Unlike shooters, Naraka focuses on melee combat with fluid animations. The game is visually dense and supports DLSS, which is vital for high frame rates at resolutions above 1080p. An SSD is critical for map loading, and 16GB of RAM is recommended for smooth gameplay.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 74 FPS. At 1440p, frame rates range from 59 to 151 FPS. At 4K, frame rates range from 37 to 84 FPS.
The RTX A2000 Embedded GPU is 10% above the recommended GPU (GeForce GTX 1060) for Naraka: Bladepoint. The Ryzen 7 7800X3D is 161% above the recommended CPU (Core i7-7700).
The RTX A2000 Embedded GPU sets the FPS ceiling at 1080p ultra, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom. The FPS ceiling is closely matched at 1080p (low/medium/high).
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k ultra, the RTX A2000 Embedded GPU sets the ceiling at about 45 FPS, while the Ryzen 7 7800X3D has headroom up to 115 FPS. In this scenario, the GPU limits the CPU potential by 61% (FPS gap: 70 FPS). Overall distribution: GPU limits 9/12 cells, CPU limits 0/12, balanced 3/12.
Your RTX A2000 Embedded GPU is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | Balanced | Balanced | Balanced | GPU Limits CPU 30% |
| 1440p (2K QHD) | GPU Limits CPU 20% | GPU Limits CPU 19% | GPU Limits CPU 24% | GPU Limits CPU 46% |
| 4K (Ultra HD) | GPU Limits CPU 45% | GPU Limits CPU 50% | GPU Limits CPU 53% | GPU Limits CPU 61% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU57% - 74% <> GPU65% - 84% <> | CPU57% - 74% <> GPU65% - 84% <> | CPU19% - 42% <> GPU85% - 99% <> | CPU18% - 44% <> GPU87% - 100% <> |
| 1440p (2K QHD) | CPU56% - 71% <> GPU62% - 83% <> | CPU56% - 71% <> GPU62% - 83% <> | CPU13% - 38% <> GPU87% - 98% <> | CPU13% - 39% <> GPU89% - 99% <> |
| 4K (Ultra HD) | CPU55% - 66% <> GPU62% - 83% <> | CPU55% - 66% <> GPU62% - 83% <> | CPU11% - 34% <> GPU85% - 98% <> | CPU5% - 29% <> GPU87% - 99% <> |
The Ryzen 7 7800X3D + RTX A2000 Embedded GPU pairing runs this title with CPU utilization between 5% and 74% and GPU utilization between 62% and 100%. Ryzen 7 7800X3D stays in a controlled operating range, while RTX A2000 Embedded GPU carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 84% at 1080p to 82% at 4K, while CPU averages move from 48% to 40%.
From a utilization perspective, this is a GPU-heavy load profile. At 1080p (Full HD) Ultra, the RTX A2000 Embedded GPU averages 94% usage (87-100%), while the Ryzen 7 7800X3D stays at 31% (18-44%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.
At 1080p, averages sit around CPU 48% and GPU 84%. At 1440p, that shifts to CPU 45% and GPU 83%, and at 4K it reaches CPU 40% and GPU 82%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
1080p (Full HD) High is the most balanced preset based on this dataset. It runs around CPU 30% (19-42%) and GPU 92% (85-99%), which keeps RTX A2000 Embedded GPU well utilized without constant max-out behavior while Ryzen 7 7800X3D remains stable for consistent frame delivery.
Current utilization does not show an urgent upgrade requirement for either component; the Ryzen 7 7800X3D and RTX A2000 Embedded GPU remain reasonably matched for this title.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 161% above and your GPU is 10% above the recommended specs. High/Ultra at 1080p. Lower settings for higher resolutions.
+161%vsrecommended
+10%vsrecommended
+598%vsminimum
+185%vsminimum
Yes, the Ryzen 7 7800X3D paired with the RTX A2000 Embedded GPU can run Naraka: Bladepoint smoothly up to 1080p achieving around 74 FPS at Ultra quality. Your GPU is 10% above the recommended specs, and your CPU is 161% above the recommended requirements.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
For Naraka: Bladepoint, upgrading the GPU would give you the most noticeable improvement. The RTX A2000 Embedded GPU is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Naraka: Bladepoint does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Naraka: Bladepoint requires at minimum a Core i5-4460 (CPU) and GeForce GTX 750 Ti (GPU) with 8 GB RAM and 20 GB storage. For the recommended experience, you need a Core i7-7700 and GeForce GTX 1060 with 16 GB RAM. Your Ryzen 7 7800X3D and RTX A2000 Embedded GPU both exceed the recommended specs, so you're well-positioned for a great experience.
These Naraka: Bladepoint FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
