Stardew ValleyFPS onRyzen 7 7800X3D&RTX A4500 Embedded GPU

Stardew Valley

Extremely accessible and runs on almost anything. It is single-threaded with negligible GPU load. However, installing many mods can increase RAM usage to 2-4GB.

This game has a built-in FPS cap of 60 FPS

Stardew Valley - FPS Estimates by Resolution

Actual FPS may vary based on RAM speed, background processes, and other system factors

1080P
low60 FPS
medium60 FPS
high60 FPS
ultra60 FPS
1440P
low60 FPS
medium60 FPS
high60 FPS
ultra60 FPS
4K
low60 FPS
medium60 FPS
high60 FPS
ultra60 FPS

Performance Report

Stardew Valley

RTX A4500 Embedded GPU + Ryzen 7 7800X3D
🎮Visual Experience

At 1080p, all quality settings exceed 134 FPS. At 1440p, all settings exceed 64 FPS. At 4K, all settings exceed 62 FPS.

Official Requirements

The RTX A4500 Embedded GPU is 273% above the recommended GPU (GeForce GTX 460) for Stardew Valley. The Ryzen 7 7800X3D is 160% above the recommended CPU (Core i3).

⚙️FPS Ceiling Analysis

The RTX A4500 Embedded GPU sets the FPS ceiling at all 1080p settings, 1440p (low/medium/high), 4k (low/medium/high), while the Ryzen 7 7800X3D still has additional frame-generation headroom. The FPS ceiling is closely matched at 1440p ultra, 4k ultra.

Performance Limiter Analysis

Ryzen 7 7800X3D|RTX A4500 Embedded GPU

This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.

📈Analysis

At 1080p medium, the RTX A4500 Embedded GPU sets the ceiling at about 78 FPS, while the Ryzen 7 7800X3D has headroom up to 455 FPS. In this scenario, the GPU limits the CPU potential by 83% (FPS gap: 377 FPS). Overall distribution: GPU limits 10/12 cells, CPU limits 0/12, balanced 2/12.

Verdict

GPU Limits CPU

Your RTX A4500 Embedded GPU is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.

🧩Detailed Breakdown
1080p (Full HD)
LowGPU Limits CPU 82%
MediumGPU Limits CPU 83%
HighGPU Limits CPU 83%
UltraGPU Limits CPU 71%
1440p (2K QHD)
LowGPU Limits CPU 38%
MediumGPU Limits CPU 40%
HighGPU Limits CPU 41%
UltraBalanced
4K (Ultra HD)
LowGPU Limits CPU 30%
MediumGPU Limits CPU 32%
HighGPU Limits CPU 32%
UltraBalanced
Percentages show how much potential FPS of the stronger component is lost because the other component has a lower FPS ceiling.
🧠Methodology

We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.

Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.

CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.

A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.

📊Predicted Hardware Utilization for Ryzen 7 7800X3D and RTX A4500 Embedded GPU

1080p (Full HD)

Low
CPU8% - 21%
<>
GPU4% - 13%
<>
Medium
CPU8% - 21%
<>
GPU4% - 13%
<>
High
CPU8% - 21%
<>
GPU4% - 13%
<>
Ultra
CPU2% - 11%
<>
GPU5% - 13%
<>

1440p (2K QHD)

Low
CPU7% - 19%
<>
GPU9% - 24%
<>
Medium
CPU7% - 19%
<>
GPU9% - 24%
<>
High
CPU7% - 19%
<>
GPU9% - 24%
<>
Ultra
CPU2% - 11%
<>
GPU9% - 23%
<>

4K (Ultra HD)

Low
CPU7% - 19%
<>
GPU14% - 31%
<>
Medium
CPU7% - 19%
<>
GPU14% - 31%
<>
High
CPU7% - 19%
<>
GPU14% - 31%
<>
Ultra
CPU2% - 11%
<>
GPU14% - 31%
<>

Performance Summary

The Ryzen 7 7800X3D + RTX A4500 Embedded GPU pairing runs this title with CPU utilization between 2% and 21% and GPU utilization between 4% and 31%. Ryzen 7 7800X3D keeps significant headroom across presets, while RTX A4500 Embedded GPU is utilized efficiently without persistent saturation. As resolution scales, average GPU load rises from 8% at 1080p to 22% at 4K, while CPU averages move from 12% to 11%.

