Returning to compete with Battlefield, Delta Force uses a modern engine featuring environmental destruction. While minimum requirements are accessible (GTX 960), competitive settings scale up to require GTX 10/RTX 20 series GPUs and 16GB of RAM for the best experience.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, frame rates range from 55 to 97 FPS depending on quality settings. At 1440p, frame rates range from 43 to 59 FPS. At 4K, frame rates range from 24 to 41 FPS.
The Radeon RX590 GME is 9% below recommended, but 36% above minimum for Delta Force. The Ryzen 7 7800X3D is 278% above the recommended CPU (Core i5-6500).
Delta Force supports: DLSS Frame Gen, AFMF. The Radeon RX590 GME can use AFMF, providing up to 1.5x-2x frame rate boost.
The Radeon RX590 GME sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $499. At 1080p Ultra, this combo delivers 55 FPS, equivalent to 0.11 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.194 fps/$ | 0.154 fps/$ | 0.132 fps/$ | 0.110 fps/$ |
| 1440p | 0.118 fps/$ | 0.106 fps/$ | 0.102 fps/$ | 0.086 fps/$ |
| 4k | 0.082 fps/$ | 0.082 fps/$ | 0.066 fps/$ | 0.048 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1440p ultra, the Radeon RX590 GME sets the ceiling at about 40 FPS, while the Ryzen 7 7800X3D has headroom up to 196 FPS. In this scenario, the GPU limits the CPU potential by 80% (FPS gap: 156 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your Radeon RX590 GME is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 60% | GPU Limits CPU 67% | GPU Limits CPU 72% | GPU Limits CPU 78% |
| 1440p (2K QHD) | GPU Limits CPU 73% | GPU Limits CPU 76% | GPU Limits CPU 77% | GPU Limits CPU 80% |
| 4K (Ultra HD) | GPU Limits CPU 74% | GPU Limits CPU 75% | GPU Limits CPU 78% | GPU Limits CPU 80% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 278% below recommended and your GPU is 9% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
+278%vsrecommended
-9%vsrecommended
+729%vsminimum
+36%vsminimum
The Ryzen 7 7800X3D and Radeon RX590 GME will struggle to run Delta Force at smooth framerates. At 1080p Ultra, you can expect around 55 FPS which is classified as "playable". Consider lowering settings or upgrading your hardware.
This CPU + GPU combo costs approximately $499 ($384 CPU (Rank #212 Value) + $115 GPU (Rank #19 Value)). Your build is already very cost-efficient, but if you want even more FPS, the next good option is upgrading the GPU. For example, upgrading to the GeForce RTX 5060 for around $299 (Rank #2 for value) could deliver noticeably better performance.
For Delta Force, upgrading the GPU would give you the most noticeable improvement. The Radeon RX590 GME is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p high, 1080p low, 1080p medium, 1080p ultra, 1440p high, 1440p low, 1440p medium, 1440p ultra, 4k high, 4k low, 4k medium, 4k ultra.
Yes! Delta Force supports DLSS Frame Gen and AFMF, and your Radeon RX590 GME is compatible with AFMF. With Frame Generation enabled, you can expect a 1.5x-2x FPS multiplier on top of native framerates, significantly boosting perceived smoothness.
Delta Force requires at minimum a Core i3-4150 (CPU) and GeForce GTX 960 (GPU) with 12 GB RAM and 50 GB storage. For the recommended experience, you need a Core i5-6500 and GeForce GTX 1060 5GB with 16 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Delta Force FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
