A Source engine sandbox where performance depends entirely on the mods and contraptions you spawn. RAM errors are common on systems with only 4GB.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 65 FPS. At 1440p, all settings exceed 60 FPS. At 4K, frame rates range from 30 to 65 FPS.
The Radeon RX 8050S is 388% above the recommended GPU (GeForce GTX 750) for Garry's Mod. The Ryzen 7 7800X3D is 160% above the recommended CPU (Core i5).
The Radeon RX 8050S sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $784. At 1080p Ultra, this combo delivers 65 FPS, equivalent to 0.08 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.186 fps/$ | 0.144 fps/$ | 0.105 fps/$ | 0.083 fps/$ |
| 1440p | 0.134 fps/$ | 0.108 fps/$ | 0.102 fps/$ | 0.077 fps/$ |
| 4k | 0.083 fps/$ | 0.075 fps/$ | 0.052 fps/$ | 0.038 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k ultra, the Radeon RX 8050S sets the ceiling at about 30 FPS, while the Ryzen 7 7800X3D has headroom up to 290 FPS. In this scenario, the GPU limits the CPU potential by 90% (FPS gap: 260 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your Radeon RX 8050S is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 78% | GPU Limits CPU 82% | GPU Limits CPU 85% | GPU Limits CPU 87% |
| 1440p (2K QHD) | GPU Limits CPU 81% | GPU Limits CPU 85% | GPU Limits CPU 85% | GPU Limits CPU 88% |
| 4K (Ultra HD) | GPU Limits CPU 83% | GPU Limits CPU 84% | GPU Limits CPU 89% | GPU Limits CPU 90% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU11% - 24% <> GPU22% - 40% <> | CPU11% - 24% <> GPU22% - 40% <> | CPU11% - 24% <> GPU22% - 40% <> | CPU0% - 9% <> GPU20% - 42% <> |
| 1440p (2K QHD) | CPU30% - 42% <> GPU15% - 25% <> | CPU30% - 42% <> GPU15% - 25% <> | CPU30% - 42% <> GPU15% - 25% <> | CPU14% - 27% <> GPU13% - 27% <> |
| 4K (Ultra HD) | CPU30% - 42% <> GPU15% - 25% <> | CPU30% - 42% <> GPU15% - 25% <> | CPU30% - 42% <> GPU15% - 25% <> | CPU14% - 27% <> GPU13% - 27% <> |
The Ryzen 7 7800X3D + Radeon RX 8050S pairing runs this title with CPU utilization between 0% and 42% and GPU utilization between 13% and 42%. Ryzen 7 7800X3D keeps significant headroom across presets, while Radeon RX 8050S is utilized efficiently without persistent saturation. As resolution scales, average GPU load rises from 31% at 1080p to 20% at 4K, while CPU averages move from 15% to 32%.
Neither component is close to saturation: CPU tops out at 42% and GPU at 42%. This pattern suggests possible engine-side limits, an FPS cap, or workload constraints unrelated to raw hardware throughput. It also shows why low utilization does not automatically mean there is no FPS limiter.
At 1080p, averages sit around CPU 15% and GPU 31%. At 1440p, that shifts to CPU 32% and GPU 20%, and at 4K it reaches CPU 32% and GPU 20%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
1080p (Full HD) Low is the most balanced preset based on this dataset. It runs around CPU 18% (11-24%) and GPU 31% (22-40%), which keeps Radeon RX 8050S well utilized without constant max-out behavior while Ryzen 7 7800X3D remains stable for consistent frame delivery.
Current utilization does not show an urgent upgrade requirement for either component; the Ryzen 7 7800X3D and Radeon RX 8050S remain reasonably matched for this title.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 160% above and your GPU is 388% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+160%vsrecommended
+388%vsrecommended
+1043%vsminimum
+4799%vsminimum
Yes, the Ryzen 7 7800X3D paired with the Radeon RX 8050S can run Garry's Mod smoothly up to 1440p achieving around 60 FPS at Ultra quality. Your GPU is 388% above the recommended specs, and your CPU is 160% above the recommended requirements.
This CPU + GPU combo costs approximately $784 ($384 CPU (Rank #212 Value) + $400 GPU (Rank #31 Value)). Your build is already very cost-efficient, but if you want even more FPS, the next good option is upgrading the GPU. For example, upgrading to the GeForce GTX 1080 SLI (móvel) (Rank #2 for value) could deliver noticeably better performance.
For Garry's Mod, upgrading the GPU would give you the most noticeable improvement. The Radeon RX 8050S is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Garry's Mod does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Garry's Mod requires at minimum a Pentium 4 (CPU) and GeForce 6 series (GPU) with 4 GB RAM and 5 GB storage. For the recommended experience, you need a Core i5 and GeForce GTX 750 with 8 GB RAM. Your Ryzen 7 7800X3D and Radeon RX 8050S both exceed the recommended specs, so you're well-positioned for a great experience.
These Garry's Mod FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
