This extraction shooter bets on visual fidelity with UE5 and DX12, requiring AVX2 support. It uses volumetric lighting and dense effects, with a recommended baseline of RTX 2070 / RX 5700 XT, indicating it is a demanding title.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, frame rates range from 24 to 55 FPS depending on quality settings. At 1440p, frame rates range from 21 to 46 FPS. At 4K, frame rates range from 13 to 27 FPS.
The Radeon RX590 GME is 5% below minimum GPU requirement for ARC Raiders. The Ryzen 7 7800X3D is 94% above the recommended CPU (Core i5-9600K).
ARC Raiders supports: DLSS Frame Gen, FSR 3 Frame Gen, AFMF. The Radeon RX590 GME can use FSR 3 Frame Gen and AFMF, providing up to 1.5x-2x frame rate boost.
The Radeon RX590 GME sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $499. At 1080p Ultra, this combo delivers 24 FPS, equivalent to 0.05 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.110 fps/$ | 0.096 fps/$ | 0.068 fps/$ | 0.048 fps/$ |
| 1440p | 0.092 fps/$ | 0.084 fps/$ | 0.060 fps/$ | 0.042 fps/$ |
| 4k | 0.054 fps/$ | 0.054 fps/$ | 0.036 fps/$ | 0.026 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k ultra, the Radeon RX590 GME sets the ceiling at about 13 FPS, while the Ryzen 7 7800X3D has headroom up to 128 FPS. In this scenario, the GPU limits the CPU potential by 90% (FPS gap: 115 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your Radeon RX590 GME is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 77% | GPU Limits CPU 78% | GPU Limits CPU 81% | GPU Limits CPU 84% |
| 1440p (2K QHD) | GPU Limits CPU 82% | GPU Limits CPU 83% | GPU Limits CPU 86% | GPU Limits CPU 88% |
| 4K (Ultra HD) | GPU Limits CPU 85% | GPU Limits CPU 86% | GPU Limits CPU 88% | GPU Limits CPU 90% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your hardware is below minimum requirements. GPU is the limiting factor (5% below minimum). Expect performance issues. Low settings recommended.
+94%vsrecommended
-48%vsrecommended
+180%vsminimum
-5%vsminimum
The Ryzen 7 7800X3D and Radeon RX590 GME will struggle to run ARC Raiders at smooth framerates. At 1080p Ultra, you can expect around 24 FPS which is classified as "struggling". Consider lowering settings or upgrading your hardware.
This CPU + GPU combo costs approximately $499 ($384 CPU (Rank #212 Value) + $115 GPU (Rank #19 Value)). Your build is already very cost-efficient, but if you want even more FPS, the next good option is upgrading the GPU. For example, upgrading to the GeForce RTX 5060 for around $299 (Rank #2 for value) could deliver noticeably better performance.
For ARC Raiders, upgrading the GPU would give you the most noticeable improvement. The Radeon RX590 GME is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p high, 1080p low, 1080p medium, 1080p ultra, 1440p high, 1440p low, 1440p medium, 1440p ultra, 4k high, 4k low, 4k medium, 4k ultra.
Yes! ARC Raiders supports DLSS Frame Gen and FSR 3 Frame Gen and AFMF, and your Radeon RX590 GME is compatible with FSR 3 Frame Gen and AFMF. With Frame Generation enabled, you can expect a 1.5x-2x FPS multiplier on top of native framerates, significantly boosting perceived smoothness.
ARC Raiders requires at minimum a Core i5-6600K (CPU) and GeForce GTX 1050 Ti (GPU) with 12 GB RAM and 35 GB storage. For the recommended experience, you need a Core i5-9600K and GeForce RTX 2070 with 16 GB RAM. Your hardware falls below the minimum requirements for this game, which may result in poor performance.
These ARC Raiders FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
