Naraka: BladepointFPS onRyzen 7 7800X3D&Radeon RX 7900 XT

Naraka: Bladepoint

Unlike shooters, Naraka focuses on melee combat with fluid animations. The game is visually dense and supports DLSS, which is vital for high frame rates at resolutions above 1080p. An SSD is critical for map loading, and 16GB of RAM is recommended for smooth gameplay.

Naraka: Bladepoint - FPS Estimates by Resolution

Actual FPS may vary based on RAM speed, background processes, and other system factors

1080P
low257 FPS
medium215 FPS
high168 FPS
ultra152 FPS
1440P
low205 FPS
medium184 FPS
high149 FPS
ultra131 FPS
4K
low145 FPS
medium127 FPS
high106 FPS
ultra98 FPS

Performance Report

Naraka: Bladepoint

Radeon RX 7900 XT + Ryzen 7 7800X3D
🎮Visual Experience

At 1080p, all quality settings exceed 152 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 131 FPS. At 4K, all settings exceed 98 FPS.

Official Requirements

The Radeon RX 7900 XT is 188% above the recommended GPU (GeForce GTX 1060) for Naraka: Bladepoint. The Ryzen 7 7800X3D is 161% above the recommended CPU (Core i7-7700).

AI Acceleration

Naraka: Bladepoint supports: DLSS Frame Gen, FSR 3 Frame Gen, AFMF. The Radeon RX 7900 XT can use FSR 3 Frame Gen and AFMF, providing up to 1.5x-2x frame rate boost.

⚙️FPS Ceiling Analysis

The Ryzen 7 7800X3D sets the FPS ceiling at all 1080p settings, all 1440p settings, while the Radeon RX 7900 XT still has headroom. The FPS ceiling is closely matched at all 4k settings.

💰Value Analysis

Approximated average price on current market:

Radeon RX 7900 XT:$630(updated 2/6/2026)
Official Launch Price: $899
Ryzen 7 7800X3D:$384(updated 2/6/2026)
Official Launch Price: $449

Combo price: $1014. At 1080p Ultra, this combo delivers 152 FPS, equivalent to 0.15 FPS per dollar.

ResolutionLowMediumHighUltra
1080p0.253 fps/$0.212 fps/$0.166 fps/$0.150 fps/$
1440p0.202 fps/$0.181 fps/$0.147 fps/$0.129 fps/$
4k0.143 fps/$0.125 fps/$0.105 fps/$0.097 fps/$

* Table values represent FPS per Dollar (higher is better)

Performance Limiter Analysis

Ryzen 7 7800X3D|Radeon RX 7900 XT

This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.

📈Analysis

At 1080p high, the Ryzen 7 7800X3D sets the ceiling at about 185 FPS, while the Radeon RX 7900 XT could reach 365 FPS. In this scenario, the CPU limits the GPU potential by 49% (FPS gap: 180 FPS). Overall distribution: CPU limits 8/12 cells, GPU limits 0/12, balanced 4/12.

Verdict

CPU Limits GPU

Your Ryzen 7 7800X3D is the limiting side in the heaviest mismatch. This means part of the Radeon RX 7900 XT rendering potential remains unused in those settings.

🧩Detailed Breakdown
1080p (Full HD)
LowCPU Limits GPU 38%
MediumCPU Limits GPU 46%
HighCPU Limits GPU 49%
UltraCPU Limits GPU 40%
1440p (2K QHD)
LowCPU Limits GPU 20%
MediumCPU Limits GPU 31%
HighCPU Limits GPU 33%
UltraCPU Limits GPU 21%
4K (Ultra HD)
LowBalanced
MediumBalanced
HighBalanced
UltraBalanced
Percentages show how much potential FPS of the stronger component is lost because the other component has a lower FPS ceiling.
🧠Methodology

We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.

Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.

CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.

A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.

Naraka: Bladepoint Requirements Comparison

See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.

CPU - Ryzen 7 7800X3D
cpu icon
34,293
Your Score
MinimumCore i5-4460
RecommendedCore i7-7700
GPU - Radeon RX 7900 XT
gpu icon
28,996
Your Score
MinimumGeForce GTX 750 Ti
RecommendedGeForce GTX 1060

Your CPU is 161% above and your GPU is 188% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.

CPU

+161%vsrecommended

GPU

+188%vsrecommended

CPU

+598%vsminimum

GPU

+643%vsminimum

Minimum Requirements
Video Card: GeForce GTX 750 Ti
Processor: Core i5-4460
Memory: 8 GB
Disk Space: 20 GB
System: Windows 10 64-bit
Recommended Requirements
Video Card: GeForce GTX 1060
Processor: Core i7-7700
Memory: 16 GB
Disk Space: 20 GB (SSD)
System: Windows 10 64-bit

Frequently Asked Questions

1Can the Ryzen 7 7800X3D and Radeon RX 7900 XT run Naraka: Bladepoint well?

Yes, the Ryzen 7 7800X3D paired with the Radeon RX 7900 XT can run Naraka: Bladepoint smoothly up to 4k achieving around 98 FPS at Ultra quality. Your GPU is 188% above the recommended specs, and your CPU is 161% above the recommended requirements.

2Is there a more cost-effective setup to run Naraka: Bladepoint?

This CPU + GPU combo costs approximately $1014 ($384 CPU (Rank #212 Value) + $630 GPU (Rank #60 Value)). Since the CPU is the main limiting factor, investing in a stronger processor will improve your framerates and overall value. For example, the Ryzen 9 9950X is a great upgrade option for around $649 (Rank #5 for value).

3Which component should I upgrade first to improve Naraka: Bladepoint performance?

For Naraka: Bladepoint, upgrading the CPU would have the biggest impact on performance. The Ryzen 7 7800X3D is currently the limiting factor — the Radeon RX 7900 XT has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p high, 1080p low, 1080p medium, 1080p ultra, 1440p high, 1440p low, 1440p medium, 1440p ultra.

4Does this setup support Frame Generation for Naraka: Bladepoint?

Yes! Naraka: Bladepoint supports DLSS Frame Gen and FSR 3 Frame Gen and AFMF, and your Radeon RX 7900 XT is compatible with FSR 3 Frame Gen and AFMF. With Frame Generation enabled, you can expect a 1.5x-2x FPS multiplier on top of native framerates, significantly boosting perceived smoothness.

5What are the minimum and recommended specs for Naraka: Bladepoint?

Naraka: Bladepoint requires at minimum a Core i5-4460 (CPU) and GeForce GTX 750 Ti (GPU) with 8 GB RAM and 20 GB storage. For the recommended experience, you need a Core i7-7700 and GeForce GTX 1060 with 16 GB RAM. Your Ryzen 7 7800X3D and Radeon RX 7900 XT both exceed the recommended specs, so you're well-positioned for a great experience.

6How accurate are these Naraka: Bladepoint FPS estimates for the Ryzen 7 7800X3D and Radeon RX 7900 XT?

These Naraka: Bladepoint FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.

Performance estimates are based on synthetic benchmarks and hardware capabilities.

Results may vary based on drivers, OS, and background processes.