
Combo price: $764. At 1080p Ultra, this combo delivers 118 FPS, equivalent to 0.15 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.302 fps/$ | 0.230 fps/$ | 0.181 fps/$ | 0.154 fps/$ |
| 1440p | 0.234 fps/$ | 0.187 fps/$ | 0.152 fps/$ | 0.132 fps/$ |
| 4k | 0.152 fps/$ | 0.134 fps/$ | 0.109 fps/$ | 0.099 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1080p high, the Ryzen 7 7800X3D sets the ceiling at about 187 FPS, while the Radeon RX 7700 XT could reach 296 FPS. In this scenario, the CPU limits the GPU potential by 37% (FPS gap: 109 FPS). Overall distribution: CPU limits 6/12 cells, GPU limits 4/12, balanced 2/12.
Your Ryzen 7 7800X3D is the limiting side in the heaviest mismatch. This means part of the Radeon RX 7700 XT rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 26% | CPU Limits GPU 34% | CPU Limits GPU 37% | CPU Limits GPU 24% |
| 1440p (2K QHD) | Balanced | CPU Limits GPU 13% | CPU Limits GPU 14% | Balanced |
| 4K (Ultra HD) | GPU Limits CPU 24% | GPU Limits CPU 20% | GPU Limits CPU 21% | GPU Limits CPU 24% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU50% - 74% <> GPU75% - 96% <> | CPU50% - 74% <> GPU75% - 96% <> | CPU12% - 39% <> GPU95% - 100% <> | CPU21% - 44% <> GPU87% - 100% <> |
| 1440p (2K QHD) | CPU47% - 69% <> GPU83% - 97% <> | CPU47% - 69% <> GPU83% - 97% <> | CPU5% - 34% <> GPU100% - 100% | CPU14% - 38% <> GPU99% - 100% <> |
| 4K (Ultra HD) | CPU45% - 60% <> GPU75% - 97% <> | CPU45% - 60% <> GPU75% - 97% <> | CPU2% - 24% <> GPU97% - 100% <> | CPU5% - 24% <> GPU89% - 100% <> |
The Ryzen 7 7800X3D + Radeon RX 7700 XT pairing runs this title with CPU utilization between 2% and 74% and GPU utilization between 75% and 100%. Ryzen 7 7800X3D stays in a controlled operating range, while Radeon RX 7700 XT carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 91% at 1080p to 91% at 4K, while CPU averages move from 46% to 33%.
From a utilization perspective, this is a GPU-heavy load profile. At 1440p (2K QHD) High, the Radeon RX 7700 XT averages 100% usage (100-100%), while the Ryzen 7 7800X3D stays at 20% (5-34%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.
At 1080p, averages sit around CPU 46% and GPU 91%. At 1440p, that shifts to CPU 41% and GPU 95%, and at 4K it reaches CPU 33% and GPU 91%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
1080p (Full HD) Low is the most balanced preset based on this dataset. It runs around CPU 62% (50-74%) and GPU 86% (75-96%), which keeps Radeon RX 7700 XT well utilized without constant max-out behavior while Ryzen 7 7800X3D remains stable for consistent frame delivery.
Upgrade priority should be the GPU. The Radeon RX 7700 XT reaches 100% average load at 1440p (2K QHD) High while the Ryzen 7 7800X3D still has headroom, so a faster graphics card would deliver the largest uplift.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 161% above and your GPU is 125% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+161%vsrecommended
+125%vsrecommended
+598%vsminimum
+481%vsminimum
Yes, the Ryzen 7 7800X3D paired with the Radeon RX 7700 XT can run Naraka: Bladepoint smoothly up to 4k achieving around 76 FPS at Ultra quality. Your GPU is 125% above the recommended specs, and your CPU is 161% above the recommended requirements.
This CPU + GPU combo costs approximately $764 ($384 CPU (Rank #212 Value) + $380 GPU (Rank #26 Value)). Your build is already very cost-efficient, but if you want even more FPS, the next good option is upgrading the CPU. For example, the Ryzen 9 9950X is a great upgrade option for around $649 (Rank #5 for value).
For Naraka: Bladepoint, upgrading the CPU would have the biggest impact on performance. The Ryzen 7 7800X3D is currently the limiting factor — the Radeon RX 7700 XT has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p medium, 1440p high. GPU-limited at: 4k low, 4k medium, 4k high, 4k ultra.
Naraka: Bladepoint does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Naraka: Bladepoint requires at minimum a Core i5-4460 (CPU) and GeForce GTX 750 Ti (GPU) with 8 GB RAM and 20 GB storage. For the recommended experience, you need a Core i7-7700 and GeForce GTX 1060 with 16 GB RAM. Your Ryzen 7 7800X3D and Radeon RX 7700 XT both exceed the recommended specs, so you're well-positioned for a great experience.
These Naraka: Bladepoint FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