Load Interpretation

Neither component is close to saturation: CPU tops out at 21% and GPU at 31%. This pattern suggests possible engine-side limits, an FPS cap, or workload constraints unrelated to raw hardware throughput. It also shows why low utilization does not automatically mean there is no FPS limiter.

Resolution Scaling

At 1080p, averages sit around CPU 12% and GPU 8%. At 1440p, that shifts to CPU 11% and GPU 16%, and at 4K it reaches CPU 11% and GPU 22%. This shows that GPU demand scales sharply with resolution while CPU load remains comparatively stable.

Optimal Settings Recommendation

4K (Ultra HD) Low is the most balanced preset based on this dataset. It runs around CPU 13% (7-19%) and GPU 22% (14-31%), which keeps RTX A4500 Embedded GPU well utilized without constant max-out behavior while Ryzen 7 7800X3D remains stable for consistent frame delivery.

Upgrade Insight

Current utilization does not show an urgent upgrade requirement for either component; the Ryzen 7 7800X3D and RTX A4500 Embedded GPU remain reasonably matched for this title.

Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.

Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.

  • High GPU Load: You typically want to see High GPU Utilization (90%+) and moderate CPU usage when visual settings are heavy. This indicates the graphics pipeline is under strong load, but the exact FPS limiter should still be confirmed by the FPS ceiling analysis.
  • High CPU Load: If you see High CPU Utilization (85%+) paired with lower GPU utilization, the processor is handling a disproportionate share of frame preparation and game logic. That can point to CPU-side pressure, but it should not be treated as a direct replacement for FPS ceiling analysis.
  • Low CPU and GPU Load: If both CPU and GPU utilization are relatively low, it means the hardware is waiting on something else. This could be a game engine limitation, poorly optimized code, or an artificial framerate cap like VSync holding performance back. It does not mean both parts are equally fast in FPS terms.

Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.

Stardew Valley Requirements Comparison

See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.

CPU - Ryzen 7 7800X3D
cpu icon
34,293
Your Score
MinimumCore 2 Duo
RecommendedCore i3
GPU - RTX A4500 Embedded GPU
gpu icon
8,485
Your Score
MinimumGeForce 7 series
RecommendedGeForce GTX 460

Your CPU is 160% above and your GPU is 273% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.

CPU

+160%vsrecommended

GPU

+273%vsrecommended

CPU

+1465%vsminimum

GPU

+5712%vsminimum

Minimum Requirements
Video Card: GeForce 7 series
Processor: Core 2 Duo
Memory: 2 GB
Disk Space: 500 MB
System: Windows 10
Recommended Requirements
Video Card: GeForce GTX 460
Processor: Core i3
Memory: 4 GB
Disk Space: 1 GB
System: Windows 10

Frequently Asked Questions

1Can the Ryzen 7 7800X3D and RTX A4500 Embedded GPU run Stardew Valley well?

Yes, the Ryzen 7 7800X3D paired with the RTX A4500 Embedded GPU can run Stardew Valley smoothly up to 4k achieving around 62 FPS at Ultra quality. Your GPU is 273% above the recommended specs, and your CPU is 160% above the recommended requirements.

2Is there a more cost-effective setup to run Stardew Valley?

Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.

3Which component should I upgrade first to improve Stardew Valley performance?

For Stardew Valley, upgrading the GPU would give you the most noticeable improvement. The RTX A4500 Embedded GPU is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 4k low, 4k medium, 4k high.

4Does this setup support Frame Generation for Stardew Valley?

Stardew Valley does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.

5What are the minimum and recommended specs for Stardew Valley?

Stardew Valley requires at minimum a Core 2 Duo (CPU) and GeForce 7 series (GPU) with 2 GB RAM and 500 MB storage. For the recommended experience, you need a Core i3 and GeForce GTX 460 with 4 GB RAM. Your Ryzen 7 7800X3D and RTX A4500 Embedded GPU both exceed the recommended specs, so you're well-positioned for a great experience.

6How accurate are these Stardew Valley FPS estimates for the Ryzen 7 7800X3D and RTX A4500 Embedded GPU?

These Stardew Valley FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.

Performance estimates are based on synthetic benchmarks and hardware capabilities.

Results may vary based on drivers, OS, and background processes.