This 'Pokémon with guns' survival game runs on Unreal Engine. It is CPU-heavy due to AI simulation for the many creatures. Memory leaks can occur in long sessions, making 16GB of RAM a practical minimum.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, frame rates range from 54 to 118 FPS depending on quality settings. At 1440p, frame rates range from 45 to 87 FPS. At 4K, frame rates range from 21 to 43 FPS.
The Radeon RX 9060 is 6% above the recommended GPU (GeForce RTX 2070) for Palworld. The Ryzen 7 7800X3D is 53% above the recommended CPU (Core i9-9900K).
Palworld supports: AFMF. The Radeon RX 9060 can use AFMF, providing up to 1.5x-2x frame rate boost.
The Radeon RX 9060 sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $633. At 1080p Ultra, this combo delivers 54 FPS, equivalent to 0.09 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.186 fps/$ | 0.137 fps/$ | 0.112 fps/$ | 0.085 fps/$ |
| 1440p | 0.137 fps/$ | 0.098 fps/$ | 0.088 fps/$ | 0.071 fps/$ |
| 4k | 0.068 fps/$ | 0.049 fps/$ | 0.043 fps/$ | 0.033 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k medium, the Radeon RX 9060 sets the ceiling at about 31 FPS, while the Ryzen 7 7800X3D has headroom up to 151 FPS. In this scenario, the GPU limits the CPU potential by 79% (FPS gap: 120 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your Radeon RX 9060 is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 62% | GPU Limits CPU 68% | GPU Limits CPU 68% | GPU Limits CPU 72% |
| 1440p (2K QHD) | GPU Limits CPU 69% | GPU Limits CPU 76% | GPU Limits CPU 75% | GPU Limits CPU 77% |
| 4K (Ultra HD) | GPU Limits CPU 74% | GPU Limits CPU 79% | GPU Limits CPU 79% | GPU Limits CPU 79% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 53% above and your GPU is 6% above the recommended specs. High/Ultra at 1080p. Lower settings for higher resolutions.
+53%vsrecommended
+6%vsrecommended
+344%vsminimum
+240%vsminimum
The Ryzen 7 7800X3D and Radeon RX 9060 will struggle to run Palworld at smooth framerates. At 1080p Ultra, you can expect around 54 FPS which is classified as "playable". Consider lowering settings or upgrading your hardware.
This CPU + GPU combo costs approximately $633 ($384 CPU (Rank #212 Value) + $249 GPU (Rank #4 Value)). Your build is already very cost-efficient, but if you want even more FPS, the next good option is upgrading the GPU. For example, upgrading to the GeForce RTX 3070 for around $499 (Rank #16 for value) could deliver noticeably better performance.
For Palworld, upgrading the GPU would give you the most noticeable improvement. The Radeon RX 9060 is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p high, 1080p low, 1080p medium, 1080p ultra, 1440p high, 1440p low, 1440p medium, 1440p ultra, 4k high, 4k low, 4k medium, 4k ultra.
Yes! Palworld supports AFMF, and your Radeon RX 9060 is compatible with AFMF. With Frame Generation enabled, you can expect a 1.5x-2x FPS multiplier on top of native framerates, significantly boosting perceived smoothness.
Palworld requires at minimum a Core i5-3570K (CPU) and GeForce GTX 1050 (GPU) with 16 GB RAM and 40 GB (SSD) storage. For the recommended experience, you need a Core i9-9900K and GeForce RTX 2070 with 32 GB RAM. Your Ryzen 7 7800X3D and Radeon RX 9060 both exceed the recommended specs, so you're well-positioned for a great experience.
These Palworld FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
