Unlike shooters, Naraka focuses on melee combat with fluid animations. The game is visually dense and supports DLSS, which is vital for high frame rates at resolutions above 1080p. An SSD is critical for map loading, and 16GB of RAM is recommended for smooth gameplay.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 89 FPS. At 1440p, all settings exceed 76 FPS. At 4K, all settings exceed 72 FPS.
The Radeon RX 9070 GRE is 143% above the recommended GPU (GeForce GTX 1060) for Naraka: Bladepoint. The Ryzen 7 7800X3D is 161% above the recommended CPU (Core i7-7700).
Naraka: Bladepoint supports: DLSS Frame Gen, FSR 3 Frame Gen, AFMF. The Radeon RX 9070 GRE can use FSR 3 Frame Gen and AFMF, providing up to 1.5x-2x frame rate boost.
At lower resolutions (1080p (medium/high)), the Ryzen 7 7800X3D sets the FPS ceiling. As graphical load increases at (all 1440p settings, all 4k settings), the Radeon RX 9070 GRE becomes the FPS-limiting side. The FPS ceiling is closely matched at 1080p (low/ultra).
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k low, the Radeon RX 9070 GRE sets the ceiling at about 121 FPS, while the Ryzen 7 7800X3D has headroom up to 171 FPS. In this scenario, the GPU limits the CPU potential by 29% (FPS gap: 50 FPS). Overall distribution: GPU limits 8/12 cells, CPU limits 2/12, balanced 2/12.
Your Radeon RX 9070 GRE is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | Balanced | CPU Limits GPU 11% | CPU Limits GPU 15% | Balanced |
| 1440p (2K QHD) | GPU Limits CPU 20% | GPU Limits CPU 15% | GPU Limits CPU 11% | GPU Limits CPU 27% |
| 4K (Ultra HD) | GPU Limits CPU 29% | GPU Limits CPU 26% | GPU Limits CPU 23% | GPU Limits CPU 28% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 161% above and your GPU is 143% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+161%vsrecommended
+143%vsrecommended
+598%vsminimum
+526%vsminimum
Yes, the Ryzen 7 7800X3D paired with the Radeon RX 9070 GRE can run Naraka: Bladepoint smoothly up to 4k achieving around 72 FPS at Ultra quality. Your GPU is 143% above the recommended specs, and your CPU is 161% above the recommended requirements.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
For Naraka: Bladepoint, upgrading the GPU would give you the most noticeable improvement. The Radeon RX 9070 GRE is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1440p high, 1440p low, 1440p medium, 1440p ultra, 4k high, 4k low, 4k medium, 4k ultra. CPU-limited at: 1080p high, 1080p medium.
Yes! Naraka: Bladepoint supports DLSS Frame Gen and FSR 3 Frame Gen and AFMF, and your Radeon RX 9070 GRE is compatible with FSR 3 Frame Gen and AFMF. With Frame Generation enabled, you can expect a 1.5x-2x FPS multiplier on top of native framerates, significantly boosting perceived smoothness.
Naraka: Bladepoint requires at minimum a Core i5-4460 (CPU) and GeForce GTX 750 Ti (GPU) with 8 GB RAM and 20 GB storage. For the recommended experience, you need a Core i7-7700 and GeForce GTX 1060 with 16 GB RAM. Your Ryzen 7 7800X3D and Radeon RX 9070 GRE both exceed the recommended specs, so you're well-positioned for a great experience.
These Naraka: Bladepoint FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
