Optimized for mobile roots, the PC version offers higher resolution textures and volumetric shadows while keeping minimum specs low. It is light on the CPU but requires a dedicated GPU for stable 1080p/60FPS gameplay.
This game has a built-in FPS cap of 60 FPS
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, frame rates range from 46 to 53 FPS depending on quality settings. At 1440p, frame rates range from 43 to 52 FPS. At 4K, frame rates range from 42 to 56 FPS.
The RTX A2000 Mobile is 6% below recommended, but 229% above minimum for Genshin Impact. The Ryzen 7 7800X3D is 0% above the recommended CPU (Core i7).
The Ryzen 7 7800X3D sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the RTX A2000 Mobile still has headroom.
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1080p high, the Ryzen 7 7800X3D sets the ceiling at about 59 FPS, while the RTX A2000 Mobile could reach 122 FPS. In this scenario, the CPU limits the GPU potential by 52% (FPS gap: 63 FPS). Overall distribution: CPU limits 12/12 cells, GPU limits 0/12, balanced 0/12.
Your Ryzen 7 7800X3D is the limiting side in the heaviest mismatch. This means part of the RTX A2000 Mobile rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 48% | CPU Limits GPU 49% | CPU Limits GPU 52% | CPU Limits GPU 46% |
| 1440p (2K QHD) | CPU Limits GPU 35% | CPU Limits GPU 34% | CPU Limits GPU 37% | CPU Limits GPU 30% |
| 4K (Ultra HD) | CPU Limits GPU 26% | CPU Limits GPU 24% | CPU Limits GPU 22% | CPU Limits GPU 18% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU10% - 20% <> GPU31% - 42% <> | CPU10% - 20% <> GPU31% - 42% <> | CPU10% - 20% <> GPU31% - 42% <> | CPU0% - 7% <> GPU33% - 42% <> |
| 1440p (2K QHD) | CPU10% - 20% <> GPU39% - 58% <> | CPU10% - 20% <> GPU39% - 58% <> | CPU10% - 20% <> GPU39% - 58% <> | CPU1% - 7% <> GPU42% - 58% <> |
| 4K (Ultra HD) | CPU11% - 23% <> GPU53% - 66% <> | CPU11% - 23% <> GPU53% - 66% <> | CPU11% - 23% <> GPU53% - 66% <> | CPU1% - 11% <> GPU55% - 66% <> |
The Ryzen 7 7800X3D + RTX A2000 Mobile pairing runs this title with CPU utilization between 0% and 23% and GPU utilization between 31% and 66%. Ryzen 7 7800X3D keeps significant headroom across presets, while RTX A2000 Mobile is utilized efficiently without persistent saturation. As resolution scales, average GPU load rises from 37% at 1080p to 60% at 4K, while CPU averages move from 12% to 14%.
The utilization pattern is relatively even. The RTX A2000 Mobile reaches 60% average at its highest-load preset, while the Ryzen 7 7800X3D peaks at 17% average. This suggests a fairly controlled load distribution, but the actual FPS-limiting side should still be read from the limiter analysis above.
At 1080p, averages sit around CPU 12% and GPU 37%. At 1440p, that shifts to CPU 12% and GPU 49%, and at 4K it reaches CPU 14% and GPU 60%. This shows that GPU demand scales sharply with resolution while CPU load remains comparatively stable.
4K (Ultra HD) Low is the most balanced preset based on this dataset. It runs around CPU 17% (11-23%) and GPU 60% (53-66%), which keeps RTX A2000 Mobile well utilized without constant max-out behavior while Ryzen 7 7800X3D remains stable for consistent frame delivery.
Current utilization does not show an urgent upgrade requirement for either component; the Ryzen 7 7800X3D and RTX A2000 Mobile remain reasonably matched for this title.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 0% below recommended and your GPU is 6% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
+0%vsrecommended
-6%vsrecommended
+160%vsminimum
+229%vsminimum
The Ryzen 7 7800X3D and RTX A2000 Mobile will struggle to run Genshin Impact at smooth framerates. At 1080p Ultra, you can expect around 46 FPS which is classified as "playable". Consider lowering settings or upgrading your hardware.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
For Genshin Impact, upgrading the CPU would have the biggest impact on performance. The Ryzen 7 7800X3D is currently the limiting factor — the RTX A2000 Mobile has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Genshin Impact does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Genshin Impact requires at minimum a Core i5 (CPU) and GeForce GT 1030 (GPU) with 8 GB RAM and 100 GB storage. For the recommended experience, you need a Core i7 and GeForce GTX 1060 with 16 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Genshin Impact FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
