A competitor to Overwatch featuring environmental destruction, which makes it CPU heavy. DX12 and 12GB of RAM are the minimum requirements.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 168 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 115 FPS. At 4K, all settings exceed 67 FPS.
The TITAN RTX is 22% above the recommended GPU (GeForce RTX 2060 Super) for Marvel Rivals. The Ryzen 7 7800X3D is 57% above the recommended CPU (Core i5-10400).
The TITAN RTX sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $1587.96. At 1080p Ultra, this combo delivers 168 FPS, equivalent to 0.11 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.224 fps/$ | 0.171 fps/$ | 0.136 fps/$ | 0.106 fps/$ |
| 1440p | 0.149 fps/$ | 0.106 fps/$ | 0.086 fps/$ | 0.072 fps/$ |
| 4k | 0.079 fps/$ | 0.060 fps/$ | 0.054 fps/$ | 0.042 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1080p medium, the TITAN RTX sets the ceiling at about 257 FPS, while the Ryzen 7 7800X3D has headroom up to 483 FPS. In this scenario, the GPU limits the CPU potential by 47% (FPS gap: 226 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your TITAN RTX is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 38% | GPU Limits CPU 47% | GPU Limits CPU 44% | GPU Limits CPU 44% |
| 1440p (2K QHD) | GPU Limits CPU 31% | GPU Limits CPU 43% | GPU Limits CPU 44% | GPU Limits CPU 47% |
| 4K (Ultra HD) | GPU Limits CPU 31% | GPU Limits CPU 38% | GPU Limits CPU 40% | GPU Limits CPU 42% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU44% - 93% <> GPU76% - 93% <> | CPU44% - 93% <> GPU84% - 99% <> | CPU44% - 93% <> GPU84% - 99% <> | CPU49% - 94% <> GPU81% - 97% <> |
| 1440p (2K QHD) | CPU40% - 94% <> GPU93% - 100% <> | CPU40% - 94% <> GPU100% - 100% | CPU40% - 94% <> GPU100% - 100% | CPU40% - 93% <> GPU100% - 100% |
| 4K (Ultra HD) | CPU19% - 56% <> GPU93% - 98% <> | CPU19% - 56% <> GPU100% - 100% | CPU19% - 56% <> GPU100% - 100% | CPU19% - 55% <> GPU100% - 100% |
The Ryzen 7 7800X3D + TITAN RTX pairing runs this title with CPU utilization between 19% and 94% and GPU utilization between 76% and 100%. Ryzen 7 7800X3D stays in a controlled operating range, while TITAN RTX carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 89% at 1080p to 99% at 4K, while CPU averages move from 69% to 38%.
The utilization pattern is relatively even. The TITAN RTX reaches 100% average at its highest-load preset, while the Ryzen 7 7800X3D peaks at 72% average. This suggests a fairly controlled load distribution, but the actual FPS-limiting side should still be read from the limiter analysis above.
At 1080p, averages sit around CPU 69% and GPU 89%. At 1440p, that shifts to CPU 67% and GPU 99%, and at 4K it reaches CPU 38% and GPU 99%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
1080p (Full HD) Ultra is the most balanced preset based on this dataset. It runs around CPU 72% (49-94%) and GPU 89% (81-97%), which keeps TITAN RTX well utilized without constant max-out behavior while Ryzen 7 7800X3D remains stable for consistent frame delivery.
Current utilization does not show an urgent upgrade requirement for either component; the Ryzen 7 7800X3D and TITAN RTX remain reasonably matched for this title.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 57% above and your GPU is 22% above the recommended specs. High/Ultra at 1080p. Lower settings for higher resolutions.
+57%vsrecommended
+22%vsrecommended
+164%vsminimum
+100%vsminimum
Yes, the Ryzen 7 7800X3D paired with the TITAN RTX can run Marvel Rivals smoothly up to 4k achieving around 67 FPS at Ultra quality. Your GPU is 22% above the recommended specs, and your CPU is 57% above the recommended requirements.
This CPU + GPU combo costs approximately $1587.96 ($384 CPU (Rank #212 Value) + $1203.96 GPU). Your TITAN RTX is currently the main performance bottleneck and its market value ($1203.96) is actually higher than newer, faster alternatives. Trading it or upgrading could yield immediate profit and performance gains. For example, upgrading to the GeForce RTX 4070 Ti for around $799 (Rank #42 for value) could deliver noticeably better performance while costing less than your current GPU.
For Marvel Rivals, upgrading the GPU would give you the most noticeable improvement. The TITAN RTX is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Marvel Rivals does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Marvel Rivals requires at minimum a Core i5-6600K (CPU) and GeForce GTX 1060 (GPU) with 12 GB RAM and 70 GB storage. For the recommended experience, you need a Core i5-10400 and GeForce RTX 2060 Super with 16 GB RAM. Your Ryzen 7 7800X3D and TITAN RTX both exceed the recommended specs, so you're well-positioned for a great experience.
These Marvel Rivals FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
