A competitor to Overwatch featuring environmental destruction, which makes it CPU heavy. DX12 and 12GB of RAM are the minimum requirements.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 142 FPS. At 1440p, all settings exceed 101 FPS. At 4K, frame rates range from 51 to 89 FPS.
The Radeon RX 9070 is 54% above the recommended GPU (GeForce RTX 2060 Super) for Marvel Rivals. The Ryzen 7 7800X3D is 57% above the recommended CPU (Core i5-10400).
Marvel Rivals supports: DLSS Frame Gen, FSR 3 Frame Gen, AFMF. The Radeon RX 9070 can use FSR 3 Frame Gen and AFMF, providing up to 1.5x-2x frame rate boost.
The Radeon RX 9070 sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $934. At 1080p Ultra, this combo delivers 142 FPS, equivalent to 0.15 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.307 fps/$ | 0.215 fps/$ | 0.176 fps/$ | 0.152 fps/$ |
| 1440p | 0.185 fps/$ | 0.137 fps/$ | 0.115 fps/$ | 0.108 fps/$ |
| 4k | 0.095 fps/$ | 0.069 fps/$ | 0.064 fps/$ | 0.055 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k medium, the Radeon RX 9070 sets the ceiling at about 72 FPS, while the Ryzen 7 7800X3D has headroom up to 174 FPS. In this scenario, the GPU limits the CPU potential by 59% (FPS gap: 102 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your Radeon RX 9070 is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 46% | GPU Limits CPU 56% | GPU Limits CPU 53% | GPU Limits CPU 49% |
| 1440p (2K QHD) | GPU Limits CPU 48% | GPU Limits CPU 57% | GPU Limits CPU 57% | GPU Limits CPU 55% |
| 4K (Ultra HD) | GPU Limits CPU 50% | GPU Limits CPU 59% | GPU Limits CPU 58% | GPU Limits CPU 56% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU29% - 79% <> GPU71% - 88% <> | CPU29% - 78% <> GPU80% - 95% <> | CPU29% - 78% <> GPU80% - 95% <> | CPU32% - 80% <> GPU76% - 93% <> |
| 1440p (2K QHD) | CPU22% - 69% <> GPU84% - 95% <> | CPU22% - 69% <> GPU93% - 100% <> | CPU22% - 69% <> GPU93% - 100% <> | CPU21% - 69% <> GPU93% - 100% <> |
| 4K (Ultra HD) | CPU14% - 50% <> GPU84% - 95% <> | CPU14% - 50% <> GPU94% - 100% <> | CPU14% - 50% <> GPU94% - 100% <> | CPU14% - 49% <> GPU94% - 100% <> |
The Ryzen 7 7800X3D + Radeon RX 9070 pairing runs this title with CPU utilization between 14% and 80% and GPU utilization between 71% and 100%. Ryzen 7 7800X3D keeps significant headroom across presets, while Radeon RX 9070 carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 85% at 1080p to 95% at 4K, while CPU averages move from 55% to 32%.
From a utilization perspective, this is a GPU-heavy load profile. At 4K (Ultra HD) Medium, the Radeon RX 9070 averages 97% usage (94-100%), while the Ryzen 7 7800X3D stays at 32% (14-50%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.
At 1080p, averages sit around CPU 55% and GPU 85%. At 1440p, that shifts to CPU 46% and GPU 95%, and at 4K it reaches CPU 32% and GPU 95%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
1080p (Full HD) Medium is the most balanced preset based on this dataset. It runs around CPU 54% (29-78%) and GPU 88% (80-95%), which keeps Radeon RX 9070 well utilized without constant max-out behavior while Ryzen 7 7800X3D remains stable for consistent frame delivery.
Upgrade priority should be the GPU. The Radeon RX 9070 reaches 97% average load at 4K (Ultra HD) Medium while the Ryzen 7 7800X3D still has headroom, so a faster graphics card would deliver the largest uplift.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 57% above and your GPU is 54% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+57%vsrecommended
+54%vsrecommended
+164%vsminimum
+152%vsminimum
Yes, the Ryzen 7 7800X3D paired with the Radeon RX 9070 can run Marvel Rivals smoothly up to 1440p achieving around 101 FPS at Ultra quality. Your GPU is 54% above the recommended specs, and your CPU is 57% above the recommended requirements.
This CPU + GPU combo costs approximately $934 ($384 CPU (Rank #212 Value) + $550 GPU (Rank #59 Value)). Your Radeon RX 9070 provides phenomenal top-tier performance but at a premium enthusiast price. Since you are essentially at the ceiling of current hardware capabilities, there are no meaningful performance upgrades available. However, if you wanted a more cost-effective build that still delivers a great experience, you could theoretically step down to a high-end card with a significantly better value rating. For example, upgrading to the GeForce RTX 4080 for around $1199 (Rank #61 for value) could deliver noticeably better performance.
Your Radeon RX 9070 is already a top-tier graphics card. While it's technically the limiting factor here (which means you are fully utilizing your GPU's visual horsepower exactly as intended), there is no meaningful upgrade path that would drastically improve your Marvel Rivals performance right now. GPU fully utilized at: 1080p high, 1080p low, 1080p medium, 1080p ultra, 1440p high, 1440p low, 1440p medium, 1440p ultra, 4k high, 4k low, 4k medium, 4k ultra.
Yes! Marvel Rivals supports DLSS Frame Gen and FSR 3 Frame Gen and AFMF, and your Radeon RX 9070 is compatible with FSR 3 Frame Gen and AFMF. With Frame Generation enabled, you can expect a 1.5x-2x FPS multiplier on top of native framerates, significantly boosting perceived smoothness.
Marvel Rivals requires at minimum a Core i5-6600K (CPU) and GeForce GTX 1060 (GPU) with 12 GB RAM and 70 GB storage. For the recommended experience, you need a Core i5-10400 and GeForce RTX 2060 Super with 16 GB RAM. Your Ryzen 7 7800X3D and Radeon RX 9070 both exceed the recommended specs, so you're well-positioned for a great experience.
These Marvel Rivals FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
