A heavy RE Engine title using advanced geometry and global illumination. It has sparked discussion by listing Frame Generation as a requirement for 60 FPS in its recommended specs. An SSD is mandatory.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, frame rates range from 41 to 101 FPS depending on quality settings. At 1440p, frame rates range from 29 to 63 FPS. At 4K, frame rates range from 20 to 36 FPS.
The RTX A2000 Embedded GPU is 17% below minimum GPU requirement for Monster Hunter Wilds. The Ryzen 7 7800X3D is 76% above the recommended CPU (Core i5-11600K).
The RTX A2000 Embedded GPU sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1440p ultra, the RTX A2000 Embedded GPU sets the ceiling at about 29 FPS, while the Ryzen 7 7800X3D has headroom up to 99 FPS. In this scenario, the GPU limits the CPU potential by 71% (FPS gap: 70 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your RTX A2000 Embedded GPU is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 51% | GPU Limits CPU 59% | GPU Limits CPU 57% | GPU Limits CPU 65% |
| 1440p (2K QHD) | GPU Limits CPU 58% | GPU Limits CPU 62% | GPU Limits CPU 64% | GPU Limits CPU 71% |
| 4K (Ultra HD) | GPU Limits CPU 61% | GPU Limits CPU 64% | GPU Limits CPU 66% | GPU Limits CPU 69% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU56% - 66% <> GPU54% - 75% <> | CPU59% - 72% <> GPU65% - 86% <> | CPU35% - 58% <> GPU92% - 98% <> | CPU37% - 58% <> GPU92% - 98% <> |
| 1440p (2K QHD) | CPU34% - 48% <> GPU59% - 79% <> | CPU37% - 54% <> GPU73% - 91% <> | CPU24% - 48% <> GPU96% - 100% <> | CPU28% - 47% <> GPU96% - 99% <> |
| 4K (Ultra HD) | CPU31% - 41% <> GPU59% - 79% <> | CPU33% - 46% <> GPU74% - 91% <> | CPU21% - 41% <> GPU97% - 100% <> | CPU24% - 41% <> GPU97% - 100% <> |
The Ryzen 7 7800X3D + RTX A2000 Embedded GPU pairing runs this title with CPU utilization between 21% and 72% and GPU utilization between 54% and 100%. Ryzen 7 7800X3D stays in a controlled operating range, while RTX A2000 Embedded GPU carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 83% at 1080p to 87% at 4K, while CPU averages move from 55% to 35%.
From a utilization perspective, this is a GPU-heavy load profile. At 1440p (2K QHD) High, the RTX A2000 Embedded GPU averages 98% usage (96-100%), while the Ryzen 7 7800X3D stays at 36% (24-48%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.
At 1080p, averages sit around CPU 55% and GPU 83%. At 1440p, that shifts to CPU 40% and GPU 87%, and at 4K it reaches CPU 35% and GPU 87%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
1440p (2K QHD) Medium is the most balanced preset based on this dataset. It runs around CPU 46% (37-54%) and GPU 82% (73-91%), which keeps RTX A2000 Embedded GPU well utilized without constant max-out behavior while Ryzen 7 7800X3D remains stable for consistent frame delivery.
Upgrade priority should be the GPU. The RTX A2000 Embedded GPU reaches 98% average load at 1440p (2K QHD) High while the Ryzen 7 7800X3D still has headroom, so a faster graphics card would deliver the largest uplift.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your hardware is below minimum requirements. GPU is the limiting factor (17% below minimum). Expect performance issues. Low settings recommended.
+76%vsrecommended
-44%vsrecommended
+94%vsminimum
-17%vsminimum
The Ryzen 7 7800X3D and RTX A2000 Embedded GPU will struggle to run Monster Hunter Wilds at smooth framerates. At 1080p Ultra, you can expect around 41 FPS which is classified as "playable". Consider lowering settings or upgrading your hardware.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
For Monster Hunter Wilds, upgrading the GPU would give you the most noticeable improvement. The RTX A2000 Embedded GPU is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Monster Hunter Wilds does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Monster Hunter Wilds requires at minimum a Core i5-10600 (CPU) and GeForce GTX 1660 Super (GPU) with 16 GB RAM and 140 GB (SSD) storage. For the recommended experience, you need a Core i5-11600K and GeForce RTX 2070 Super with 16 GB RAM. Your hardware falls below the minimum requirements for this game, which may result in poor performance.
These Monster Hunter Wilds FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
