This 'Pokémon with guns' survival game runs on Unreal Engine. It is CPU-heavy due to AI simulation for the many creatures. Memory leaks can occur in long sessions, making 16GB of RAM a practical minimum.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 72 FPS. At 1440p, all settings exceed 66 FPS. At 4K, frame rates range from 30 to 63 FPS.
The RTX A2000 is 17% below recommended, but 168% above minimum for Palworld. The Ryzen 7 7800X3D is 53% above the recommended CPU (Core i9-9900K).
The RTX A2000 determines the performance ceiling at all 1080p settings, all 1440p settings, all 4k settings, executing at maximum capacity.
Approximated average price on current market:
Combo price: $704. At 1080p Ultra, this combo delivers 72 FPS, equivalent to 0.1 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.210 fps/$ | 0.155 fps/$ | 0.135 fps/$ | 0.102 fps/$ |
| 1440p | 0.162 fps/$ | 0.122 fps/$ | 0.116 fps/$ | 0.094 fps/$ |
| 4k | 0.089 fps/$ | 0.065 fps/$ | 0.057 fps/$ | 0.043 fps/$ |
* Table values represent FPS per Dollar (higher is better)
At 4k ultra, the RTX A2000 sets the ceiling at about 28 FPS, while the Ryzen 7 7800X3D has headroom up to 100 FPS. In this scenario, the GPU limits the CPU potential by 72% (FPS gap: 72 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your RTX A2000 is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 54% | GPU Limits CPU 62% | GPU Limits CPU 59% | GPU Limits CPU 65% |
| 1440p (2K QHD) | GPU Limits CPU 63% | GPU Limits CPU 68% | GPU Limits CPU 65% | GPU Limits CPU 68% |
| 4K (Ultra HD) | GPU Limits CPU 66% | GPU Limits CPU 71% | GPU Limits CPU 70% | GPU Limits CPU 72% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 53% below recommended and your GPU is 17% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
+53%vsrecommended
-17%vsrecommended
+344%vsminimum
+168%vsminimum
Yes, the Ryzen 7 7800X3D paired with the RTX A2000 can run Palworld smoothly up to 1440p achieving around 66 FPS at Ultra quality. Your GPU is 17% below the recommended specs, and your CPU is 53% above the recommended requirements.
This CPU + GPU combo costs approximately $704 ($384 CPU (Rank #212 Value) + $320 GPU (Rank #21 Value)). Your build is already very cost-efficient, but if you want even more FPS, the next good option is upgrading the GPU. For example, upgrading to the Quadro RTX 4000 (móvel) for around $900 (Rank #11 for value) could deliver noticeably better performance.
For Palworld, upgrading the GPU would give you the most noticeable improvement. The RTX A2000 is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Palworld does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Palworld requires at minimum a Core i5-3570K (CPU) and GeForce GTX 1050 (GPU) with 16 GB RAM and 40 GB (SSD) storage. For the recommended experience, you need a Core i9-9900K and GeForce RTX 2070 with 32 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Palworld FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
