Optimized for mobile roots, the PC version offers higher resolution textures and volumetric shadows while keeping minimum specs low. It is light on the CPU but requires a dedicated GPU for stable 1080p/60FPS gameplay.
This game has a built-in FPS cap of 60 FPS
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, frame rates range from 28 to 55 FPS depending on quality settings. At 1440p, frame rates range from 33 to 66 FPS. At 4K, frame rates range from 17 to 42 FPS.
The RTX A500 Embedded GPU is 38% below recommended, but 114% above minimum for Genshin Impact. The Ryzen 7 7800X3D is 0% above the recommended CPU (Core i7).
At lower resolutions (all 1080p settings, all 1440p settings, 4k low), the Ryzen 7 7800X3D sets the FPS ceiling. As graphical load increases at (4k (high/ultra)), the RTX A500 Embedded GPU becomes the FPS-limiting side. The FPS ceiling is closely matched at 4k medium.
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1440p low, the Ryzen 7 7800X3D sets the ceiling at about 60 FPS, while the RTX A500 Embedded GPU could reach 133 FPS. In this scenario, the CPU limits the GPU potential by 55% (FPS gap: 73 FPS). Overall distribution: CPU limits 9/12 cells, GPU limits 2/12, balanced 1/12.
Your Ryzen 7 7800X3D is the limiting side in the heaviest mismatch. This means part of the RTX A500 Embedded GPU rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 50% | CPU Limits GPU 37% | CPU Limits GPU 38% | CPU Limits GPU 19% |
| 1440p (2K QHD) | CPU Limits GPU 55% | CPU Limits GPU 48% | CPU Limits GPU 46% | CPU Limits GPU 29% |
| 4K (Ultra HD) | CPU Limits GPU 18% | Balanced | GPU Limits CPU 18% | GPU Limits CPU 30% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU10% - 20% <> GPU31% - 42% <> | CPU10% - 20% <> GPU31% - 42% <> | CPU10% - 20% <> GPU31% - 42% <> | CPU0% - 7% <> GPU33% - 42% <> |
| 1440p (2K QHD) | CPU10% - 20% <> GPU39% - 58% <> | CPU10% - 20% <> GPU39% - 58% <> | CPU10% - 20% <> GPU39% - 58% <> | CPU1% - 7% <> GPU42% - 58% <> |
| 4K (Ultra HD) | CPU11% - 23% <> GPU53% - 66% <> | CPU11% - 23% <> GPU53% - 66% <> | CPU11% - 23% <> GPU53% - 66% <> | CPU1% - 11% <> GPU55% - 66% <> |
The Ryzen 7 7800X3D + RTX A500 Embedded GPU pairing runs this title with CPU utilization between 0% and 23% and GPU utilization between 31% and 66%. Ryzen 7 7800X3D keeps significant headroom across presets, while RTX A500 Embedded GPU is utilized efficiently without persistent saturation. As resolution scales, average GPU load rises from 37% at 1080p to 60% at 4K, while CPU averages move from 12% to 14%.
The utilization pattern is relatively even. The RTX A500 Embedded GPU reaches 60% average at its highest-load preset, while the Ryzen 7 7800X3D peaks at 17% average. This suggests a fairly controlled load distribution, but the actual FPS-limiting side should still be read from the limiter analysis above.
At 1080p, averages sit around CPU 12% and GPU 37%. At 1440p, that shifts to CPU 12% and GPU 49%, and at 4K it reaches CPU 14% and GPU 60%. This shows that GPU demand scales sharply with resolution while CPU load remains comparatively stable.
4K (Ultra HD) Low is the most balanced preset based on this dataset. It runs around CPU 17% (11-23%) and GPU 60% (53-66%), which keeps RTX A500 Embedded GPU well utilized without constant max-out behavior while Ryzen 7 7800X3D remains stable for consistent frame delivery.
Current utilization does not show an urgent upgrade requirement for either component; the Ryzen 7 7800X3D and RTX A500 Embedded GPU remain reasonably matched for this title.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 0% below recommended and your GPU is 38% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
+0%vsrecommended
-38%vsrecommended
+160%vsminimum
+114%vsminimum
The Ryzen 7 7800X3D and RTX A500 Embedded GPU will struggle to run Genshin Impact at smooth framerates. At 1080p Ultra, you can expect around 28 FPS which is classified as "struggling". Consider lowering settings or upgrading your hardware.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
For Genshin Impact, upgrading the CPU would have the biggest impact on performance. The Ryzen 7 7800X3D is currently the limiting factor — the RTX A500 Embedded GPU has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low. GPU-limited at: 4k high, 4k ultra.
Genshin Impact does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Genshin Impact requires at minimum a Core i5 (CPU) and GeForce GT 1030 (GPU) with 8 GB RAM and 100 GB storage. For the recommended experience, you need a Core i7 and GeForce GTX 1060 with 16 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Genshin Impact FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
