Bethesda's Creation Engine 2 is CPU-dependent, especially in cities, and requires an SSD for asset streaming. Optimization tends to favor AMD slightly, but generally requires powerful hardware to run smoothly.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 61 FPS. At 1440p, all settings exceed 62 FPS. At 4K, frame rates range from 45 to 71 FPS.
The RTX A6000 is 9% below recommended, but 55% above minimum for Starfield. The Ryzen 7 7800X3D is 89% above the recommended CPU (Core i5-10600K).
The RTX A6000 determines the performance ceiling at all 1080p settings, all 1440p settings, all 4k settings, executing at maximum capacity.
Approximated average price on current market:
Combo price: $3884. At 1080p Ultra, this combo delivers 61 FPS, equivalent to 0.02 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.028 fps/$ | 0.022 fps/$ | 0.017 fps/$ | 0.016 fps/$ |
| 1440p | 0.028 fps/$ | 0.023 fps/$ | 0.018 fps/$ | 0.016 fps/$ |
| 4k | 0.018 fps/$ | 0.016 fps/$ | 0.014 fps/$ | 0.012 fps/$ |
* Table values represent FPS per Dollar (higher is better)
At 1080p high, the RTX A6000 sets the ceiling at about 59 FPS, while the Ryzen 7 7800X3D has headroom up to 174 FPS. In this scenario, the GPU limits the CPU potential by 66% (FPS gap: 115 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your RTX A6000 is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 54% | GPU Limits CPU 61% | GPU Limits CPU 66% | GPU Limits CPU 65% |
| 1440p (2K QHD) | GPU Limits CPU 53% | GPU Limits CPU 61% | GPU Limits CPU 66% | GPU Limits CPU 65% |
| 4K (Ultra HD) | GPU Limits CPU 42% | GPU Limits CPU 47% | GPU Limits CPU 49% | GPU Limits CPU 48% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 89% below recommended and your GPU is 9% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
+89%vsrecommended
-9%vsrecommended
+147%vsminimum
+55%vsminimum
Yes, the Ryzen 7 7800X3D paired with the RTX A6000 can run Starfield smoothly up to 1440p achieving around 62 FPS at Ultra quality. Your GPU is 9% below the recommended specs, and your CPU is 89% above the recommended requirements.
This CPU + GPU combo costs approximately $3884 ($384 CPU (Rank #212 Value) + $3500 GPU (Rank #92 Value)). Your RTX A6000 is currently the main performance bottleneck and its market value ($3500) is actually higher than newer, faster alternatives. Trading it or upgrading could yield immediate profit and performance gains. For example, upgrading to the RTX PRO 4500 Blackwell for around $2399 (Rank #51 for value) could deliver noticeably better performance while costing less than your current GPU.
For Starfield, upgrading the GPU would give you the most noticeable improvement. The RTX A6000 is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Starfield does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Starfield requires at minimum a Core i7-6800K (CPU) and GeForce GTX 1070 Ti (GPU) with 16 GB RAM and 125 GB (SSD Obrigatório) storage. For the recommended experience, you need a Core i5-10600K and GeForce RTX 2080 with 16 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Starfield FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
